Nyhetsflöde
Darren Creed
äger denna artikel
äger denna artikel
Commonwealth CAC CA-11 Woomera Prototype Attack Bomber
Croco Models 1:72
CMD-SKY7201 2023 Nytt verktyg 2 August, 03:56
Darren Creed
äger denna artikel
äger denna artikel
usefull for Dutch Navy MLD version
Dornier Do24K conversion setBlackbird Models 1:72
BMA72053 2019 Nytt verktyg 2 August, 03:55
Kyle DeHart
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
10 21 January, 18:49
Kyle DeHart
Thanks guys. Frank, even when I get confused by the wings I always have something with 4 wheels hangin around too.
Thanks guys. Frank, even when I get confused by the wings I always have something with 4 wheels hangin around too.
21 January, 21:18
Kyle DeHart
I have been working on things. Just busy outside of the hobby and struggling for bench/internet time.
I have been working on things. Just busy outside of the hobby and struggling for bench/internet time.
1 April, 06:24
Kyle DeHart
Ah, I love gassers. They're so much fun! You can do anything at all to them. But I understand the high stance isn't for everyone. Thank you!!
Ah, I love gassers. They're so much fun! You can do anything at all to them. But I understand the high stance isn't for everyone. Thank you!!
1 April, 09:05
Bozzer
Crazy looking chassis! Nice work mate!
Oddly enough, I was thinking about you, yesterday?
PM bound.
Crazy looking chassis! Nice work mate!
Oddly enough, I was thinking about you, yesterday?
PM bound.
2 April, 21:12
Kyle DeHart
This one is done. I am not going to fight it anymore. Lol. This isn't an easy kit by any stretch. Not for beginners. I broke the flip nose mechanism and had to build my own. Think I ended up slightly further forward than I should've but it was a good learning experience. The decals broke into many pieces but I wanted to use them so I attempted to piece them back together. Not a great build by any stretch but it was fun.
This one is done. I am not going to fight it anymore. Lol. This isn't an easy kit by any stretch. Not for beginners. I broke the flip nose mechanism and had to build my own. Think I ended up slightly further forward than I should've but it was a good learning experience. The decals broke into many pieces but I wanted to use them so I attempted to piece them back together. Not a great build by any stretch but it was fun.
1 August, 21:24
Darren Creed
äger denna artikel
äger denna artikel
Gloster Meteor U.MK 16/U.MK 21 Conversion
Red Roo Models 1:72
72-128 2 August, 03:54
Jorge Kwek
vill ha den här artikeln
vill ha den här artikeln
Loyalty “G” Assist Humanoid Soldier Remnant Dome Series Red version
Warriors Workshop 武士工坊 1:30
2024 Nya delar 2 August, 03:47
SpeedySapper
startade den här artikeln
startade den här artikeln
Sd.Kfz.222
Leichter Panzerspähwagen (4x4) includes photo-etched parts & aluminium gun barrel Tamiya 1:35
35270 (35270•2500) 2003 Nya delar 2 August, 03:44
Joseph Russo
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
25 15 April, 14:26
gorby
Don't get to see many 1/16 kits built so I'll take my seat and follow your build.
Don't get to see many 1/16 kits built so I'll take my seat and follow your build.
15 April, 14:47
Bozzer
I'll jump in too. I've been watching the 1/16 deluge of armour kits, hitting the market, and it's tickling my juices. Granted, the prices are high, but the details are fabulous and my old eyes, can actually see the parts, and my fat fingers can place them too!
Strapping in for a back seat.
I'll jump in too. I've been watching the 1/16 deluge of armour kits, hitting the market, and it's tickling my juices. Granted, the prices are high, but the details are fabulous and my old eyes, can actually see the parts, and my fat fingers can place them too!
Strapping in for a back seat.
15 April, 16:16
Bozzer
The details on that engine, are excellent! I've done the Hasagawa 1/25 version, and that was impressive, but this is on another level 👍
The details on that engine, are excellent! I've done the Hasagawa 1/25 version, and that was impressive, but this is on another level 👍
23 April, 16:21
Robert Podkoński
Looks great already! (Perhaps you will find some inspiration for weathering here: It is a men's world... (Moto Weteran Bazar) | Album by podkon )
Looks great already! (Perhaps you will find some inspiration for weathering here: It is a men's world... (Moto Weteran Bazar) | Album by podkon )
12 May, 07:57
Joseph Russo
Thank you Robert and I much appreciate the link. I think it is a great reference.
Thank you Robert and I much appreciate the link. I think it is a great reference.
12 May, 15:27
Joseph Russo
Small details added, 50 cal M2 and overall weathering. Will add some stowage and perhaps the figure included in the kit (depends on my limited figure painting ability)
Small details added, 50 cal M2 and overall weathering. Will add some stowage and perhaps the figure included in the kit (depends on my limited figure painting ability)
19 May, 01:27
Joseph Russo
Replaced the 50 Cal with a 30 cal and stowage finish the build. Very happy building at this scale
Replaced the 50 Cal with a 30 cal and stowage finish the build. Very happy building at this scale
26 May, 15:16
santa fe tanker
Super cool job, I'm going to do the workable steering and then going to prime, struggling because been 50 years since doing this so 1/16 is bueno. thanks for sharing
Super cool job, I'm going to do the workable steering and then going to prime, struggling because been 50 years since doing this so 1/16 is bueno. thanks for sharing
1 August, 23:40
Joseph Russo
Thanks Santa Fe I enjoyed the larger scale as well, read a review that the plastic parts for the steering were not up to the strain as working parts I hope it works out for you. Thank as well Lost, I liked beating it up bit.
Thanks Santa Fe I enjoyed the larger scale as well, read a review that the plastic parts for the steering were not up to the strain as working parts I hope it works out for you. Thank as well Lost, I liked beating it up bit.
2 August, 01:42
Jorge Kwek
vill ha den här artikeln
vill ha den här artikeln
Loyalty “G” Assist Humanoid Soldier Remnant Dome Series Green version
Warriors Workshop 武士工坊 1:30
2024 Nya delar 2 August, 03:32
Jorge Kwek
vill ha den här artikeln
vill ha den här artikeln
Loyalty “G” Assist Humanoid Soldier Remnant Dome Series Brown version
Warriors Workshop 武士工坊 1:30
2024 Nya delar 2 August, 03:25
Duster_d
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
10 bilder
Spitfire Mk.Vb (HobbyBoss)Ny: 2 August, 03:24 1:72
It remains to finish a few minor details.
Projekt: Spitfire Mk.Vb (HobbyBoss)
8 22 July, 16:19
komoras
HobbyBoss painting schemes are suggestive at best, so to say...
Having them suggesting RLM66 on Luftwaffe camouflage, where the RLM75 should go...it's enough for me to look elsewhere.
Go with the other sources on the internet, I would suggest looking up more multiple sources.
And as far my RAF knowledge goes, after the Battle of Britain this camo combo was not used anymore, but I might be wrong.
PS. "Oark earth" shoudl say enoguh... 😄
HobbyBoss painting schemes are suggestive at best, so to say...
Having them suggesting RLM66 on Luftwaffe camouflage, where the RLM75 should go...it's enough for me to look elsewhere.
Go with the other sources on the internet, I would suggest looking up more multiple sources.
And as far my RAF knowledge goes, after the Battle of Britain this camo combo was not used anymore, but I might be wrong.
PS. "Oark earth" shoudl say enoguh... 😄
22 July, 16:51
Duster_d
Komoras, I can assume that they (HB) were guided by this: airliners.net/photo/..9-Spitfire/0843874/L
Komoras, I can assume that they (HB) were guided by this: airliners.net/photo/..9-Spitfire/0843874/L
22 July, 17:16
komoras
soyuyo.main.jp/spit5b/spit5be-1.html
I think this one sums it up best 🙂
Both is correct, depends only which one you want to represent - pre-august 1941 or post-august 1941.
(Thus concluding, my BoB related comment is wrong) 🙂
soyuyo.main.jp/spit5b/spit5be-1.html
I think this one sums it up best 🙂
Both is correct, depends only which one you want to represent - pre-august 1941 or post-august 1941.
(Thus concluding, my BoB related comment is wrong) 🙂
22 July, 17:33
Łukasz Gliński
Interesting, couldn't find any trace of DE/DG on Polish Mk Vs.
I know of Mk Is and IIs being repainted in Polish squadrons, but I'd assume this one has been repainted into DG/DG before being delivered to the 317th.
Still, there's no proof.
Very cool to see you added the undercarriage covers, what a silly mistake by HB 😄
Interesting, couldn't find any trace of DE/DG on Polish Mk Vs.
I know of Mk Is and IIs being repainted in Polish squadrons, but I'd assume this one has been repainted into DG/DG before being delivered to the 317th.
Still, there's no proof.
Very cool to see you added the undercarriage covers, what a silly mistake by HB 😄
29 July, 20:25
Duster_d
Łukasz, I was guided by these photos. If the guys from Duxford had painted a real Spitfire like that, then why can't I paint a model in such a scheme? 🙂
airliners.net/photo/..tfire-LF5B/7392151/L
Łukasz, I was guided by these photos. If the guys from Duxford had painted a real Spitfire like that, then why can't I paint a model in such a scheme? 🙂
airliners.net/photo/..tfire-LF5B/7392151/L
30 July, 02:19
Hans-Jürgen Haag
Looks good so far! The boxes under the Wings could be the cameraports for the later PR variants with no big gunns.
I would cut it.
Looks good so far! The boxes under the Wings could be the cameraports for the later PR variants with no big gunns.
I would cut it.
31 July, 07:15
Łukasz Gliński
Agree w/Hans-Jürgen - checked my 3 completed Spitfires (Mk I & V by Airfix and old KP Mk IX) and none of them sports such a feature
Agree w/Hans-Jürgen - checked my 3 completed Spitfires (Mk I & V by Airfix and old KP Mk IX) and none of them sports such a feature
31 July, 08:36
Duster_d
Guys, it looks like these are retractable landing lights after all. They were installed until 1942.
I have no idea why HB made them in the lower position. 🙂
[img1]
[img2]
Guys, it looks like these are retractable landing lights after all. They were installed until 1942.
I have no idea why HB made them in the lower position. 🙂
[img1]
[img2]
31 July, 13:27
Duster_d
Łukasz, it seems that only Chinese manufacturers have paid attention to this feature in early (Mk.V and older) Spitfires. 🙂
Łukasz, it seems that only Chinese manufacturers have paid attention to this feature in early (Mk.V and older) Spitfires. 🙂
31 July, 14:44
Mr D
It's a nice tidy job and correct, there were many paint finishes on them.
HB are great little kits for the money, but have few shortcomings.
Always good to do bit of research before n around a build...it's interesting n helps with accuracy.
Top job 👍👍👍
It's a nice tidy job and correct, there were many paint finishes on them.
HB are great little kits for the money, but have few shortcomings.
Always good to do bit of research before n around a build...it's interesting n helps with accuracy.
Top job 👍👍👍
1 August, 17:54
Duster_d
Mr D, yes, exactly. In the process of building, you constantly learn something new, and that's what attracts me to this hobby. What isn't always visible in drawings or 3D models can be discovered when assembling a kit. Each assembled kit teaches me something new about its real prototype, and it's so exciting!
Mr D, yes, exactly. In the process of building, you constantly learn something new, and that's what attracts me to this hobby. What isn't always visible in drawings or 3D models can be discovered when assembling a kit. Each assembled kit teaches me something new about its real prototype, and it's so exciting!
1 August, 18:18
AndrewG
äger denna artikel
äger denna artikel
Akagi Bridge W/Flight Deck and Nakajima B5N2 Kate Combo
Border Model 1:35
BSF-001 2023 Modelluppsättning Multi ämne (2)2 August, 03:18
Jerry DeLuyck
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
2 1 July, 00:01
Danumurthi Mahendra
Spotless! Shock how beautiful it turned out compared to the WIP images
Spotless! Shock how beautiful it turned out compared to the WIP images
2 August, 03:16
Dieter Bihlmaier
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
28 19 September 2021, 14:35
Sebastian Meyner
Beautiful work Dieter 👍 What is the base kit and the scale? ....more pictures please! 😉
Beautiful work Dieter 👍 What is the base kit and the scale? ....more pictures please! 😉
19 September 2021, 15:04
Dieter Bihlmaier
Hi Sebastian, it's the Hasegawa 109 in 32nd scale. I found a description in a JAPO monograph. Pure what if...I guess.
Hi Sebastian, it's the Hasegawa 109 in 32nd scale. I found a description in a JAPO monograph. Pure what if...I guess.
19 September 2021, 17:24
Sebastian Meyner
Thank you for the pictures and explanation! Very convincing result Dieter! I especially like the "new" oil cooler housing (gives it a very different look) and that you actually thought of the bigger supercharger inlet for the DB605L! Highest marks from me 👍
I assume you used the gunpods from the kit as base for the underwing gun fairings?!
Thank you for the pictures and explanation! Very convincing result Dieter! I especially like the "new" oil cooler housing (gives it a very different look) and that you actually thought of the bigger supercharger inlet for the DB605L! Highest marks from me 👍
I assume you used the gunpods from the kit as base for the underwing gun fairings?!
19 September 2021, 18:20
Iain Ogilvie
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
15 31 July, 11:25
Iain Ogilvie
Thanks for your interest gorby and bughunter!
These are some quick images I grabbed on Sunday - will get some better ones and post here.
Part 'traditional' sheet styrene (with a balsa wood core for the wings) and part CAD designed and printed parts for the details, such as engine, exhausts, undercarriage, cockpit details.
Built for a former owner of the full-size aeroplane.
Thanks for your interest gorby and bughunter!
These are some quick images I grabbed on Sunday - will get some better ones and post here.
Part 'traditional' sheet styrene (with a balsa wood core for the wings) and part CAD designed and printed parts for the details, such as engine, exhausts, undercarriage, cockpit details.
Built for a former owner of the full-size aeroplane.
31 July, 12:44
Michael Kohl
Those teasers you threw at us wet the appetite for more. I fully second Bughunters request.
Those teasers you threw at us wet the appetite for more. I fully second Bughunters request.
31 July, 13:14
Iain Ogilvie
Hi Dieter - I would have to borrow it back from the person I built it for - so will possibly be at Telford, but not sure at this stage.
Hi Dieter - I would have to borrow it back from the person I built it for - so will possibly be at Telford, but not sure at this stage.
31 July, 15:29
Bernhard Schrock
That's „true" modeling! Great result & execution. Chapeau! Could you add some WIP pictures please?
That's „true" modeling! Great result & execution. Chapeau! Could you add some WIP pictures please?
31 July, 15:45
Iain Ogilvie
Thanks for your kind words Bernhard and Robert - appreciated!
I've just uploaded some 'in-progress' images - I may have more which I'll add if I find them.
I'll be taking some studio shots in next few days.
Thanks for your kind words Bernhard and Robert - appreciated!
I've just uploaded some 'in-progress' images - I may have more which I'll add if I find them.
I'll be taking some studio shots in next few days.
31 July, 18:01
Danumurthi Mahendra
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
50 20 May 2021, 01:44
Ali Yulianto
Fantastic work in bringing this old kit back to life. Salut Mas Monty! 👍 👍
Fantastic work in bringing this old kit back to life. Salut Mas Monty! 👍 👍
20 May 2021, 05:03
Julian Herrero aka Yuri
Great work ,,,pls can you show us a picture of your customiswd olfa cutter ?
Great work ,,,pls can you show us a picture of your customiswd olfa cutter ?
25 June 2021, 05:10
Danumurthi Mahendra
Hi @Julian I added 2 images of the customized OLFA cutter. In essence, I relocated the blade outside its original location and secure it with tape. To ensure that the needle and blade is firm and do not move, I inserted wire insulator material.
Hi @Julian I added 2 images of the customized OLFA cutter. In essence, I relocated the blade outside its original location and secure it with tape. To ensure that the needle and blade is firm and do not move, I inserted wire insulator material.
25 June 2021, 07:11
Julian Herrero aka Yuri
oh ,,, I see ,,, what a simple and clever idea ,,, Thanks for sharing
oh ,,, I see ,,, what a simple and clever idea ,,, Thanks for sharing
25 June 2021, 16:14
Danumurthi Mahendra
Thank you @Julian. I made a few trials. once I am confident that the blade is not moving, I could make 2mm diameter circles easily. glad it was helpful
Thank you @Julian. I made a few trials. once I am confident that the blade is not moving, I could make 2mm diameter circles easily. glad it was helpful
25 June 2021, 17:05
Danumurthi Mahendra
This video summarizes in 6 min my struggle with this ancient kit Youtube Video
This video summarizes in 6 min my struggle with this ancient kit Youtube Video
2 August, 03:10
Stephen G
I'm very sceptical Trumpeter will be able to match the Takom/Meng kits, let alone improve on them. I guess if you're desperate to make an -A version...
I'm very sceptical Trumpeter will be able to match the Takom/Meng kits, let alone improve on them. I guess if you're desperate to make an -A version...
1 24 June, 11:55
Van Lee
Probably not. But it looks like it is going to be a lot less money also, in the mid 50s money. So if you are wanting a new mold Apache to replace the old Revell mold or Kangnam mold but don't want to pay Meng/Takom prices, this would probably be a welcome addition. Most people seem pretty positive towards Trumpeter aircraft.
Probably not. But it looks like it is going to be a lot less money also, in the mid 50s money. So if you are wanting a new mold Apache to replace the old Revell mold or Kangnam mold but don't want to pay Meng/Takom prices, this would probably be a welcome addition. Most people seem pretty positive towards Trumpeter aircraft.
2 August, 03:04
Roger Trewenack
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
3 bilder
Eaglemoss BTTF De LoreanNy: 2 August, 02:50 1:8
Completed 001 after part clean-up
Projekt: BTTF De Lorean
2 August, 02:50
/sv/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sv
35
35
/sv/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo