Nyhetsflöde

Marcin Terlikowski
very nice painting/shadows on panels.

Bernhard Schrock
Great Job! Looks for me like DIY dressed skin?

Mr D
Very 👍👍 nice.
The Rising sun decals look painted on and looks good. Nice job, lm yet to build a WW2 Japanese fighter.
Antenna is good too.....is it thread or stretch spru ??

Guy Rump
Lovely job! 👍

Weizenbrot
Thank you Marcin!

Weizenbrot
Thank you Bernhard. Yes it is, I will upload some more pictures for the process.

Weizenbrot
Hi Mr D. Haha they are painted on. I tried to use as less decals as possible except somethings like the Japanese "No Step" which is too complicated for me XD. The Antenna is 0.05 mm copper wire.

Weizenbrot
Thank you Guy!

Marcin Terlikowski
I finished exactly the same one few weeks ago. What color is on fuselage?

Weizenbrot
Hi Marcin. It was Mr. Hobby's Kawasaki Green for base. For highlight I added some yellow and white. For shadow I added Japanese propeller or any brown in red tone will work.

CaptGPF
Agree with Marvin - beautiful work!

Mr D
Really nice detailed finish, Nice Japanese green 👌
Can l ask what you used the Dremel for..??
Like it 👍👍👍

John
Great result and attention to detail. Riveting job, chipping and paintjob, all top-notch 👍

Weizenbrot
Thank you, CaptGPF!

Weizenbrot
Hi Mr D, did you mean the power tool? I used it to sand along rivet lines to create a stressed skin effect.

Weizenbrot
Thank you John for your like!

Kate Ward
It looks great!

Weizenbrot
Thank you Kate!

Steve Hancock
Beautiful work

Ludvík Kružík
I still miss this small helicopter in my collection of flying machines used in Czechoslovakia. The time has come for me to rectify that. 😉

Villiers de Vos
I will follow along.

Ludvík Kružík
Welcome Villiers! 🙂

Greg Baker
Oh. I built a 1/72 version of the Mi-1M... This should be interesting.

Ludvík Kružík
Hello, Greg. I know there's a Mi-1M kit in 1/72nd scale. Unfortunately, only this and a rather old kit from Special Hobby exists in 1/48 scale. In addition, this kit is an older version of the Mi-1A, which is different from the upgraded version of the Mi-1M. It has a different nose shape, different cockpit glazing and other minor changes. And since I decided to build the upgraded version of the Mi-1M, I will not avoid modifications to the kit.
To give you a better idea of the extent of the modifications to the kit, I've included a picture with the differences between the Mi-1A and Mi-1M versions color coded.

Greg Baker
Oh, neat! I didn't realize there were so many changes between the versions. This is going to look great!

Ludvík Kružík
Greg, thank you for your support.
____________________
I started building the model by making new transparent parts.

Alec K
Taking a seat, this brings back memories of ABC magazine 😜👍

gorby
Nice work moulding the new transparent parts.

Greg Baker
Yeah. Nice work on the heat-n-smash moulding for the clear parts. That can be tricky to do.

Ludvík Kružík
@Alec K
I used to buy ABC magazine regularly as a kid and eagerly awaited each new issue 🙂. I assume your mention of ABC magazine refers to the occasional modeling tutorial section.

@gorby, @Greg Baker
It's not too difficult to make new transparent parts by stretching warmed transparent foil over a pre-made template. Preparing the template is the most work. Stretching the warmed foil onto the template is just a routine that anyone can do after a few attempts.

Alec K
Correct 🙂👍👍

Robert Podkoński
How have I missed this? Taking a seat for sure! 🙂

Ludvík Kružík
Hello, Robert! Good to see you here. You haven't missed much so far. Up to this point I've been more concerned with preparation than building the model.

Ludvík Kružík
I want to try to use the sandwich construction in the production of new glass parts for the coptics. So I made (using the same process as the transparent parts) parts out of white plastic sheeting. These parts will have holes cut out for the windows. The transparent part will then be inserted between these two parts. The white outer and inner parts will form the embossed framing of the transparent part.

Jennifer Franklin
That looks great (as per usual 😛)

Ludvík Kružík
Welcome, Jennifer, we're glad to have you on board and thank you for your goodwill. 🙂

Ludvík Kružík
I came back from vacation and it started to rain. Ideal conditions for modelling. 🙂

So I'm back and continuing to work on the model. I need to glue the finished nose to the glued fuselage so the cockpit overlay fits exactly. That determines the workflow. First I have to finish the nose and the inside of the fuselage and glue all the parts that need to be glued to the fuselage halves from the inside. After gluing the fuselage halves together, I would no longer be able to get to these parts (or only with great difficulty).

Photos of the work progress will be coming soon.

Alexander Grivonev
Oh some modeling for big boys, not glueing perfectly fitting parts together and throwing on some paint! Following 👍

Ludvík Kružík
Welcome, Alexander! 🙂

Ludvík Kružík
I glued several parts to both halves of the fuselage. These parts are glued from the inside, so they have to be glued before the fuselage is closed.
I also started working on making new parts for the cockpit.

Landlubber Mike
Wow, this is incredible work Ludvik! Thank you for sharing your steps - I've learned a lot from your pictures and descriptions!

Villiers de Vos
Fantastic scratch build skills.

Ludvík Kružík
@Landlubber Mike
Mike, thank you for your interest. Welcome aboard!
I've had the idea for this rebuild in my head for a few years now. Mainly because I've been waiting to see if anyone would start making 1:48 scale Mi-1M kits. Unfortunately, to this day, no manufacturer has this kit in their lineup. So I decided not to wait any longer and start building a model from what I have available.
My rebuild is just beginning. Most of the work on the model is yet to be done. I'd also like to try some new techniques that came to mind while planning to build this model.

@Villiers
Thank you for the compliment. I appreciate it very much.

Ludvík Kružík
I didn't have much time today, so I didn't make much progress on the build. But every little bit of progress counts. 😉

J35J
Great progress and detailing! Following

Bruce Huxtable
Wow! You don't shy away from challenges! Watchinh with admiration, and hoping to learn lots too. Hoping you are not amongst the floods? Stay safe!

Ludvík Kružík
J35J welcome! I hope you like it here.

Bruce, I like a challenge like that. I like to experiment and enjoy thinking of and then implementing ways to improve my model.

I appreciate your concern for my safety. I live in a town in the highlands that wasn't badly affected by the floods. Only the river that runs through our town has increased flow, but it hasn't spilled out of its bed. Moreover, our house is 80 metres above the river, so even if the river had spilled out of its bed, it would certainly not have reached our house.

Bruce Huxtable
It sounds an idyllic location.....Opravdu, česka příroda je krasná....

Ludvík Kružík
Bruce, thank you for the compliment. I'm sure the nature is beautiful in England too. 😉

Ludvík Kružík
I'm slowly continuing to make small parts.

Alec K
Nice progress, this will be a beauty 👍

bughunter
Another big bunch of parts, not to mention some kit parts, come together to form one big model! Not to be missed!
I'm late, but I have an excuse. First I was on holiday, and then this stupid C-virus knocked me out.

Ludvík Kružík
Alec, thank you for your support and your kind words.

Welcome, Frank. I hope you're okay, and I'm really glad you're one of my guests.
It's definitely not too late. I still have most of my work ahead of me. In fact, you could say I'm just getting started.

TH SCALE MODELS (Thomas Haberl)
Uhhhhhh … this is going to be another good one from you! I'm in 👍

Ludvík Kružík
Thomas, welcome. It's good to see you among my guests. 🙂

Ludvík Kružík
I'm struggling with time rather than the model at the moment. At least I managed to draw a new dashboard. After printing it in scale (1/48) on photo paper I will use it instead of the kit part.

John
Another Ludvik conversion build with all the accuracy and attention to detail.we've come to expect. It's looking good, can't wait to see the final result! 👍

Ludvík Kružík
Welcome, John. Please have a little patience. This project is quite demanding and I will need a lot of time to complete it.

John
Ok, I aimed that to "I can wait to see the final result" (but I'm still eager) 😉

Alec K
Wow, the dashboard looks amazing. I can only imagine how much time that took. Really interested how it looks completed 👍

Ludvík Kružík
Alec, I drew the dashboard in the evenings for 5 days (about 3 to 4 hours each day). Add to that additional time (about 5 hours) for test printing and subsequent corrections.

I am attaching a photo of a test black and white print of the dashboard after all the modifications are complete. I will print the dashboard for the model in color later.

Ludvík Kružík
According to the photos I modified the fuselage where the main landing gear is attached to it.

Guy Rump
Looking good, following. 👍

Jakub Biganovsky
Good morning.
Realy nice and fine work.

Robert Podkoński
These modifications are just perfect, Ludviku...

Ludvík Kružík
Guy, Jakub and Robert thank you for your comments, it's a nice encouragement for further work.

After today, the hull is glued together. Now I'm adjusting the shape of the transparent cockpit cover.

Ben M
I continue to enjoy seeing this one take shape. Quite the effort to convert it!

Ludvík Kružík
Hello, Ben. I'm glad you're interested in my project.

Greg Baker
This is looking good!

Ludvík Kružík
Thank you Greg!

Villiers de Vos
Starting to take shape.

Ludvík Kružík
Villiers, the completion of the fuselage is only temporary at this time. It's only to modify the shape of the transparent cockpit cover.
Once the cockpit cover is the correct shape, I will take the fuselage nose down again to continue work on the cockpit interior.

Ludvík Kružík
Work on the model continues with the production of the cockpit.

Greg Baker
This is becoming a scratchbuilding masterclass!

István Szücs
Interesting project!

J35J
I'm in for the flash flesta 😅👍🏻

Robert Podkoński
Make yourself comfortable, István and J35J. This will be surely a long party... 😉

István Szücs
Robert, almost you'd build an A-Model kit

Robert Podkoński
Believe me, István, A-model kits are much more modeller-friendly than Mach 2... Take a look here, for example: modelingmadness.com/..korean/us/hammx2.htm

Ben M
Another member of the non-aligned movement.

Marko
That's something to be excited about. Mach2 kits don't have the reputation of being shaking kits. 👍

Martin
As I said on the project, I wish you luck with this, it is something you seldom see, but it looks cool in the end. It is quite a long time ago when I did mine - al the best!

and, so far it does not look that bad for a mach2

S M
Gotta see this! 😄

John Hughes
This looks very Gerry Anderson, so I'm in!

Robert Podkoński
What an audience I have... I feel a bit under pressure now 😉 @Martin - you're right, at least the polistyrene seems to be of a good quality.

Guy Rump
I'm watching as well Robert 🙂 👍

Ekki
And me.

Robert Podkoński
Feel warmly welcomed, Mates!

Mid Franconian
Extra like for the striking project title 😂! I expected an old KP kit first…

Bruce Huxtable
Soo many seams.... Watching this tutorial for sure 😉. OMG, Robert, that's quite a critique of MACH, kits.... Good Luck!

Ben M
It's such a cool subject, I remember seeing it in my dads airplane books when I was young.

Ludvík Kružík
Robert, once again you have chosen a great topic. The French experimental jet powered Leduc aircraft looked really futuristic at the time of its creation.
I wish you strong nerves and a lot of fun building your model!

Robert Podkoński
Now I feel even more pressure 😉 ... @Bruce - I know what I am talking about, I have completed a few models from both producers already 😉 @Ludvik - I was lucky enough to see both Leduc 010 and 022 in Le Bourget museum and they still look futuristic imho 🙂

Palo M
Grabbing a sear

Robert Podkoński
Welcome, Palo!

Ludvík Kružík
He certainly wouldn't be a disgrace as a space fighter in Star Wars. 😄

The photos of the kit parts show that you really have a lot of work ahead of you.

John Hughes
Not Star Wars, more Flash Gordon by the looks of those sprues!

Neil
Hi Robert, Haha! 'da Putty Party'... Love it!... Following with great interest 🙂

Robert Podkoński
Feel welcomed to the party, Neil - every party needs a DJ 😄

Neil
Thanks Robert. I'm there mate! 🎧🤘🎶

Ben M
Those parts look gloriously terrible

Robert Podkoński
Still, the plastic is workable, Ben. As far as I have checked: it can be filed, filled, and glued... So, there is hope... 😄

Ben M
I looked in the stash and I have a mach2 kit I bought when I was young and foolish.

Robert Podkoński
I have five, not counting this one... Hmm...the testimony of what kind of mental disease it is? Nothwithstanding, only Mach 2 offered models of some exotic planes, like X-24.

gorby
I wish you luck Robert. Your going to need it (and probably a stiff drink or four). 😉
Was the kit mould made from soap? 😄

Robert Podkoński
Thanks for your encouraging words, Gorby! ... It seems probable, taking into account that in some Mach 2 kits the material itself is "soapy"... 😄

Alex K
A French prototype and a Mach 2 kit? Can't miss that... I see I'm late but a seat way back in the gallery must be still available...

Jennifer Franklin
I am taking a seat in the gallery myself.

John Hughes
Jennifer? We thought you were missing in action!

M0rce
Looks interesting 🤔

Robert Podkoński
Feel warmly welcomed, Alex, Jennifer and M0rce! I am glad to have you all aboard. @Alex - I have started this album yesterday, so you're not late 🙂

Greg Baker
I'm in!

Nicolas
I'll take a seat.

Robert Podkoński
Welcome, My Friends!... I was not prepared for such an audience 🙂

Greg Baker
Don't worry, Robert. We brought our own snacks!

Robert Podkoński
Good for you 😄

Gary Victory
That's nasty....! Good luck with your build. Robert. Take your time and enjoy it.

Roland Sachsenhofer
You are a brave man! I will definitely be watching this with great interest - great!

Robert Podkoński
It is great to have you both aboard, Gary and Roland!

Łukasz Gliński
What a party I've been missing, till now. Wishing you lots of perseverance, mate 👍
PS. Are you going to add the Broplan's Languedoc later on? 😄
[img1]

Robert Podkoński
Welcome, Łukasz. I've been waiting for you 🙂 I don't think so - not enough space, time, skills, and I am not sure if the kit is still available
Sud-Est S.E. 161 Languedoc (Broplan MS-146, 1:72)
BTW. On the photo you posted, there is the earlier of Monsieur Leduc's creations - model 010.

Łukasz Gliński
Got one of them from a shop in the Netherlands in unpronounceably named village near Schiphol, not sure they still offer them
Fingers crossed for your Mach2 endeavour 👍

Robert Podkoński
Lucky you! So, perhaps you will assembly the Languedoc...and then we will join your forces, Łukasz? 😉

Michael Kohl
That's gonna be fun to watch. Only bad modellers need good kits. 😉

Łukasz Gliński
Not sure, mine has to be Polish marked 😛 If I ever come to assemble it 😄

Robert Podkoński
I've been waiting for you too, Michael 😉

Finn
Following

Robert Podkoński
Welcome, Finn!

Mirko Römer
Holy...good luck! 🙂

Robert Podkoński
Thanks, Mirko!

Juergen Klinglhuber
HA-- I had done this once (Leduc 021 | Album by jott (1:72)) and....OMG. Therefore I like the head-line of your album and... I done know how to put it: good that you take it with humor 😉

Hanno Kleinecke
Robert - You are a brave man for sure……

Robert Podkoński
Thanks for encouraging me, my friends 🙂

Ludvík Kružík
Robert, you're handling this brilliantly. I wish you continued success with the construction...
... and that your supply of putty and sandpaper lasts. 😄

Robert Podkoński
Thank you, Ludviku... perhaps some substantial amount of thick CA glue as well...

Bruce Huxtable
Liking the internal modifications, very neat fine work. Each part is a kit in itself, with which to aim for perfection.... 🙂 👍

Robert Podkoński
Thanks for your kind words, Bruce...

Juergen Klinglhuber
looking good 👍

Robert Podkoński
Thanks, Juergen 🙂 I will be closing the tube soon...

Dave Flitton
Excellent work on this kit. I hear Mach 2 kits are a huge let down, yet they are the only game around for certain subjects.

Łukasz Gliński
Great progress - this project is as mad as the plane itself 😁👍

Ludvík Kružík
The moldings are really terrible. The last time I saw such a horror was on an old Russian Il-2 in 1:48 scale. Plus the kit lacked any surface detail and the parts didn't fit together at all. I eventually built it, but the result was so bad that I left the plane for my sons to play with.
Compared to the Russian kit, this model is significantly better. Although it is far from finished. It will still need a lot of work, but the current state of the model suggests it can be done.
Fingers crossed. 👍 😉

Rui S
Looking Great, as usual. 👍 I'm in 😎

Guy Rump
Looking good, following. 👍

Bohrmann
Following 👀

Olivier
Let us see...