Nyhetsflöde
Skyhiker
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
17 bilder
Foke Wulf 190 F-8 (1997 tooling)Ny: 10 October, 14:19 1:72
Engine cowling painted.
Projekt: Focke-Wulf Fw 190 F-8
19 1 August, 17:22
Skyhiker
For a relatively new kit I am surprised on how much flash and fitting issues this kit has.
For a relatively new kit I am surprised on how much flash and fitting issues this kit has.
2 August, 04:46
Skyhiker
It's really hard for me to fight off the urge to correct the structural issues with this kit. But I promised myself I would make this one out of the box.
It's really hard for me to fight off the urge to correct the structural issues with this kit. But I promised myself I would make this one out of the box.
2 August, 11:32
Patrick Hagelstein
I've seen that promise before Skyhiker! 😂 Good luck keeping this one OOB! 😉👍🏼
I've seen that promise before Skyhiker! 😂 Good luck keeping this one OOB! 😉👍🏼
2 August, 20:39
Sergio Ordonez
Mate, I think you should put the windshield uspside down. The ángel does not cope with the real one as I see on photographs.
Mate, I think you should put the windshield uspside down. The ángel does not cope with the real one as I see on photographs.
2 August, 20:52
Skyhiker
Unfortunately it looks even worse the other way around. The idiot engineers at Revell should be fired.
Unfortunately it looks even worse the other way around. The idiot engineers at Revell should be fired.
2 August, 21:04
Sergio Ordonez
Well, I had some work with French engineers and I know shit happens. Could you take a photo with this one in the other position?
Well, I had some work with French engineers and I know shit happens. Could you take a photo with this one in the other position?
2 August, 21:09
Sergio Ordonez
drive.google.com/fil..J9/view?usp=drivesdk
The windshield is not an isoscelles triangle so the windshield has not a 45 degree ángel over the capot. Please, see these example of a TA-152 (and please, mind It is 35 years old and I was only 13 when I drestroyed It).
I think an easy solution can be made. I do not want any mate to be anoyed by an engineering issue. I had them everyday (it's my job, Factory engineering problem solving, known as 'shit managing") and It can destroy your mojo.
drive.google.com/fil..J9/view?usp=drivesdk
The windshield is not an isoscelles triangle so the windshield has not a 45 degree ángel over the capot. Please, see these example of a TA-152 (and please, mind It is 35 years old and I was only 13 when I drestroyed It).
I think an easy solution can be made. I do not want any mate to be anoyed by an engineering issue. I had them everyday (it's my job, Factory engineering problem solving, known as 'shit managing") and It can destroy your mojo.
2 August, 21:23
Skyhiker
After several hours of sculpting I got the canopy to fit better. I will continue with it tomorrow.
After several hours of sculpting I got the canopy to fit better. I will continue with it tomorrow.
3 August, 02:12
Sergio Ordonez
Your mojo works, mate! Now you have became a great problem solver!
On the other hand, I think another 3D engineering guy needs to stop drinking and 20 years of 2D drafting. The fitting is worse than I could imagine. But I see is no a problem for a seasoned mate like you. Great work, mate!
Your mojo works, mate! Now you have became a great problem solver!
On the other hand, I think another 3D engineering guy needs to stop drinking and 20 years of 2D drafting. The fitting is worse than I could imagine. But I see is no a problem for a seasoned mate like you. Great work, mate!
3 August, 05:17
Nicolas
Following. I build this kit several times in older versions. The fit of the canopy is realy sh*t. My solution was (with about 10 years) to sand the backside of the windshild till it fitted. Of corse so most of the frame is missing.
Following. I build this kit several times in older versions. The fit of the canopy is realy sh*t. My solution was (with about 10 years) to sand the backside of the windshild till it fitted. Of corse so most of the frame is missing.
3 August, 05:31
Thomas Kolb
What a struggle! It reminds me of some Heller and Amodel kits. But it looks that you manage to coax it into shape!
What a struggle! It reminds me of some Heller and Amodel kits. But it looks that you manage to coax it into shape!
3 August, 07:11
Skyhiker
Sergio the TA 152 had a very different canopy than the 190. The 152 was designed for high altitude flying, was pressurized and had double panes.
Sergio the TA 152 had a very different canopy than the 190. The 152 was designed for high altitude flying, was pressurized and had double panes.
4 August, 10:03
Sergio Ordonez
Thanks you, Skyhiker: I think I can remember now, as I researched about FW190 and TA152 black in the 90's. Also, canopy is bubble-shapped. Sorry, my FW190 Mustang have been gone forever, I expent the night trying to find It, just to find my solution, but I think only the reta of the TA152 has survived.
Thanks you, Skyhiker: I think I can remember now, as I researched about FW190 and TA152 black in the 90's. Also, canopy is bubble-shapped. Sorry, my FW190 Mustang have been gone forever, I expent the night trying to find It, just to find my solution, but I think only the reta of the TA152 has survived.
4 August, 14:05
Mr D
You done a better job of the seat belts than l did 🤣. The cockpit glass on my model was not very clear!
Looking good, ... Thanks for uploading 👍👍👍
You done a better job of the seat belts than l did 🤣. The cockpit glass on my model was not very clear!
Looking good, ... Thanks for uploading 👍👍👍
11 August, 15:13
Skyhiker
Mr D did you also have so much trouble with the canopy? I read in the kit review at the bottom of the page that it was bad. I really wish the reviews would be moved up because I always forget about them. It took me quite a while to get the canopy to work. It needed a lot of reshaping to look right.
Mr D did you also have so much trouble with the canopy? I read in the kit review at the bottom of the page that it was bad. I really wish the reviews would be moved up because I always forget about them. It took me quite a while to get the canopy to work. It needed a lot of reshaping to look right.
11 August, 17:40
Skyhiker
I decided to make my own blueprint for this plane. So, that's taking up a lot of my time at the moment.
I decided to make my own blueprint for this plane. So, that's taking up a lot of my time at the moment.
11 August, 17:42
Mr D
Hi, yes l had trouble too, l did a dry fit before paint, and l had to take a combination off the glass n some off fuselage, and had to use a bit of UV clear resin.
I got it to fit in the end, but it's not very clear to see through.
I had a bit missing of my engine fan too, had to make it up with super glue gell.
Hi, yes l had trouble too, l did a dry fit before paint, and l had to take a combination off the glass n some off fuselage, and had to use a bit of UV clear resin.
I got it to fit in the end, but it's not very clear to see through.
I had a bit missing of my engine fan too, had to make it up with super glue gell.
11 August, 17:48
★ Starfish ★
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
26 18 May 2022, 16:27
Simon Nagorsnik
Wow, a dio in 1/144- sounds interesting!
I can see the Feifel air filter on the tank, i think this one was used on earlier vehicles on the africa front.
I can't say exactly how long they were used later because these are normally no longer visible in later versions.
Wow, a dio in 1/144- sounds interesting!
I can see the Feifel air filter on the tank, i think this one was used on earlier vehicles on the africa front.
I can't say exactly how long they were used later because these are normally no longer visible in later versions.
18 May 2022, 17:09
HSC1932
What a great idea for a diorama! It's shaping up nicely. Is that a Dragon 1/144 Tiger?
What a great idea for a diorama! It's shaping up nicely. Is that a Dragon 1/144 Tiger?
5 September 2023, 00:10
★ Starfish ★
Thanks a lot HSC1932! The tank is a cheap diecast that I ordered from China and repainted later.
Thanks a lot HSC1932! The tank is a cheap diecast that I ordered from China and repainted later.
5 September 2023, 05:41
★ Starfish ★
I used a picture frame and structural paste to form the terrain. Then I used my new static grass applicator. As you will see soon, I scratch built my own trees to place the aircraft next to a little forest. The Tiger tank is a cheap diecast that I repainted. As some tank experts already told me, it's highly unlikely that this type of tank would have been in service late in the war. I still decided to use it but concealed the Feifel air filters under a tarp later. More details coming soon!
I used a picture frame and structural paste to form the terrain. Then I used my new static grass applicator. As you will see soon, I scratch built my own trees to place the aircraft next to a little forest. The Tiger tank is a cheap diecast that I repainted. As some tank experts already told me, it's highly unlikely that this type of tank would have been in service late in the war. I still decided to use it but concealed the Feifel air filters under a tarp later. More details coming soon!
20 October 2023, 17:33
★ Starfish ★
Here comes my second diorama in 1/144th scale which I call "The Last Stand". The (fictional) scenario is a group of infantry and a tank defending one of the last critical positions late in WWII. 2 Bachem Ba-349 Natter were abandoned before they could be launched against bombers. A video with all details about the building process can be found on my YouTube channel - I hope you like it!
Youtube Video
Here comes my second diorama in 1/144th scale which I call "The Last Stand". The (fictional) scenario is a group of infantry and a tank defending one of the last critical positions late in WWII. 2 Bachem Ba-349 Natter were abandoned before they could be launched against bombers. A video with all details about the building process can be found on my YouTube channel - I hope you like it!
Youtube Video
10 November 2023, 16:52
行 渡
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
15 24 April, 07:09
行 渡
There are still many parts to be installed and many details to be worked out, but cruising with friends is truly a joy. My Gneisenau is expected to be finalized this winter.
There are still many parts to be installed and many details to be worked out, but cruising with friends is truly a joy. My Gneisenau is expected to be finalized this winter.
6 August, 03:58
Mariusz S
vill ha den här artikeln
vill ha den här artikeln
Toyota 86 2012 Photo-Etched Parts Set
Aoshima 1:24
00512 10 October, 14:10
silverinho
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
18 22 November 2022, 07:28
Juskifo
Superbe bravo 👏
Vous auriez des peintures à recommander pour ce modèle ?
Merci d'avance
Superbe bravo 👏
Vous auriez des peintures à recommander pour ce modèle ?
Merci d'avance
10 October, 14:08
Daniel Kainz
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
19 bilder
Bf110E-2 Tropical Master Series Cyber Hobby | No. 5560 | 1:48Ny: 10 October, 14:05 1:48
Das erste mal das ich auch von innen Maskiert habe....
17 11 May, 16:41
Torsten Gerwin
markerade denna artikel som på beställning
markerade denna artikel som på beställning
MAZ-537G Late Production type with ChMZAP-9990 semi-trailer
Trumpeter 1:35
01065 2019 Nya delar Multi ämne (2)10 October, 14:03
/sv/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sv
35
35
/sv/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo