Nyhetsflöde
Phenix Outis
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
This album no longer exists
4 bilder
MyAlbumThis album does not contain any images.
1:48
Projekt: V2 (A4) Mauve
12 October, 08:21
Kesa Tiho
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
16 bilder
Leopard at the berlin wallNy: 11 October, 22:30 1:35
Finally got the entire thing done, my first actual diorama, some more weathering could be applied and some wash to the g...
Projekt: West german tank at the Berlin wall
9 7 October, 12:20
Michael Kohl
Hi Kesa,
a Leo 1 at the Berlin Wall is a nice idea and I am curious about the connection your family has to this idea.
I don't wanna spoil the project and I may stand corrected, but to the best if my knowledge there were never any German tanks in Berlin between the end of the second world war and the german reunification. The tanks were American, russian, british and french.
Hi Kesa,
a Leo 1 at the Berlin Wall is a nice idea and I am curious about the connection your family has to this idea.
I don't wanna spoil the project and I may stand corrected, but to the best if my knowledge there were never any German tanks in Berlin between the end of the second world war and the german reunification. The tanks were American, russian, british and french.
7 October, 12:49
Kesa Tiho
The project and my family are completely unconnected just wanted to mention it.
I am aware that there werent any german tanks in berlin but i just found this leo for a cheap price and decided why not, i also dont think there were JGSDF iraq assistance teams in berlin at the time but the fun thing about this hobby is that i can do whatever i want so again decided it would add a nice touch to the dio
The project and my family are completely unconnected just wanted to mention it.
I am aware that there werent any german tanks in berlin but i just found this leo for a cheap price and decided why not, i also dont think there were JGSDF iraq assistance teams in berlin at the time but the fun thing about this hobby is that i can do whatever i want so again decided it would add a nice touch to the dio
7 October, 13:21
gorby
Nice work Kesa, it is your best so far. The tools on the tank are particularly well painted.
Nice work Kesa, it is your best so far. The tools on the tank are particularly well painted.
11 October, 07:14
Kesa Tiho
Thanks gorby, though usually my detail painting takes the builds down a notch. Im glad it didnt seem to happen this time 🙂
Thanks gorby, though usually my detail painting takes the builds down a notch. Im glad it didnt seem to happen this time 🙂
11 October, 11:09
Martin Oostrom
Take it slow young one. Your skills will get better with each build. Build, build and build. One day you'll outclass Master Gorby
Take it slow young one. Your skills will get better with each build. Build, build and build. One day you'll outclass Master Gorby
11 October, 17:23
Kesa Tiho
I am taking it slowly, sire. If i ever do surpass master Gorby then it will take years, decades, millenniums maybe.
I am taking it slowly, sire. If i ever do surpass master Gorby then it will take years, decades, millenniums maybe.
11 October, 17:35
gorby
"Master" me? There are many, many more on here with infinitely more skill.
If you stick with modelling Kesa you'll surpass me in a couple of years easily judging by your recent progress.
Well done on your diorama, it looks good. 👍
"Master" me? There are many, many more on here with infinitely more skill.
If you stick with modelling Kesa you'll surpass me in a couple of years easily judging by your recent progress.
Well done on your diorama, it looks good. 👍
12 October, 06:56
Kesa Tiho
Well you are like a master in my eyes, just look at your builds. Your entire wall is a minefield of 10/10 builds man. Sure with everything theres someone better but i feel like with this hobby you are either better at painting (aka weathering, painting, paint detail) or glueing (how clean the build looks before painting, how strong the build is) , for example mr.james is better at painting than you and Steven van dyck is better at glueing than you but to this day i havent seen anyone do both better than you.
And thanks, i have been getting better at this, if my 6 year old self could see what ive made now hed probably be very mildly impressed
Well you are like a master in my eyes, just look at your builds. Your entire wall is a minefield of 10/10 builds man. Sure with everything theres someone better but i feel like with this hobby you are either better at painting (aka weathering, painting, paint detail) or glueing (how clean the build looks before painting, how strong the build is) , for example mr.james is better at painting than you and Steven van dyck is better at glueing than you but to this day i havent seen anyone do both better than you.
And thanks, i have been getting better at this, if my 6 year old self could see what ive made now hed probably be very mildly impressed
12 October, 08:08
gorby
Nice of you to say Kesa, but when I look on Scalemates I'm constantly astounded by models I could hope to equal.
Nice of you to say Kesa, but when I look on Scalemates I'm constantly astounded by models I could hope to equal.
12 October, 08:20
Phil Mead
äger denna artikel
äger denna artikel
Sd.Kfz.181 Tiger I Initial Production No.121 SpzAbt. 502 Leningrad 1943
Rye Field Model (RFM) 1:35
RM-5078 (RFM5078) 2022 Nya delar 12 October, 08:19
Michael Kohl
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
46 bilder
Japanese Phantom F-4EJ KaiNy: 12 October, 08:16 1:72
I am a great fan of color modulation to avoid monotony and a toy like look particular at monochromatic models. Let's see...
Projekt: Japanese Phantom F-4EJ Kai
12 10 October, 15:41
Michael Kohl
Hi Ben. The engravings of this kit are so delicate that they loose depth with the application of primer to such an extent that panellining becomes quite tricky. I would continue to prime models where this doesn't seem to be an issue but modern airliners or small scale models with such fine engravings I will try to do without. I suppose propper surface preparation and use of colors with more 'bite' than acrylics would be a good idea to avoid issues with paint adhesion.
Hi Ben. The engravings of this kit are so delicate that they loose depth with the application of primer to such an extent that panellining becomes quite tricky. I would continue to prime models where this doesn't seem to be an issue but modern airliners or small scale models with such fine engravings I will try to do without. I suppose propper surface preparation and use of colors with more 'bite' than acrylics would be a good idea to avoid issues with paint adhesion.
12 October, 07:34
Carbine1959
slutförde denna artikel
slutförde denna artikel
British
25Pdr.Field Gun & Quad Gun Tractor Canadian Ford F.G.TTamiya 1:35
MM144 (44) 1974 Modelluppsättning Multi ämne (2)12 October, 08:12
Andy Glessner@TaigaWutz
Hallo, haben sie noch die Ketten zu verkaufen?
Danke
Andy
Hallo, haben sie noch die Ketten zu verkaufen?
Danke
Andy
2 October, 12:42
TaigaWutz
Hallo Andy, zunächst sorry für meine späte Antwort. Ich war bis heute im Urlaub. Die Kette ist noch in meinem Besitz und auch zu verkaufen.
Viele Grüße
Peter
Hallo Andy, zunächst sorry für meine späte Antwort. Ich war bis heute im Urlaub. Die Kette ist noch in meinem Besitz und auch zu verkaufen.
Viele Grüße
Peter
6 October, 18:29
Andy Glessner
Hi Peter,
kein Problem, Urlaub muss sein🙂
Wieviel für die Kette mit Versand? Kann ich per PayPal bezahlen?
Danke
Andy
Hi Peter,
kein Problem, Urlaub muss sein🙂
Wieviel für die Kette mit Versand? Kann ich per PayPal bezahlen?
Danke
Andy
7 October, 08:28
TaigaWutz
Hallo Andy, als Päckchen 4€ Versand, als versichertes Paket 5,50€ Versand. Also 26€ oder 27,50€ insgesamt. Meine PayPal Adresse lautet petermischke2209@gmail.com.
Viele Grüße aus Duisburg
Peter
Falls Du in 2 Wochen bei der SMC in Veldhoven bist, kann ich die Kette auch dort an dich übergeben,da ich dort ausstelle. Das würde Versandkosten sparen.
Hallo Andy, als Päckchen 4€ Versand, als versichertes Paket 5,50€ Versand. Also 26€ oder 27,50€ insgesamt. Meine PayPal Adresse lautet petermischke2209@gmail.com.
Viele Grüße aus Duisburg
Peter
Falls Du in 2 Wochen bei der SMC in Veldhoven bist, kann ich die Kette auch dort an dich übergeben,da ich dort ausstelle. Das würde Versandkosten sparen.
7 October, 10:16
Andy Glessner
Hi Peter,
ich nehme die 27,50 €, überweise ich als Freund, dann hast du keine Händlergebühren.
Meine Adresse ist
Andy Glessner
Kiesstrasse 20
61197 Florstadt
Andy
Hi Peter,
ich nehme die 27,50 €, überweise ich als Freund, dann hast du keine Händlergebühren.
Meine Adresse ist
Andy Glessner
Kiesstrasse 20
61197 Florstadt
Andy
7 October, 13:31
TaigaWutz
hallo Andy, alles klar. Das Paket geht morgen zur Post. ich werde die Sendungsnummer danach mitteilen.
hallo Andy, alles klar. Das Paket geht morgen zur Post. ich werde die Sendungsnummer danach mitteilen.
8 October, 06:23
TaigaWutz
Sorry, die Sendungsnummer lautet 358338788963. Sollte bereits heute ankommen.
Sorry, die Sendungsnummer lautet 358338788963. Sollte bereits heute ankommen.
11 October, 08:03
Ondra Koukal
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
20 bilder
B1 Centauro AFV Early Version, Trumpeter, 1:35Ny: 12 October, 08:04 1:35
Projekt: B1 Centauro AFV Early Version
5 7 October, 09:14
T. Vuori
slutförde denna artikel
slutförde denna artikel
Little Armory / Strike Witches: Road to Berlin
Flieger HammerTomytec 1:12
LASW08 (328919) 2024 Nytt verktyg 12 October, 08:03
TH SCALE MODELS (Thomas Haberl)
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
15 15 September, 15:09
Michael Kohl
I really wish that they release that beast in 1:72. Until then I follow the bigger ones. Looking at your first pictures I am sure this will be fun.
I really wish that they release that beast in 1:72. Until then I follow the bigger ones. Looking at your first pictures I am sure this will be fun.
11 October, 19:07
TH SCALE MODELS (Thomas Haberl)
Welcome @Zsolt and DuperScale and thanks for your interest in this build. I was able to finish first step of cockpit section. 3D printed seats fit well into tracks even of they are designed to be glued on the plastic. I used Eduard PE tracks. Dashboard also made with PE. PE seat belts were planned but I felt they are too flat so I ordered Kelik 3D decals - they are better in my opinion.
Welcome @Zsolt and DuperScale and thanks for your interest in this build. I was able to finish first step of cockpit section. 3D printed seats fit well into tracks even of they are designed to be glued on the plastic. I used Eduard PE tracks. Dashboard also made with PE. PE seat belts were planned but I felt they are too flat so I ordered Kelik 3D decals - they are better in my opinion.
11 October, 19:08
TH SCALE MODELS (Thomas Haberl)
@Michael: nice to see you here and glad you have fun 🤩 ICM plans to release the 1/72 in 2025 as far as I know and I have a good idea for a nice diorama. But definitely have to do this in 1/72 ... that thing is really big ...
@Michael: nice to see you here and glad you have fun 🤩 ICM plans to release the 1/72 in 2025 as far as I know and I have a good idea for a nice diorama. But definitely have to do this in 1/72 ... that thing is really big ...
11 October, 19:11
Michael Kohl
Oh. Didn't know that. Those are good news.
You might be aware of two CH-54-builds in 1:72 based on the ol Revell kit which are absolutely stunning (with fire fighting equipment).
But now it's your stage. Cockpit looks very nice.
Oh. Didn't know that. Those are good news.
You might be aware of two CH-54-builds in 1:72 based on the ol Revell kit which are absolutely stunning (with fire fighting equipment).
But now it's your stage. Cockpit looks very nice.
11 October, 19:28
TH SCALE MODELS (Thomas Haberl)
I think I know at least one of them 😝 . This build is supposed to be the military version operated in Vietnam - no extras except the tons of aftermarket I´m going to use
I think I know at least one of them 😝 . This build is supposed to be the military version operated in Vietnam - no extras except the tons of aftermarket I´m going to use
12 October, 07:03
Bernhard Schrock
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
152 30 March, 15:44
Bernhard Schrock
You are welcome. As usual a lot of first rows free! Popcorn for all! 🙂
You are welcome. As usual a lot of first rows free! Popcorn for all! 🙂
3 April, 05:00
bughunter
What a combination: a great new kit, nice accessories and finally a master modeller at the tools - EPIC !
What a combination: a great new kit, nice accessories and finally a master modeller at the tools - EPIC !
10 April, 16:20
Bernhard Schrock
Thank you JAM-SCREW.
Btw: just I saw you actual portfolio of sets for the Seaking! SCM Brand: JAM-SCREW
Absolutely remarkable!! I'm looking forward especially for the landing gear and main rotor hub. 🙂
Thank you JAM-SCREW.
Btw: just I saw you actual portfolio of sets for the Seaking! SCM Brand: JAM-SCREW
Absolutely remarkable!! I'm looking forward especially for the landing gear and main rotor hub. 🙂
12 April, 05:52
Hanno Kleinecke
Just look at that winchframe !!! There is absolutely no doubt that after plugging these plugs the winch will be working. As with all your builds, for the watchers the path is the destination.
Wonderful wip pics - keep'em coming…… 🙂 👍
Just look at that winchframe !!! There is absolutely no doubt that after plugging these plugs the winch will be working. As with all your builds, for the watchers the path is the destination.
Wonderful wip pics - keep'em coming…… 🙂 👍
18 April, 05:02
JAM-SCREW
Rapid progress sir! Very impressive attention to even very fine details for accuracy. Thank you for the updates and images.
Rapid progress sir! Very impressive attention to even very fine details for accuracy. Thank you for the updates and images.
22 April, 17:06
Bernhard Schrock
Michael ureol is A kind of foamed plastic. It comes in different degrees of foaming. The more foamed, the softer and lighter.
Michael ureol is A kind of foamed plastic. It comes in different degrees of foaming. The more foamed, the softer and lighter.
29 April, 09:32
Robert
Hallo sieht genial aus.
wo bekommt man sowas ? habe auch schon versucht sowas zu finden.
Hallo sieht genial aus.
wo bekommt man sowas ? habe auch schon versucht sowas zu finden.
29 April, 09:39
Michael Kohl
Ah, that explaines as well the nice texture the cushions have. Thanks for the info.
And - by the way - as always a pleasure to follow your delicate modelling.
Ah, that explaines as well the nice texture the cushions have. Thanks for the info.
And - by the way - as always a pleasure to follow your delicate modelling.
29 April, 10:43
Bernhard Schrock
Your are welcome.
Robert: vor paar Jahren habe ich von einem Modellbaubekannten Reste zum probieren gekriegt. Daher musste ich erst mal schauen, wo man das kriegt: eBay hier und da so wie bei Modulor in Berlin.
Your are welcome.
Robert: vor paar Jahren habe ich von einem Modellbaubekannten Reste zum probieren gekriegt. Daher musste ich erst mal schauen, wo man das kriegt: eBay hier und da so wie bei Modulor in Berlin.
29 April, 13:08
Gordon Sørensen
Great looking detail you are adding, Berhard! Those seat cushions are fantastic.
Great looking detail you are adding, Berhard! Those seat cushions are fantastic.
29 April, 13:27
Florian H.
Vergiss nicht, einen Kasten Bier bereitzustellen, wenn du die bordtoilette nutzt 😉
Vergiss nicht, einen Kasten Bier bereitzustellen, wenn du die bordtoilette nutzt 😉
29 April, 17:47
Bernhard Schrock
Thanks for comments and praise.I would like to share the praise with the excellent photographers (TN and BD). Ä Only such photos as from TN and BD make it possible.🙂
Thanks for comments and praise.I would like to share the praise with the excellent photographers (TN and BD). Ä Only such photos as from TN and BD make it possible.🙂
2 May, 16:10
bughunter
It was probably difficult to wire all the little rotary switches on the back. I assume that they all work!
It was probably difficult to wire all the little rotary switches on the back. I assume that they all work!
8 May, 09:42
Dan Parsons
Just absolutely fantastic Bernhard, I dont think everyone will appreciate just how difficult all those details you have added are to do. you have achieved what I only dreamed of achieving. I am lost for words with these details. Stunningly beautiful work.
Just absolutely fantastic Bernhard, I dont think everyone will appreciate just how difficult all those details you have added are to do. you have achieved what I only dreamed of achieving. I am lost for words with these details. Stunningly beautiful work.
8 May, 09:45
Bernhard Schrock
Thank you David, bughunter and Dan for you very motivating comments🙂. The Seaking is meanwhile my favorite helicopter. It was great to see one of them flying over the beach in Boltenhagen: we went on vacation there last year.🙂🙂
Thank you David, bughunter and Dan for you very motivating comments🙂. The Seaking is meanwhile my favorite helicopter. It was great to see one of them flying over the beach in Boltenhagen: we went on vacation there last year.🙂🙂
8 May, 15:13
Bruce Huxtable
I am impressed not only by your skills, Bernard, but also that you are not over-whelmed by the many, many fine details that you are taking on. RESPECT 🙂
I am impressed not only by your skills, Bernard, but also that you are not over-whelmed by the many, many fine details that you are taking on. RESPECT 🙂
8 May, 16:25
Hanno Kleinecke
Last monday I had the chance to take a very close look on all these masterpiece subassemblies in person - an all new level of depth in detail, even by Bernhard's standards !
These oxygen bottles look as if they were very closely related to 500 pound bombs….. ? 🙂
Last monday I had the chance to take a very close look on all these masterpiece subassemblies in person - an all new level of depth in detail, even by Bernhard's standards !
These oxygen bottles look as if they were very closely related to 500 pound bombs….. ? 🙂
18 May, 20:01
Bernhard Schrock
I'm happy that you like my bottles... 🙂. In fact, I have often used bombs as a basis for various parts. 🙂 This time, however, it is a sprue with a diameter of 4 mm.
I'm happy that you like my bottles... 🙂. In fact, I have often used bombs as a basis for various parts. 🙂 This time, however, it is a sprue with a diameter of 4 mm.
19 May, 06:17
gorby
The level of detail is mad. amongst the best scratch-building I have ever seen on Scalemates.
The level of detail is mad. amongst the best scratch-building I have ever seen on Scalemates.
26 May, 14:27
Alec K
Excellent progress. I like how in Germany, when helicopter model parts get mailed, one just has to write "Bernhard" on the box and it gets delivered to the right person… 😉 😄
Excellent progress. I like how in Germany, when helicopter model parts get mailed, one just has to write "Bernhard" on the box and it gets delivered to the right person… 😉 😄
27 May, 12:21
Hanno Kleinecke
I'm out of superlatives ! What can one say - you are constantly exceeding your own standards with this build, and that really says something !
Deeply stunned and impressed by your R.O. workstation !
I'm out of superlatives ! What can one say - you are constantly exceeding your own standards with this build, and that really says something !
Deeply stunned and impressed by your R.O. workstation !
27 May, 18:33
JAM-SCREW
Well, first test is passed - package arrived. Second test passed looks in good condition. 😋. Now is the real test. How does the builder feel about the parts and are they suitable for this unbelievably excellent project.... time will tell.🍻
Well, first test is passed - package arrived. Second test passed looks in good condition. 😋. Now is the real test. How does the builder feel about the parts and are they suitable for this unbelievably excellent project.... time will tell.🍻
28 May, 07:02
David Taylor
JAM-SCREW.How big is your production facilities,you might need bigger premises as your products look great albeit in the hands of a master modeller.
JAM-SCREW.How big is your production facilities,you might need bigger premises as your products look great albeit in the hands of a master modeller.
28 May, 14:28
bughunter
Wow, again every little sub-assembly is a fine model on it's own - fantastic 👍
Wow, again every little sub-assembly is a fine model on it's own - fantastic 👍
30 May, 14:44
Bernhard Schrock
Thx for you feedback 🙂🙂
The entire interior is lined with upholstery, which is primarily used for noise-insulation. Until yesterday, I broke my head because I didn't know how to repicate it… After a conversation with a mate (thx Hanno), the brilliant idea came to me: Fimo clay.
The material can be processed excellently and is solid in the oven after 30 minutes at 130°. The most important thing is that it does not become bone-hard but left elastic and can even be sanded.
Thx for you feedback 🙂🙂
The entire interior is lined with upholstery, which is primarily used for noise-insulation. Until yesterday, I broke my head because I didn't know how to repicate it… After a conversation with a mate (thx Hanno), the brilliant idea came to me: Fimo clay.
The material can be processed excellently and is solid in the oven after 30 minutes at 130°. The most important thing is that it does not become bone-hard but left elastic and can even be sanded.
1 June, 08:20
Michael Kohl
150 pics and you didn't even close the fuselage. And not a second of dullness. Finest modelling entertainment. 🙂
150 pics and you didn't even close the fuselage. And not a second of dullness. Finest modelling entertainment. 🙂
4 June, 17:09
Bernhard Schrock
This morning I was curious and unpacked the chassis of Jam-Screw. As already written, the quality is outstanding. But everything is so filigree that you have to be very careful and not to break anything when handling. I had to improvise a bit here and there. In the end, I was finished after 2 hours. Including preparation for laying the cables.
This morning I was curious and unpacked the chassis of Jam-Screw. As already written, the quality is outstanding. But everything is so filigree that you have to be very careful and not to break anything when handling. I had to improvise a bit here and there. In the end, I was finished after 2 hours. Including preparation for laying the cables.
8 June, 18:37
Tom Spiegelberg
Der Baufortschritt ist echt sehenswert und beeindruckend Bernhard. Die Bilder vom Innenraum von Dir und Thomas sind toll! Es gibt leider sehr wenig Bilder vom Original und sind eine tolle Vorlage. Vielleicht macht ihr nen extra Walkaround hier. Ich freue mich schon auf die nächsten Bilder.
Der Baufortschritt ist echt sehenswert und beeindruckend Bernhard. Die Bilder vom Innenraum von Dir und Thomas sind toll! Es gibt leider sehr wenig Bilder vom Original und sind eine tolle Vorlage. Vielleicht macht ihr nen extra Walkaround hier. Ich freue mich schon auf die nächsten Bilder.
9 June, 15:13
Bernhard Schrock
Danke fürs Lob Tom. 🙂. Dank der hervorragenden Innenraum-Fotos macht es wirklich sehr viel Freude herumzupuzzeln. Mein Seaking Projekt hat, könnte man sagen, eine „kritische Masse" erreicht. Dank diversen Kontakten zu Hubschrauber-Spezialisten, und ehemaligem Wart und nunmehr der Connection zur Jam-Screw habe ich die Möglichkeit offene Fragen auch dort zu klären. Für seine CAD files hat JS / Andy und seine Leute hunderte von Fotos geschossen, zu den ein normaler Sterblicher keinen Zugang hat.
Deinen Vorschlag werde ich an Thomas weiterleiten. Deine Idee ist sehr gut.🙂
Danke fürs Lob Tom. 🙂. Dank der hervorragenden Innenraum-Fotos macht es wirklich sehr viel Freude herumzupuzzeln. Mein Seaking Projekt hat, könnte man sagen, eine „kritische Masse" erreicht. Dank diversen Kontakten zu Hubschrauber-Spezialisten, und ehemaligem Wart und nunmehr der Connection zur Jam-Screw habe ich die Möglichkeit offene Fragen auch dort zu klären. Für seine CAD files hat JS / Andy und seine Leute hunderte von Fotos geschossen, zu den ein normaler Sterblicher keinen Zugang hat.
Deinen Vorschlag werde ich an Thomas weiterleiten. Deine Idee ist sehr gut.🙂
10 June, 08:18
Dietmar Bogatzki
Wahnsinn was du da reingesteckt hast allein die Instrumente und Sitze sind schon ne Show
Wahnsinn was du da reingesteckt hast allein die Instrumente und Sitze sind schon ne Show
17 June, 07:25
Bernhard Schrock
Thank you for the big praise. I am very happy to have such a large number of fans of this WIP.🙂🙂
Dietmar: nur dank der Unterstützung von einer Handvoll von Mk-41 Fans ist es mir möglich so tief in die Materie einzutauchen.
Übrigens: Ganz am Anfang wollte ich die Türen offen lassen und nur ein „bisschen" im Inneren tun. Aber als ich die Fotos von Thomas betrachtet habe, bin ich „getürmt und hab mich auf dem Boden versteckt". Irgendwann habe ich jedoch den „Zustand der inneren Ruhe" (die Phase wenn ich kein Problem mehr damit habe mich z.B. mit einem Rucksack aus Fimo eine halbe Stunde zu beschäftigen)🙂🙂 und betrachte es inzwischen als eine Herausforderung, wieviel ich von dem Zeug nachbauen kann.
Thank you for the big praise. I am very happy to have such a large number of fans of this WIP.🙂🙂
Dietmar: nur dank der Unterstützung von einer Handvoll von Mk-41 Fans ist es mir möglich so tief in die Materie einzutauchen.
Übrigens: Ganz am Anfang wollte ich die Türen offen lassen und nur ein „bisschen" im Inneren tun. Aber als ich die Fotos von Thomas betrachtet habe, bin ich „getürmt und hab mich auf dem Boden versteckt". Irgendwann habe ich jedoch den „Zustand der inneren Ruhe" (die Phase wenn ich kein Problem mehr damit habe mich z.B. mit einem Rucksack aus Fimo eine halbe Stunde zu beschäftigen)🙂🙂 und betrachte es inzwischen als eine Herausforderung, wieviel ich von dem Zeug nachbauen kann.
17 June, 18:24
JAM-SCREW
Very exciting to see what can be achieved with even a very good kit. Commitment and patience wonderful recipe for outstanding success. A pleasure to go along for this journey.
Very exciting to see what can be achieved with even a very good kit. Commitment and patience wonderful recipe for outstanding success. A pleasure to go along for this journey.
18 June, 08:41
Bernhard Schrock
Thank you for your unique and supportive comments !🙂🙂
It's a usual business copymashine/printer in tower design, Minolta serie 7.
Thank you for your unique and supportive comments !🙂🙂
It's a usual business copymashine/printer in tower design, Minolta serie 7.
18 June, 18:03
Bruce Huxtable
The interior is a delight to the eye, for sure. Inspirational modelling🙂
The interior is a delight to the eye, for sure. Inspirational modelling🙂
18 June, 18:28
Bernhard Schrock
🙂🙂.
The last big point for interior components is completed: rack for electronic equipment & foldable seat.
🙂🙂.
The last big point for interior components is completed: rack for electronic equipment & foldable seat.
26 June, 12:27
CaptGPF
God God! I'm just amazed how much scratch built detail you put into this build with each passing day!
God God! I'm just amazed how much scratch built detail you put into this build with each passing day!
30 June, 02:56
Bernhard Schrock
A waterproof green rubber mat is laid on the cabin floor of the SeaKings of the German Navy. However, not under the equipment rack and not in the area of the „shower cabin" (radaroperator workstation). There, the rubber mat was left out, shortened and folded upwards.
At the points of the mountingpoints and other hatches, access covers (probably also made of rubber) are incorporated into the rubber mat.
A waterproof green rubber mat is laid on the cabin floor of the SeaKings of the German Navy. However, not under the equipment rack and not in the area of the „shower cabin" (radaroperator workstation). There, the rubber mat was left out, shortened and folded upwards.
At the points of the mountingpoints and other hatches, access covers (probably also made of rubber) are incorporated into the rubber mat.
30 June, 12:13
Spanjaard
i really love the details of the rack for electronic equipment & foldable seat.
i really love the details of the rack for electronic equipment & foldable seat.
30 June, 19:07
Hanno Kleinecke
The lecture continues ! Altough it's a pity to partially hide all these wonderful details in the closing halves, I'm curious !
The lecture continues ! Altough it's a pity to partially hide all these wonderful details in the closing halves, I'm curious !
5 July, 08:12
Bernhard Schrock
After completing the engine housing I begun today detailing the bottom.
Just as on the fuselage sides, the equipment on the bottom of the Mk41 is different from the british variants.
After completing the engine housing I begun today detailing the bottom.
Just as on the fuselage sides, the equipment on the bottom of the Mk41 is different from the british variants.
10 July, 17:18
Alec K
The level of detailing on this thing is simply too notch. Number of bits you have added must be in the thousands! Masterclass 👍 👍👍
The level of detailing on this thing is simply too notch. Number of bits you have added must be in the thousands! Masterclass 👍 👍👍
14 July, 12:40
Dietmar Bogatzki
Einfach nur Geil.....hast du jede Niete nachgezählt, Bernhard 👍
Liebe solche Modellbauer da komme ich nicht mit
Einfach nur Geil.....hast du jede Niete nachgezählt, Bernhard 👍
Liebe solche Modellbauer da komme ich nicht mit
15 July, 11:19
Hanno Kleinecke
Holy smokes, this is escalating everytime I'm checking the progress here !
The Airfix-guys must be crying for their mama by now…….😄
Holy smokes, this is escalating everytime I'm checking the progress here !
The Airfix-guys must be crying for their mama by now…….😄
15 July, 18:20
Qwertzel
Sehr schöner Innenraum. Ich liebe deine medizinischen Hilfsmittel. Bin selber im Thema drin und kann keinen Unterschied zu den realen Maschinen feststellen. Echt gute Arbeit!
Sehr schöner Innenraum. Ich liebe deine medizinischen Hilfsmittel. Bin selber im Thema drin und kann keinen Unterschied zu den realen Maschinen feststellen. Echt gute Arbeit!
20 July, 16:58
Bernhard Schrock
Thank you for the last wave of such nice comments. I have the last big hurdle to taken: installing clear parts for the cockpit without mess.
Qwertzel: freut mich, dass dir mein Medizin-Equipment gefällt. Du hast erwähnt, dass du selbst sehr dicht dran bist. Hab gesehen dass du auch einen Rettungs Quirl im Bau hast bzw. Eine ganze Menge von Feuerwehrfahrzeugen. Bist du selbst auch im Einsatz? LG B
Thank you for the last wave of such nice comments. I have the last big hurdle to taken: installing clear parts for the cockpit without mess.
Qwertzel: freut mich, dass dir mein Medizin-Equipment gefällt. Du hast erwähnt, dass du selbst sehr dicht dran bist. Hab gesehen dass du auch einen Rettungs Quirl im Bau hast bzw. Eine ganze Menge von Feuerwehrfahrzeugen. Bist du selbst auch im Einsatz? LG B
20 July, 18:26
Qwertzel
Ja, kann man so sagen. Bin seit mehreren Jahren bei der freiwilligen Feuerwehr, bei den Maltesern und beim DRK im Sanitätsdienst und Katastrophenschutz. Ab einem gewissen Punkt ist das ganze Rettungswesen eher eine Lebenseinstellung, anstelle eines Hobbys
Ja, kann man so sagen. Bin seit mehreren Jahren bei der freiwilligen Feuerwehr, bei den Maltesern und beim DRK im Sanitätsdienst und Katastrophenschutz. Ab einem gewissen Punkt ist das ganze Rettungswesen eher eine Lebenseinstellung, anstelle eines Hobbys
20 July, 20:23
Alec K
… and they are in place, flawlessly installed. I admire your precision, truly excellent 👍
… and they are in place, flawlessly installed. I admire your precision, truly excellent 👍
27 July, 13:22
Bernhard Schrock
Thank you Alec: Your comment honors me very much.
Today morning I worked on the nose, installed several parts of SeMa Models And finally the „thing" looks like a Mk41. 🙂
Thank you Alec: Your comment honors me very much.
Today morning I worked on the nose, installed several parts of SeMa Models And finally the „thing" looks like a Mk41. 🙂
28 July, 11:23
Zbynek Honzik
I look at the photos and marvel at the precision and modeling skill. Fantastic, Bernhard! 👏👏👏
I look at the photos and marvel at the precision and modeling skill. Fantastic, Bernhard! 👏👏👏
30 July, 09:38
Hanno Kleinecke
Incredibly realistic look and extraterrestrial cleanliness in paintjob and especially masking the clearparts, exemplary !
Incredibly realistic look and extraterrestrial cleanliness in paintjob and especially masking the clearparts, exemplary !
30 July, 20:29
John
Looks amazing! Beautiful results on that glass, I bet that felt good to remove and see the results. 👍
Looks amazing! Beautiful results on that glass, I bet that felt good to remove and see the results. 👍
30 July, 23:50
Bernhard Schrock
I have hardly any experience with 3D printed parts, especially concerning the flexibility. The material used by Jam-Screw is quite brittle. Therefore, I decided to disconnect the axles and insert a wire. This also has the advantage that you can align the wheels precisely afterwards, especially because they are flattened.
I have hardly any experience with 3D printed parts, especially concerning the flexibility. The material used by Jam-Screw is quite brittle. Therefore, I decided to disconnect the axles and insert a wire. This also has the advantage that you can align the wheels precisely afterwards, especially because they are flattened.
10 August, 16:11
Bernhard Schrock
Thank you mates. 🙂
Result of a modeling mini task: DIY FOD covers.
I wanted to be very „smart" and install the exhaust pipes from the outside after painting. I overlooked that the opening in the fuselage is much smaller than the „hidden" end. Therefore, I had to improvise: I sawed off the outer end and inserted them obliquely from the outside.
Thank you mates. 🙂
Result of a modeling mini task: DIY FOD covers.
I wanted to be very „smart" and install the exhaust pipes from the outside after painting. I overlooked that the opening in the fuselage is much smaller than the „hidden" end. Therefore, I had to improvise: I sawed off the outer end and inserted them obliquely from the outside.
17 August, 17:33
Alec K
I just can't get over the sharpness of the color separations. Absolutely straight, no ragged sections. Superb.
I just can't get over the sharpness of the color separations. Absolutely straight, no ragged sections. Superb.
17 August, 21:35
Bernhard Schrock
🙂 🙂
As usual I installed the door without glueing via 2 x piece of 0,26 mm wire. I drilled 2 holes (0,24 mm) from outside through the door into the fuselage.
Who can find the two places? 🙂
🙂 🙂
As usual I installed the door without glueing via 2 x piece of 0,26 mm wire. I drilled 2 holes (0,24 mm) from outside through the door into the fuselage.
Who can find the two places? 🙂
18 August, 10:36
Bernhard Schrock
Today I finished one of the last complex parts for the fuselage. The whippers. What do you think: how many individual parts does a windscreen wiper consist of? 🙂
Today I finished one of the last complex parts for the fuselage. The whippers. What do you think: how many individual parts does a windscreen wiper consist of? 🙂
22 August, 15:49
Sergej I
You missed the wiper mechanism spring 😄
Joking, I have no idea how you manage to cut and drill such microparts.
You missed the wiper mechanism spring 😄
Joking, I have no idea how you manage to cut and drill such microparts.
22 August, 18:56
gorby
Just been looking at your wipers in awe (not a phrase I thought I'm be using this morning). Stunning work!
Just been looking at your wipers in awe (not a phrase I thought I'm be using this morning). Stunning work!
23 August, 07:21
Bruce Huxtable
Fully-functioning wipers? Too much for my brain to comprehend...... Amazing, Bernhard, amazing...!
Fully-functioning wipers? Too much for my brain to comprehend...... Amazing, Bernhard, amazing...!
23 August, 14:38
Bernhard Schrock
Never before have I completed a tailrotor in this quality in such a short time! Thanks to Jam Screw!!!🙂🙂🙂 Compared to the original, all this is great: even the kink at the back edge of the blades is reproduced correctly.
Never before have I completed a tailrotor in this quality in such a short time! Thanks to Jam Screw!!!🙂🙂🙂 Compared to the original, all this is great: even the kink at the back edge of the blades is reproduced correctly.
25 August, 11:53
Michael Kohl
Your spectacular build and pic 255 makes me wanna build one german SAR Seaking too.
Your spectacular build and pic 255 makes me wanna build one german SAR Seaking too.
1 September, 05:14
Bernhard Schrock
I'm glad I was able to inspire you for this machine. By the way, I was lucky/opportune to see the 89 + 63 and 83 + 58 live on Friday at the very last statics display in Nordholz. Hence the photos: in bright sunshine! All spotters were really lucky!🙂🙂
I'm glad I was able to inspire you for this machine. By the way, I was lucky/opportune to see the 89 + 63 and 83 + 58 live on Friday at the very last statics display in Nordholz. Hence the photos: in bright sunshine! All spotters were really lucky!🙂🙂
1 September, 08:06
bughunter
Oh yes, great pictures of the original - I really like the "stressed skin effect"!
And I learned recently during my visit in Oberursel museum (reported that on SM) how the filter works, which you show in pic260.
Fantastic modeling show here 👍
Oh yes, great pictures of the original - I really like the "stressed skin effect"!
And I learned recently during my visit in Oberursel museum (reported that on SM) how the filter works, which you show in pic260.
Fantastic modeling show here 👍
1 September, 11:55
Mark de Boer
WOW, all out on the details, Dont think i have ever seen a more acurately detailed model before. Think this is a price winner. Very beautifull.
WOW, all out on the details, Dont think i have ever seen a more acurately detailed model before. Think this is a price winner. Very beautifull.
1 September, 12:06
KyMustang
This is very impressive. Can you give a tutorial on how you achieved the stressed skin effect?
This is very impressive. Can you give a tutorial on how you achieved the stressed skin effect?
1 September, 15:57
Tom Spiegelberg
Schön, dass Du noch das Vorbild in echt sehen konntest! Ein toller Moment, den man nicht so schnell vergisst. Ich hoffe, Du hast noch genug Fotos gemacht hast! Wäre cool gewesen das fertige Modell neben das Original zu stellen. Weißt Du was aus 89+63 wird?
Schön, dass Du noch das Vorbild in echt sehen konntest! Ein toller Moment, den man nicht so schnell vergisst. Ich hoffe, Du hast noch genug Fotos gemacht hast! Wäre cool gewesen das fertige Modell neben das Original zu stellen. Weißt Du was aus 89+63 wird?
1 September, 19:08
Bernhard Schrock
KyMustang: the Seaking - Kit of Airfix is on of few witch offers stressed skin.
Tom: in der Tat, das war das Ereignis des Monats! Wie bereits schon geschrieben, habe ich das große Glück, Mitglied einer WhatsApp-Seaking-Taskforce 🙂 zu sein. Felix und Thomas waren gestern bei dem VIP Termin dabei und haben ihre Informationen in der Gruppe geteilt. Demnach bleibt die 63 in Nordholz. Vielleicht ergibt sich mal eine Gelegenheit, das Modell mitzunehmen und nach Nordholz zu fahren. Vielleicht hätten die Museumsmitarbeiter Interesse das Ding in klein zu sehen.
KyMustang: the Seaking - Kit of Airfix is on of few witch offers stressed skin.
Tom: in der Tat, das war das Ereignis des Monats! Wie bereits schon geschrieben, habe ich das große Glück, Mitglied einer WhatsApp-Seaking-Taskforce 🙂 zu sein. Felix und Thomas waren gestern bei dem VIP Termin dabei und haben ihre Informationen in der Gruppe geteilt. Demnach bleibt die 63 in Nordholz. Vielleicht ergibt sich mal eine Gelegenheit, das Modell mitzunehmen und nach Nordholz zu fahren. Vielleicht hätten die Museumsmitarbeiter Interesse das Ding in klein zu sehen.
1 September, 20:04
Bernhard Schrock
I'm just waiting for the decals (thanks DF 🙂🙂) and taking a creative break. For a change, I opened another box 🙂
I'm just waiting for the decals (thanks DF 🙂🙂) and taking a creative break. For a change, I opened another box 🙂
2 September, 18:47
Aaron Konz
Wow! This is extremly impressive!! Build already 2 Airfix Sea Kings but this is a whole other level!! 🤩 I also want to build this retro Sea King (I was also present during the spottersday and the last flight. Can you tell me witch decals you will use? Thanks in advance!
Wow! This is extremly impressive!! Build already 2 Airfix Sea Kings but this is a whole other level!! 🤩 I also want to build this retro Sea King (I was also present during the spottersday and the last flight. Can you tell me witch decals you will use? Thanks in advance!
21 September, 15:47
Bernhard Schrock
Good morning Aaron,
thank you for the praise! That was indeed a great experience for me in Nordholz to see the 89+63 live on friday. 🙂I would have liked to see the Seaking in flight on saturday🙁
The decals have been created by a modeling-friend exclusively for me and our Seaking task force 🙂.
HSQ / Mr. Fienne Schola has released a sheet exactly for the 89+63. Here are two links.
https://ebay.de/itm/186437323778
heli-scale-quality.d..iebebilder:::53.html
Good morning Aaron,
thank you for the praise! That was indeed a great experience for me in Nordholz to see the 89+63 live on friday. 🙂I would have liked to see the Seaking in flight on saturday🙁
The decals have been created by a modeling-friend exclusively for me and our Seaking task force 🙂.
HSQ / Mr. Fienne Schola has released a sheet exactly for the 89+63. Here are two links.
https://ebay.de/itm/186437323778
heli-scale-quality.d..iebebilder:::53.html
22 September, 06:09
Bernhard Schrock
I got the decals on Friday. Everything except the blue elements is meanwhile in the right place: I'm thrilled! Thank you very much David!!🙂🙂🙂🙂🙂
I got the decals on Friday. Everything except the blue elements is meanwhile in the right place: I'm thrilled! Thank you very much David!!🙂🙂🙂🙂🙂
22 September, 14:25
Alexander Grivonev
Bernhard, es ist atemberaubend was Du hier zauberst! Erste Liga, ohne Worte 👍
Bernhard, es ist atemberaubend was Du hier zauberst! Erste Liga, ohne Worte 👍
22 September, 14:34
Hanno Kleinecke
Last Monday I had the opportunity to lay my eyes on this milestone in the making, even more impressive in reality. So now it's decalling time !
Finish line in sight !
Last Monday I had the opportunity to lay my eyes on this milestone in the making, even more impressive in reality. So now it's decalling time !
Finish line in sight !
23 September, 19:19
Mr D
The large decal has layed down nicely 👌, looks a difficult area!!
Nice job your doing 👍👍
The large decal has layed down nicely 👌, looks a difficult area!!
Nice job your doing 👍👍
23 September, 19:24
Mr D
Rotors are nice job, interesting model this one ....and very popular, lots of interest.
Best of luck with next steps 😃👍👍
Rotors are nice job, interesting model this one ....and very popular, lots of interest.
Best of luck with next steps 😃👍👍
25 September, 18:49
Stéphane Jayet
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
30 14 July, 16:30
Stéphane Jayet
Promising kit replacing glue by screw in many cases, but there are some moulding issue, so parts have to be well prepared.
Promising kit replacing glue by screw in many cases, but there are some moulding issue, so parts have to be well prepared.
16 July, 11:27
Stéphane Jayet
@george, during my vacations for 2 weeks I installed some books on it and it is now almost ok
@george, during my vacations for 2 weeks I installed some books on it and it is now almost ok
10 August, 14:59
bossy122
How will you do the black pinstripe? That is what has always kept me from trying this kit.
How will you do the black pinstripe? That is what has always kept me from trying this kit.
12 October, 06:42
Jeroen
äger denna artikel
äger denna artikel
Airbrush Camo-Mask for 1/35 Sweden Strv 103C MBT Camo Scheme
J's Work 1:35
PPA5080 12 October, 08:00
Tobias Lewandovski
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
10 bilder
Italeri - Lamborghini Diablo - Done!Ny: 11 October, 19:01 1:24
Projekt: Italeri - Lamborghini Diablo
7 11 October, 19:00
Christian Orion Adler
äger denna artikel
äger denna artikel
Panzerfähre Fährendeck mit gepanzertem Landwasserschlepper Prototype Nr.II
Dragon 1:72
7509 2013 Nya delar 12 October, 07:56
/sv/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sv
35
35
/sv/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo