Nyhetsflöde
UM Military Technics 
RIDERsrtäger denna artikel
HG Cosmic Era Gundam Seed Destiny
GAT-04 Windam O.M.N.I. Mobile Suit Bandai Spirits 1:144
5059227 (232) 2020 Nytt verktyg 2 August, 21:05
Skyhikerlade till ett nytt fotoalbum.
5 bilder
Foke Wulf 190 F-8 (1997 tooling)
1:72
I really have to question if the engineers at Revell now work for Boeing? This canopy doesn't fit together at all and it...
Projekt: Focke-Wulf Fw 190 F-8
8 1 August, 17:22
SkyhikerFor a relatively new kit I am surprised on how much flash and fitting issues this kit has.
2 August, 04:46
SkyhikerIt's really hard for me to fight off the urge to correct the structural issues with this kit. But I promised myself I would make this one out of the box.
2 August, 11:32
Patrick HagelsteinI've seen that promise before Skyhiker! 😂 Good luck keeping this one OOB! 😉👍🏼
2 August, 20:39
Sergio OrdonezMate, I think you should put the windshield uspside down. The ángel does not cope with the real one as I see on photographs.
2 August, 20:52
SkyhikerUnfortunately it looks even worse the other way around. The idiot engineers at Revell should be fired.
2 August, 21:04
Richardäger denna artikel
HMS Battleship
Warspite 1942 wooden deck & paint mask for TRUMPETER 05795 Shipyard Works 1:700
700098 2 August, 21:04
RIDERsrtäger denna artikel
Leopard 2A6 Captured Version with T-80 Wheels in Moscow
Rye Field Model (RFM) 1:35
5114 2024* Nya delar 2 August, 21:03
WasiliHi all,
I'm very very new here, but have been modelling professionally since 1996, including prototyping for kit manufacturers. I see some of my old 1/350 prototypes that were made for one company (from 1998 - 2002, in this case Artitec from Amsterdam, NL) have been reboxed, repopped by a different company (Naval Models) a decade later. The Naval Models kits are on this site, but without the history. The original Artitec kits are not on this site. How do i add that history as a contributor ?
Thx very much for the feedback. If i'm asking this in the wrong spot, pls let me know.
I'm very very new here, but have been modelling professionally since 1996, including prototyping for kit manufacturers. I see some of my old 1/350 prototypes that were made for one company (from 1998 - 2002, in this case Artitec from Amsterdam, NL) have been reboxed, repopped by a different company (Naval Models) a decade later. The Naval Models kits are on this site, but without the history. The original Artitec kits are not on this site. How do i add that history as a contributor ?
Thx very much for the feedback. If i'm asking this in the wrong spot, pls let me know.
1 August, 11:14
Ben MWelcome! I am not an expert at this by any means but I believe you would go into the appropriate naval models kit and click "add based on" to create the corresponding artitec kit. I believe if you post here you will get better help than I can provide: scalemates.com/datasuggestions.php
1 August, 11:46
Spanjaardyou need to add the artitec kits first, and then you can use the "based on" in the Naval kits. any SCM user can add new kits and do the "based on"
1 August, 12:03
WasiliI managed to add my naval frigate kits and add history. Had been looking and searching at the site for many moons. Nice to actually contribute..
2 August, 20:07
Rick Taylorvill ha den här artikeln
Modern US Army THAAD (Terminal High Altitude Area Defence ) (for Trumpeter 01054)
Voyager Model 1:35
PE35950 2018 Nytt verktyg 2 August, 20:59
Mike Klade till ett nytt fotoalbum.
15 9 October 2017, 06:45
Donald Dickson IIVery nice! What colors did you use? I am about to start this one myself.
6 October 2021, 18:58
Mike KSpanjaard....they are made from paper. I drew a row of leaves on a long strip, cut them out, sprayed it green, then rolled it up.
Donald...sorry, this was a few.years ago and I don't remember. Probably just Tamiya blue.
If I had to do it again I'd use a more grey/blue as this blue looks too bright for a corsair in my opinion.
6 October 2021, 19:45
CaptGPFBeautiful bird and Dio setting. This is the third album I've seen on the subject. Do you happen to be a fan of the F4-U1? 😜
1 August, 14:28
Richardmarkerade denna artikel som på beställning
Bismarck Class Metal Barrel and Water Blast bag 380mm and 150mm barrels
Very Fire 1:350
DKM01 20xx Nytt verktyg Multi ämne (3)2 August, 20:56
Rick Taylorvill ha den här artikeln
HEMTT M977, M983 XZL Sagged Wheel Set for Trumpeter, Italeri
Def.Model 1:35
DW35090 2016 Nytt verktyg 2 August, 20:55
Bill Gilmanlade till ett nytt fotoalbum.
72 bilder
Handley Page Victor B.Mk.2(BS) (Airfix)
1:72
And the finished behemoth. A rhapsody in white.
Projekt: Handley Page Victor B.Mk.2(BS)
![1:72 Handley Page Victor B.Mk.2[BS] (Airfix A12008)](/products/img/5/5/1/966551-16559-32-t180.jpg)
2+ 82 12 May 2023, 18:22
Slavo HazuchaTuning in for the show - cockpit already looks fab, incl. the mission-read elements! 👍🏻
14 May 2023, 14:27
Bill GilmanI've uploaded more photos that document the build progress, which has been very slow. Sorry about that, but life keeps getting in the way. I've had a variety of health issues and I'm heading to the oncologist next week to set up a time for a biopsy on some nodes in my neck. Hopefully it's just related to a sinus infection I've been fighting and not the lymphoma coming back. Keeping my fingers crossed. Cheers, Bill
10 February, 20:06
Robert PodkońskiI'll keep my fingers crossed for you too, Bill. Great job on the model btw. Keep it up!
10 February, 22:19
Zbynek HonzikI'm keeping my fingers crossed that everything goes well with your health, Bill. 🍀
10 February, 22:36
NicolasI also keep my fingers crossed that everything will be fine with your health.
11 February, 20:14
Bill GilmanI used up a few bottles of semi-gloss white, but the Victor is now a "white whale." Thanks for the kind words on my health - I go in on Feb. 29 for a sinus surgery and tissue collection for biopsy. Fingers crossed. I tried to cross my toes but was unsuccessful... Cheers, Bill
26 February, 14:47
gorbyHope the biopsy doesn't find anything bad Bill.
The Victor looks excellent so far.
26 February, 15:54
Bill GilmanOh, by the way - after two weeks (!) of testing my oncologist decided the biopsies were negative. Dodged another bullet.
17 June, 14:07
Bill GilmanThanks mates. I've added a couple more photos that show the painting of the landing gear and air brake internals. I've also painted the wheels, gear doors and air brake petals (photos soon). Up next is to paint the dielectric panels on the underside as well as the H2S radome. Cheers, Bill
19 June, 13:34
Bill GilmanTwo more photos added showing some detail painting. I'm off to Rehoboth Beach, Delaware tomorrow for a week of spending what's left of my retirement portfolio. Unfortunately there are no hobby shops anywhere near where we'll be. But the Air Mobility Command museum at Dover AFB should make up for that.
21 June, 11:16
Bill GilmanNearing the finish line on this one. The stickers are all on, and I really like how they performed. Hardly any film outside the design, and they snuggled down nicely with the usual solvents. I didn't see any silvering. Next up will be a few coats of a semi-gloss clear, and then I can attach the remaining bits. It's been a long build, but it was interrupted several times. Next project will be smaller! Cheers, Bill
14 July, 20:13
Thomas KolbThat is an exceptionally clean build and paintjob, I am super impressed with the decals too.
1 August, 14:03
Bill GilmanThanks everyone. It took me more than a year to build it, but I think it was worth it. Now, where to put it? Cheers, Bill
1 August, 18:35
Palo MI also wonder about the same question (where to put it), that's why mine is still in the box 🙂 . Beautifully done, Bill, congrats on such a great result. Please do share once you have an idea for how to show it off permanently 🙂
1 August, 20:02
Bill Gilman@Palo M - I have a display case large enough to hold it, but it's currently full! I've decided to get a smaller enclosed bookcase (like an IKEA Billy with glass doors) and move all my smaller models over to that. That will free up more than enough room. For now though, the Victor is in a large cardboard box awaiting its permanent home. Cheers, Bill
2 August, 12:18
Palo MThanks Bill! May I ask what kind of case it is? I'm familiar with Billy - I instead use an IKEA MILSBO glass vitríne for all of my models. I just can't find a decently priced one for larger models like this Victor, 1:48 F-111 or larger 1:32 planes. If you know the name of the display case, would appreciate the info.
2 August, 19:02
Bill GilmanHi Palo, My big display case is a homemade custom one that I got from a local club member's estate after he passed away. It's really nice, with internal lights and some storage drawers at the bottom. Whoever made it knew his/her woodworking. Oh yeah, it weighs a ton. Cheers, Bill
2 August, 19:13
/sv/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sv
35
35
/sv/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo