Nyhetsflöde

coporado
Build completed so far. Still waiting for the metal barrel. Quite challenging to attach the Zimmerit- PE parts. Was annoying when it comes to round shapes on the turret front armor. Treating those metal parts with some heat, made them much more handy to shape. First time using Friul tracks, very time consuming, but the best track result I´ve seen so far 🙂

Spanjaard
looks certainly good already🙂

coporado
Thanks bud!

coporado
Lower part of the tank was painted and received weathering. Tracks were mounted and connected. Rear fenders were the installed. Next is masking lower section and painting the upper parts.

Christoph Kunz
Nice job. I'm taking a seat.
Is it going to be some "Magdeburg-stuff" again?

coporado
Thanks, Christoph! This time its Normandy subject 🙂

Christoph Kunz
Next time I'll read the headline.
Stupid me...

coporado
The tank received several rounds of paint. Starting with red brown primer, followed by dark yellow as base color and finally the camo pattern. Next is detail painting, and weathering.

coporado
Initial weathering steps were conducted; chipping the Zimmerit and the metal surfaces.

coporado
Weathering of the exhaust section using acrylics and enamels.

Spanjaard
looks fantastic

Neuling
I agree. Very interesting dents and battle damage.

coporado
Thanks, Gentlemen! 🙂

Nick N
The exhaust looks awesome! How did you make that?

coporado
Thanks, Nick!
The exhaust was painted in a medium grey first. The parts having armor plates underneath were left in the original painting, as these area is less affected by heat and corrosion. Then a warm white followed by a reddish brown was applied using the sponge technique. Next was rust tones painted and blended with enamels. Colors of the original camo scheme where then applied with a sponge in the areas with less corrosion, to turn out the different stages of heat impact. Finally the upper parts received a slightly black shade to simulate the exhaust fume grime.

Nick N
Thanks a lot, this is very inspiring 🙂

coporado
Tank completed, time to start the dio 🙂

coporado
Kick off for the base. Styrofoam is the desired material for house, road and pavement. As the road and pavement is covered with lots of dirt and debris, I added cobblestone only randomly. For the road thin sheets of styrofoam were shaped using a 3D printed rolling pin. In order to create more texture the stones were carved with a pencil. For the pavement an old brush was used to shape the small stones. Everything was painted in several greyish, brownish, sandy tones with acrylics.

The shape of house was cut with the Proxxon hot wire. To make the facade more interesting I added some "decoration" around the upper windows. A border seperates the upper and lower floor. Next is closing the gaps between the decoration elements at the upper windows and cover the lower floor with wood.

Doubtingmango
Just found this. Stunning work with great narrative!

coporado
Thanks Doubtingmango!

coporado
Slowly taking shape. Lower floor fassade updated with some wooden panels. Dirt and debris was added to the road and pavement and painted with the airbrush. I used the same colors I used for weathering the tank tracks. Next is windows and door installation and of course detailing the interior.

Christoph Kunz
good work, in speciall the wood paint, tip top

coporado
Thank you Christoph! 🙂

Pietro De Angelis
Great work, congrats!

coporado
Thank you, Pietro! 🙂

coporado
Lower and upper floor and walls were detailed using Balsa wood and wallpaper. Added windows using Balsa and lasercut as well as some transparent plastic for the glas parts. Also the infantry miniatures arrived meanwhile.

coporado
Scratch built some interior from balsa wood and plastic residues. The attic floor was installed. Next is finally building the lower floor entrance and preparing the roof.

Rui S
I'm in 😎

coporado
Welcome aboard, Rui 🙂

coporado
More detailing on that house and a testfit with the first infantry guy.

Doubtingmango
The paint work on the tiger is fantastic

coporado
Thank you!

Zbynek Honzik
😃

Ben M
Looks like a pleasant place.

Martin Oostrom
Do we have the same wife 🤔

Lebloge
we are in the presence of a man of taste… Leffe blonde… triple Westmalle « que du bon »😄

Bozzer
Wife's first build in the UK.

Martin Oostrom
I'd love to see pictures of the build

Bozzer
I'm in the middle of creating an album mate. It'll be her SM debut 🙂

Nigel Chapman
Has the man cave become his 'n' hers?

Bozzer
There's always been a spot in the new cave, for the Mrs, Nigel. But, it's getting tighter, with all the kits I've got.

Martin Oostrom
If you're in need of space, I'm more than willing to offer a ridiculously low price for some of your gorgeous kits. 😁

Chris T. An
This is the first time for me to tackle a complete resin kit. And when I look at the individual parts, it will be a real challenge. There is an extreme amount of rework needed on each part. Hope I can get it to work.

Finn
Best of luck, it will be interesting to follow

Michael Kohl
I am in too

Robert Podkoński
I will watch with pleasure and interest too.

Alex K
A 3D-printed PZL Dromader???!!! Following for sure!! (The Grand Models cast-resin kit is perhaps above my skills - and I still wait for the Karaya injection one...). Your ag-aircraft & ground equipment dio will turn... monumental! 👍

Marcel Klemmer
Very interesting project👍 I am in

Villiers de Vos
Very nice progress on an unusual subject.

Chris T. An
Thank you all for watching. Alex, I also saw the Grand Models kit for the M18, but I was frightened from some build reviews, there is a lot of rework to do on that kits. I have now the same or a bit more work, but I got the 3D file for free from Thingiverse.

I am really not a Pro in sratch building but I will try to engrave some panel lines and add some more greeblies to the plane. The 3D file is very poor in details.

Alex K
Nice progress! 👍

Robert Podkoński
Fantastic Dromader! (I wish I had one... I have no access to 3d printing, alas...😭 )

Chris T. An
Robert, you can have a look to the Grand Models resin kits. I am much more disappointed that there is no kit in 1:72 and no 3D file of a PZL 106 Kruk. I would spend some money on that because it would fit perfect to the Dromader and Cmelák.

Robert Podkoński
Actually, that is something that makes me angry too - I would love to see (and buy) decent kits of "Wilga" and "Kruk" (not mentioning PZL M-15 "Belphegor" 😉 )... but apparently no Polish manufacturers are interested in preparing these.

Alex K
Guys... let's look a bit at the bright side: who would have thought a few years ago that one day (today!) there would be kits of the Cmelak, the Dromader, the Grumman AgCat (in both 1:72 & 1:48!!!), the Piper Pawnee?! Some are short-run, some are cast-resin, some are 3D-files-to print - nevertheless, something is slowly moving towards that direction! So, yes, I do hope too there will be someday a Kruk available in 1:72 or a Belphegor! And your buys of such kits and your modelling work proves that there's some interest in such topics! Keep it up! 👍

Robert Podkoński
You're right, Alex 🙂 "Always look on the bright side of life..." 😉

Robert Podkoński
I am afraid there is a spelling error on the decals, Chris... I see "Dromedar" instead of "Dromader"... The plane looks awesome!

Chris T. An
Robert, I can understand that it is confusing, but in the GDR, "Dromedar" was actually used. This is the German translation of the word. Feel free to search for pictures of it, here would be an example: [img1]

Robert Podkoński
I have not known about that, sorry Chris... That's really interesting.

Alex K
Nice trivia... and as Robert said: it looks awesome!

Bernhard Schrock
Dromader: An outstanding result from such a simple kit!

Neuling
Everything top notch here! But what about the excavator? May a combined diorama?

Chris T. An
The excavator is still coming. I haven't dared to go any further yet. Let's see, maybe I'll get motivated again in the fall/winter. 😉

Neuling
👍

Michael Kohl
Very well done Dromedar. Anxious about the excavator.

Villiers de Vos
Fantastic work on the crop duster.

Chris T. An
It is not easy to find out with which lettering the excavator was delivered in the color used in the respective year of construction. I'll have to see which decals I print out.

Ben M
What a great project! You got an amazing result with the 3d printed aircraft.

Scot R
Following alone. I have a a similar project in a box waiting for the right inspiration.

Robert Podkoński
Taking a seat!

Andrzej Rygiel
Whoa, I have an audience now! 😄 Hope that I do not embarrass myself - if you have any comment on things that could had been done differently, I'm open to suggestions.

Ben M
👀

Bruce Huxtable
Very successful painting - looks great!

gorby
Nice work.

Spanjaard
very nice

Robert Podkoński
Great job, Andrzeju!

René "Lord Bilbo" Bartholemy
Taking a seat!
Will you build it OOB?

GUILLAUME C
Hi, Thanks. Mainly OOB, with some improvements, like on the engine where rods where missing.

Robert Podkoński
Taking a seat too.

Michael Kohl
Anxious to see how you replicate the metal structure at the cowling.

GUILLAUME C
I will left this uniform, to hard to have te same result as real at this scale.
I've tried before, on spare part, with 2 metal colors and even if I use my 0.2mm airbrush, the result is awfull

GUILLAUME C
@Michael Kohl, Hope the result will enjoy you.

Robert Podkoński
Fantastic job, Guillaume!

Guy Rump
Time for a change with a 1/35 vehicle. 🙂

J35J
I'm in!👍🏻

Guy Rump
Made a start on the armoured car with the underside started. 🙂

A warm welcome J35J. 👍

Many thanks mates for your interest and likes Marc, Lukas M, Живко Джаков,  Villiers DV & Dom S. 👍

Guy Rump
Painted the interior with AK Creme Weiss. 🙂

Many thanks mates for your interest and likes Andrew B, Pietro DA, Tom B, Karel D & Chris. 👍

Guy Rump
The upper and lower parts now together and other parts added. Next will be primer. 🙂

Mr D
Hi Guy 👋😃👍
Taking good shape now, has it all gone together ok so far..?? Tamiya are usually good?
I've only do one armour model....the Airfix Sherman 1/72 ....was a gift.
Best of luck with next steps 👍👍

Guy Rump
Primer is now on! Next is the undercoat colour. 👍

Many thanks Mr D for your kind comment. It's fitted together really well as you'd expect. I'm experimenting with this one with a bit of weathering and chipping, hopefully it will turn out ok. 👍

Many thanks mates for your interest and likes Jan P, RolfRolf & Lukas M. 👍

Guy Rump
Undercoat painted on (Vallejo model air black). Next will be the main colour. 🙂

Many thanks mate for your interest and like Mr D. 👍

Guy Rump
RLM79 added as final coat. Next will be main body weathering. 🙂

Guy Rump
Wheels added and first bit of the weathering done, the chipping effects. Next will be to start to add all of the ancillaries. 🙂

Guy Rump
I now declare the Sd.Kfz 223 complete. It is in the markings of 15 Armd Div Afrika Korps. 🙂

Many thanks mate for your interest and like Mark S. 👍

Guy Rump
Thanks mates for your likes, it's appreciated. 👍