McDonnell RF-101C Voddoo
SUN-RUN 4
- Subject:
McDonnell RF-101C Voodoo
US Air Force (1947-now)
363 TRW 56-0166 4/Cin-Min
Новамбар 1957 Operation Sun Run- Размера:
- 1:48
- Статус:
- Завршено
- Започето:
- December 16, 2022
- Завршено:
- June 28, 2023
- Време проведено:
- 280 hrs
Пројектни инвентар
Целовите макете
Фигуре
NATO Pilot seated in a/c (early 1960)
PJ Production 1:48
481118 /sr/search.php?q=*&fkMATEID[]=60714&showast=no&fkWORKBENCH[]=WB60714&page=projects&project=136832?
Фотоалбуми
Коментари
5 16 December 2022, 06:57
Desert Marlin
What's already been done:
1) Carve the inlets back
2) Remove formation lights
3) Scribe a ton of panel lines
More to do!
What's already been done:
1) Carve the inlets back
2) Remove formation lights
3) Scribe a ton of panel lines
More to do!
12 June 2023, 00:55
Desert Marlin
Painted the yellow bands first with Mr. Color H329 yellow. Mr. Surfacer 1500 underneath. Totally cleaned the plastic first. Coated the yellow with Tamiya Clear Lacquer finish. Used Mr. Color Leveling thinner to clean off the plastic that was not going to get the yellow bands. Then masked the yellow and proceeded to paint the silver. Started with Alclad Polished Aluminum first. Shows every single imperfection in the plastic. Have touched it up several times. Now finishing the aluminum panels up and making sure there are no worn through spots in the aluminum finish. Next will be using the Vallejo Polyurethane Gloss Varnish to seal the polished aluminum. Then decals. Kitty Hawk Decals...
Painted the yellow bands first with Mr. Color H329 yellow. Mr. Surfacer 1500 underneath. Totally cleaned the plastic first. Coated the yellow with Tamiya Clear Lacquer finish. Used Mr. Color Leveling thinner to clean off the plastic that was not going to get the yellow bands. Then masked the yellow and proceeded to paint the silver. Started with Alclad Polished Aluminum first. Shows every single imperfection in the plastic. Have touched it up several times. Now finishing the aluminum panels up and making sure there are no worn through spots in the aluminum finish. Next will be using the Vallejo Polyurethane Gloss Varnish to seal the polished aluminum. Then decals. Kitty Hawk Decals...
25 June 2023, 02:39