Nyhetsflöde

Snake Plissken
Wow, chrome plated!

Ben M
Taking it on vacation with me to get it started.

Nathan Dempsey
Bearcats unite! Following 👀

Guy Rump
Following. 👍

Snake Plissken
Is it similar to a commemorative edition or just meant to replicate natural metal finish?

Ben M
It's aluminum plated to represent the actual nmf finish. I built a t-33 where I had some issues that I hope to improve upon.

Ben M
Did a lot of sanding areas that will be glued, masking, fitting parts to each other, and basic assembly while I'm on vacation. I got new decals from Siam decals as the originals are from 1968 and not in good shape. I'm not sure how old the Siam decals are but they are newer than '68. One thing that is apparent is the stripey tail decal doesn't fit at all. This is going to be a good challenge to resolve.

Robert Podkoński
Taking a seat here.

Ben M
Decided to try to apply the 1960s decal for the cockpit, as I don't have an alternative. Had to soak it for about a minute in hot water to get it to release. As is typical for hawk kits the decal isn't the right size but you go to war with the decals you have. I got it to apply without shattering. Unsure if it will stick, very old decals like this often have to be glued in place.

Neil
Interesting 🤔 following also, looking good 👍

Ben M
I think the Siam Scale decals I'm using instead of the originals are about 20 years old but they're going on ok. A little thick, so not settling down into panel lines but I'll try some decal fluid once they set in place, hopefully they will on the aluminum surface! The roundels are two part so I will have to do a second layer…

Mr D
Smart little model.... unusual in the factory chrome 👍👍
Nice classic kit.
Bit of heat of hairdryer works with thick decals.... nice n steady.
Like it 😁👍

Ben M
That's a good idea, I may give it a try. First I'm going to upgrade from micro sol to mark fit.

Mr D
I use Mark fit ....but recently found the Vallejo one works amazing... Just used it on my in progress IAR-80.
Definitely my go to now.
The moon ships is great 👍👍

Nathan Dempsey
Wow Ben this one is turning into a colorful bird.

Ben M
An interesting detail I note while decaling. The panel lines on the fuselage are engraved. The panel lines on the wings are raised. Wtf.

Desert Marlin
I've been using Mr. Mark Softener and Mr. Mark Setter. They worked well on some Kitty Hawk decals which are pretty stubborn...

gorby
Nice work so far.

Ben M
The tamiya mark fit and some work with a needle solved the problems! Thanks for all the great ideas everyone. Onwards!

Ben M
Did a bunch of cut the decals into pieces to fit a different model than they were made for. Came out fairly well. Subassemblies are getting larger as the project comes together.

Dave
Looks great. Nice work

Desert Marlin
You seem to have forced the decals to cooperate!

Robert Podkoński
Great job, Ben!

Mr D
It's looking really good 👍
It's great that the kits can still be built after all these years.
The people in the factory's would have never believed the model they are packing wouldn't be built until 2024 🤔🤣.
Nice build to follow 😃

Ben M
Almost complete. Popped the main fuselage seam a bit 🙁 I had gone to a lot of work to hide it. For some reason even after carefully scraping the mating surfaces I just don't get good adhesion. Maybe next time I will try only using CA for assembly on my next plated kit.

Ben M
The decal sheet says 23rd squadron Kohkratiem AFB, but there's not much on the internets. Possibly a misspelling? The Royal Thai Air Force had F8F's from 1951 to 1963.

Thanks to Siam Scale for the decals, without which this project would be hopeless. The sheet number is 48003 if that helps anyone.

Desert Marlin
Looks great so far! Don't worry about the seam. It can be filled and perhaps painted, even though it's plated.

Desert Marlin
Or foil added if you have access to that...

Ben M
Complete! @desert marlin - I decided the seam on the bottom wasn't important enough to do a bunch of rework. It's an old 60's "chrome" plated model after all 🙂 I think it came out looking pretty good overall.

Mr D
Fantastic, Really nice kit , Looks 👍 great.
Sometimes it's nice for a vintage kit to look close to how it would be built originally.... Nostalgic.
Nice find....

Guy Rump
Great job! 👍

Nathan Dempsey
That's some nice work on that old kit Ben. Looks great!

Alberto
Nice to see the old kits coming out to life!

Dave Flitton
Excellent build. Nice reference when I finally build mine.

Cuajete
An old kit with a good work... Following!

Ben M
I enjoy kits that don't fit! 👀

Maciej Bellos
That's some work there! Looking forward to the next steps.

Nicolas
👀

Alec K
Taking a seat. Nice progress 👍

B. M.
Very nice so far! 👍🏼
What did you use to fill up these gaps?

Cuajete
Well done so far 👍

Dave Flitton
Watching!

DerMattes
Following 👍

Cristian A
Welcome my friend 👍

Sergej I
following 👍

Cuajete
Me 3!

Łukasz Gliński
Me 4, will follow before this kit makes it into my stash 🙂

Cristian A
Welcome Sergej. Cuajete and Lukasz!

The kit is very nice and I love the decals, they show exactly the 43 blue in my photo posted here. So far I've found a small fitting issue to the front, but if you start slowly and work your way towards the wings it gets into place.

Oliver
Oh, I take a Seat

Guy Rump
Following as well! 👍

Łukasz Gliński
These colours look great indeed 👍

Cuajete
I agree with Łukasz 👍

★ Starfish ★
Incredible! Also thank you for those reference photos!

Cristian A
Absolute pleasure to have you here, thank you Mike_AUT

Robin (WhiteGlint)
Great looking engines! Your diorama is also shaping up nicely.
The little patch of green really breaks up all the dark colours from the aircraft and the apron as well. 👀 👍

Cristian A
Thank you Robin! Glad you like it! I also think the green patch adds a nice contrast to balance out all those darker tones 👍 😊 it took me one week to mask and paint the engines, now they are barely visible between
the vertical stabilizers 😄

Dave Flitton
Watching

Oleg Bogolei
Very interesting. I`ll take a sit.

Robert Podkoński
Me 2!

Nicolas
Me 3

Dave Flitton
Watching

Tcamp
Texas hurricane is underway let the fun begin!
Sorry for inverted pics cant get rotated🤠

Ben M
Rotation is well hidden. To rotate your photos, open your album. Click on "manage". Then turn on the "advanced options" toggle. You will now have the ability to rotate photos in the album.

Tcamp
Thanks ben
That was driving me nuts!!!!
Appreciate that brother!

Ben M
Glad I could help, mate! Looks like a fun build.

Tcamp
So far so good just a cat 1 now hopefully ill turn her into a cat 5 (LOL)

Tcamp
I reworked the main jib boom
I wasnt feeling the kit one
Its still a work in progress

Doubtingmango
Beautiful work!

Tcamp
Thank yall
Im not a rivet counter or anything but.....
The more i looked at the kit boom i could not figure how it would work ..
Revell had their boom right im also going to support mine as they did and use poles instead of ratlines. Which tie down inside of the work area ?
Im not feeling that one either lol
Again thanks

M0rce
Oooohhh... so nice 🙂
A Lindberg kit? Seen them but never got one, yet. That looks amazing.

M0rce
The details on this kit are so crisp. Looking forward to seeing what you're doing to the rear section.

Tcamp
Me too. ( LOL )
thanks m0rce

Lochsa River
Great work....

David Taylor
Watching.

Tcamp
Thank you lochsa river
And david taylor

gorby
Very nice work.

Tcamp
Thank you gorby
I have some lines to hank and a bit more weathering

Kyriakos Vafiadis
Finished painting this Monogram's F-16 XL

Dave Flitton
Ant pictures? Any changes to the model?