Nyhetsflöde
Christian W
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
13 3 May, 04:49
Christian W
Damned, how far will I go? Found a quite interessting wip on modelcarsmag (modelcarsmag.com/for..-mpc-72-pontiac-gto/) with a lot of work on the fitting ...
Damned, how far will I go? Found a quite interessting wip on modelcarsmag (modelcarsmag.com/for..-mpc-72-pontiac-gto/) with a lot of work on the fitting ...
3 May, 07:48
Martin Oostrom
I'm not sure I like the front end of that car.
Let's see what you'll make of it
I'm not sure I like the front end of that car.
Let's see what you'll make of it
3 May, 20:16
Christian W
The front end was an issue ever. Im not the biggest fan too. I was buying this because I thought it was built in 1973 too. But the 1973 GTO is a totally other car and this kit doesn't fullfill the requirements of our annual group build of our "club".
After looking through that wip, ... I think I will not go that far. But one I will do: reduce the gaps at the front. They are really present.
The front end was an issue ever. Im not the biggest fan too. I was buying this because I thought it was built in 1973 too. But the 1973 GTO is a totally other car and this kit doesn't fullfill the requirements of our annual group build of our "club".
After looking through that wip, ... I think I will not go that far. But one I will do: reduce the gaps at the front. They are really present.
4 May, 21:07
Christian W
I started this GTO in between because the Charger sucks a little or my mind gives me the order that I have to work on several kits at the same time.
I was in the mood, to get this car painted. So I get some spots sanden on the body, fillered it and gave it a kind of green-turquis-blueish. This rattle can is on of the leftover of the 1977 Firebird (1977 Pontiac Firebird Coupe | Project by christian-w (1:25)) color I bought, when I was looking for the right color. I think it works on this car good.
I started this GTO in between because the Charger sucks a little or my mind gives me the order that I have to work on several kits at the same time.
I was in the mood, to get this car painted. So I get some spots sanden on the body, fillered it and gave it a kind of green-turquis-blueish. This rattle can is on of the leftover of the 1977 Firebird (1977 Pontiac Firebird Coupe | Project by christian-w (1:25)) color I bought, when I was looking for the right color. I think it works on this car good.
5 August, 04:26
Christian W
Next steps are done. The body got it's clear cote, undercarriage and interior is painted too. It's good. Now I'm thinking about how to get a little more shade into the interior color. It's to close to the body color.
Next steps are done. The body got it's clear cote, undercarriage and interior is painted too. It's good. Now I'm thinking about how to get a little more shade into the interior color. It's to close to the body color.
7 August, 18:57
Christian W
Smart idea! Maybe this klear yellow from Tamiya could work too. I have to give that a try.
Smart idea! Maybe this klear yellow from Tamiya could work too. I have to give that a try.
8 August, 05:40
Christian W
I painted the interior. First i tried with tamiya smoke to go over it but I wasn't satisfied. Then I went through my metallic paints and grabbed #397 (Car Metallic Plane Tree Green) and mixed a little #60 (Yellow Green) into it. Maybe 10%. I think it's not that bad so far.
Now I think about to take the same mixture for my 1977 Firebird 🙂
I painted the interior. First i tried with tamiya smoke to go over it but I wasn't satisfied. Then I went through my metallic paints and grabbed #397 (Car Metallic Plane Tree Green) and mixed a little #60 (Yellow Green) into it. Maybe 10%. I think it's not that bad so far.
Now I think about to take the same mixture for my 1977 Firebird 🙂
4 September, 19:33
Christian W
Thank you! It could be, that I go over it another time. It depends on, how it works together with the exterior color. It might be a little to green 😉 The body looks more blueish. Darker. Dirtier 😉 Somehow.
Thank you! It could be, that I go over it another time. It depends on, how it works together with the exterior color. It might be a little to green 😉 The body looks more blueish. Darker. Dirtier 😉 Somehow.
6 September, 08:21
Miguel Vaquero
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
8 bilder
Polikarpov U-2/Po-2Ny: 15 September, 19:08 1:48
Let's start with this beautiful plane. Built by ICM in 1/48, it's the biggest scale model I'm going to make up to this d...
Projekt: Polikarpov U-2/Po-2
1 9 September, 18:39
Miguel Vaquero
Next proyect, this beautiful pre war plane. I've always liked this plane, so when I saw this kit fairly cheap I couldn't resist to buy it. I will make camouflage pattern, even though the book comes with two livery possibilities. This time around, the build Is going to be completely out of the box.
Next proyect, this beautiful pre war plane. I've always liked this plane, so when I saw this kit fairly cheap I couldn't resist to buy it. I will make camouflage pattern, even though the book comes with two livery possibilities. This time around, the build Is going to be completely out of the box.
15 September, 16:52
Peter L Thunø
vill ha den här artikeln
vill ha den här artikeln
PT-76B Light Amphibious Tank Value Package for Trumpeter 00381
E.T. Model 1:35
S35-015 200* Nytt verktyg 15 September, 19:07
Simon Nagorsnik
äger denna artikel
äger denna artikel
U.S. Soldiers Winter 1944/45
White Stork Miniatures 1:72
F72063 15 September, 19:07
Recce 4-6
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
6 bilder
Panzerjäger der BundeswehrNy: 15 September, 19:05 1:35
The KaJaPa from „Das Werk“. Nice kit.
Projekt: VT 1-2: The StuG for the Eighties
6 11 July 2022, 18:37
Guy Rump
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
20 20 July, 14:57
Guy Rump
Another post war aircraft, remember these when we lived at Leuchars low flying over the married quarters. 🙂
Another post war aircraft, remember these when we lived at Leuchars low flying over the married quarters. 🙂
20 July, 14:59
Guy Rump
Made a start on the Phantom. Cockpit and pilots plus internal decals added. 🙂
Welcome as always Nicolas & Ekki. 👍
Many thanks mates for your interest and likes Andre K, NordMito, Lukasz G, zhsv, J35J, Villiers DV, Bernd G & 1 other mate. 👍
Made a start on the Phantom. Cockpit and pilots plus internal decals added. 🙂
Welcome as always Nicolas & Ekki. 👍
Many thanks mates for your interest and likes Andre K, NordMito, Lukasz G, zhsv, J35J, Villiers DV, Bernd G & 1 other mate. 👍
6 September, 16:35
Guy Rump
Weights added to the nose. Internal part where cockpit will go sprayed Vallejo Model Air intermediate blue. Engine intake internals painted Vallejo Model Air Insignia white. 🙂
Many thanks mates for your interest and likes Mr D, Sukhoi242 & Austin LAI. 👍
@Rolf Rolf, Thanks for the kind comment. The kit is quite complex with a lot of parts and, as with some of the newer Airfix kits you have to be accurate as the fit is very tight. Other than that, so far, so good! 👍
Weights added to the nose. Internal part where cockpit will go sprayed Vallejo Model Air intermediate blue. Engine intake internals painted Vallejo Model Air Insignia white. 🙂
Many thanks mates for your interest and likes Mr D, Sukhoi242 & Austin LAI. 👍
@Rolf Rolf, Thanks for the kind comment. The kit is quite complex with a lot of parts and, as with some of the newer Airfix kits you have to be accurate as the fit is very tight. Other than that, so far, so good! 👍
8 September, 16:31
Guy Rump
Intakes added to fuselage and cockpit added. 🙂
Welcome Segej! 👍
Many thanks mates for your interest and likes Tibor S & Matti T. 👍
Intakes added to fuselage and cockpit added. 🙂
Welcome Segej! 👍
Many thanks mates for your interest and likes Tibor S & Matti T. 👍
12 September, 14:52
Mike Montgomery
I wonder if they got the engines right for the RAF Phantom. That's one area where kit manufacturers constantly get wrong.
I wonder if they got the engines right for the RAF Phantom. That's one area where kit manufacturers constantly get wrong.
13 September, 13:04
Guy Rump
Fuselage now together. 🙂
Welcome DerMattes, Dave & Mike. 👍 @Mike, not certain about the engines, not an expert at all. 👍
Many thanks mates for your interest and likes Sergej I, Mona, Dave F, Maciej B & Arif S. 👍
Fuselage now together. 🙂
Welcome DerMattes, Dave & Mike. 👍 @Mike, not certain about the engines, not an expert at all. 👍
Many thanks mates for your interest and likes Sergej I, Mona, Dave F, Maciej B & Arif S. 👍
15 September, 15:27
Simon Nagorsnik
äger denna artikel
äger denna artikel
Willy's Jeep front grill (2 pcs.) - S-Model -
Rescue Models 1:72
72006 15 September, 19:05
NICOLAS GRANDMONTAGNE
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
12 1 September, 16:49
Peter L Thunø
vill ha den här artikeln
vill ha den här artikeln
Russian PT-76 Light Amphibious Tank Photo-etched Fender for Trumpeter
E.T. Model 1:35
E35-082 200* Nytt verktyg 15 September, 19:04
Paul Riley
vill ha den här artikeln
vill ha den här artikeln
FRS.1 Sea Harrier Falklands 40th Anniversary (includes Royal Navy Tow Tractor)
Kinetic 1:48
K48138 (48138) 2022 Nya delar 15 September, 19:03
Moreno Baruffini
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
6 9 September, 18:08
Moreno Baruffini
During the summer I wasn't idle, but I started some projects 😜.
This is the biggest, that I'll try to keep active in the following months.
During the summer I wasn't idle, but I started some projects 😜.
This is the biggest, that I'll try to keep active in the following months.
15 September, 11:06
Casey Rupley
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
51 3 October 2021, 16:53
Casey Rupley
First time posting a work in progress album. Decided to get crazy with the interior and scratch built everything in the 2nd and 3rd rows because the kit is completely wrong for the military version of this bird. Interior is now done. Next up are the rotors, then I'll begin assembling the puzzle of the exterior - it's a ton of small pieces instead of fuselage halves.
First time posting a work in progress album. Decided to get crazy with the interior and scratch built everything in the 2nd and 3rd rows because the kit is completely wrong for the military version of this bird. Interior is now done. Next up are the rotors, then I'll begin assembling the puzzle of the exterior - it's a ton of small pieces instead of fuselage halves.
3 October 2021, 17:17
Andrew Horton
Wow! Great start, Casey! I look forward to seeing this project completed.
Wow! Great start, Casey! I look forward to seeing this project completed.
3 October 2021, 22:53
Casey Rupley
Thanks, Daniel and FLM! Will hopefully have rotors done this weekend and fuselage well on its way. Daniel - your interior is making mine look like childs play, but I like the motivation it provides to step up my game.
Thanks, Daniel and FLM! Will hopefully have rotors done this weekend and fuselage well on its way. Daniel - your interior is making mine look like childs play, but I like the motivation it provides to step up my game.
15 October 2021, 21:16
Guillaume Boulanger
Folowing, i like your work and comment on the photo help great.
Folowing, i like your work and comment on the photo help great.
19 October 2021, 16:51
Casey Rupley
Thank you, Guillaume!
More progress has been made. Main rotors done and the fuselage is starting to come together, bit by bit. Many thanks to the notes and pictures posted by Bernhard Schrock when he built this kit.
Thank you, Guillaume!
More progress has been made. Main rotors done and the fuselage is starting to come together, bit by bit. Many thanks to the notes and pictures posted by Bernhard Schrock when he built this kit.
21 October 2021, 17:55
Casey Rupley
Sorry for the 6 month delay. I haven't worked on this one for a while (was taking a break from everything, then finished my USS Reuben James ship), but I discovered I had pictures and progress I hadn't yet posted. So here you go! I'll be picking this up again next week. I'm almost at the point where it's ready for paint.
The fit has been pretty horrible - all the panels around the engine were horrible, and the clear pieces that make up the forward cockpit/doors left a sizeable gap. I put comments on each of the pictures to explain myself.
Sorry for the 6 month delay. I haven't worked on this one for a while (was taking a break from everything, then finished my USS Reuben James ship), but I discovered I had pictures and progress I hadn't yet posted. So here you go! I'll be picking this up again next week. I'm almost at the point where it's ready for paint.
The fit has been pretty horrible - all the panels around the engine were horrible, and the clear pieces that make up the forward cockpit/doors left a sizeable gap. I put comments on each of the pictures to explain myself.
4 May 2022, 21:51
Daniel
Awesome work with all these little extras, will look great in paint I think👍🏻
Awesome work with all these little extras, will look great in paint I think👍🏻
5 May 2022, 07:03
Casey Rupley
Finally primed, pre-shaded, and painted. Next up will be clear coat and decals.
Finally primed, pre-shaded, and painted. Next up will be clear coat and decals.
4 June 2022, 23:30
Casey Rupley
More progress. The helo is sitting on her own legs now, paint has been touched up, decals applied, and a lot of parts and details added. Only a few things left to do at this point, so I hope to have it done shortly. It's been fun (I think), but I'm ready to move on.
More progress. The helo is sitting on her own legs now, paint has been touched up, decals applied, and a lot of parts and details added. Only a few things left to do at this point, so I hope to have it done shortly. It's been fun (I think), but I'm ready to move on.
25 July 2022, 16:01
Daniel
Fantastic clean detail work and the painting is spot on as well - really nailed these softer camo edges, congrats casey 👍
Fantastic clean detail work and the painting is spot on as well - really nailed these softer camo edges, congrats casey 👍
9 August 2022, 16:29
Casey Rupley
Thank you, Florian and Daniel! Yeah, soft edges are a pain and I'm always relieved when they're done.
Thank you, Florian and Daniel! Yeah, soft edges are a pain and I'm always relieved when they're done.
11 August 2022, 15:44
Dal Pont Andrea
äger denna artikel
äger denna artikel
F-16 TAT & ADP
Wolf 3D Resin Parts 1:48
WOL481103 15 September, 19:00
Dal Pont Andrea
äger denna artikel
äger denna artikel
F-16C pos light plates without stiffener plate
Wolf 3D Resin Parts 1:48
WOL481114 15 September, 19:00
/sv/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sv
35
35
/sv/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo