Nyhetsflöde
Chris Potter
vill ha den här artikeln
vill ha den här artikeln
Sea King HAR Mk.3/5/AEW Mk.2A Pilot And Co-Pilot Seats
Aires 1:48
4914 6 October, 09:30
Bill Mathews
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
28 16 September, 10:21
Bill Mathews
Skyhiker - I've never used it for that , just as an alternative to 2pack epoxy glue . I'll try it out on something as I recall someone saying you could use it for canopies
Skyhiker - I've never used it for that , just as an alternative to 2pack epoxy glue . I'll try it out on something as I recall someone saying you could use it for canopies
19 September, 18:40
Bill Mathews
For Skyhiker - clear gorilla glue on a 109 canopy . No fogging (but admittedly it wasn't in an enclosed area to concentrate any fumes ) looks like it will be fine - but gorilla glue takes a VERY LONG time to cure - overnight . It will move and self level if you use a lot of it
For Skyhiker - clear gorilla glue on a 109 canopy . No fogging (but admittedly it wasn't in an enclosed area to concentrate any fumes ) looks like it will be fine - but gorilla glue takes a VERY LONG time to cure - overnight . It will move and self level if you use a lot of it
20 September, 10:19
Skyhiker
Thanks Bill. That glue is interesting to see. Perhaps it's another tool in the kit to consider.
Thanks Bill. That glue is interesting to see. Perhaps it's another tool in the kit to consider.
22 September, 04:16
Ricardo Reis
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
38 1 October, 22:43
Alexander Grivonev
Oh that looks amazing, so much variety in color and little details, great markings. Beautiful paintjob and subtle weathering as well👍👍
Oh that looks amazing, so much variety in color and little details, great markings. Beautiful paintjob and subtle weathering as well👍👍
2 October, 06:17
Christian Bruer
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
88 1 February, 21:01
Christian Bruer
Bergepanther Ausf. D, Dragon kit Panther Ausf. D, Fat Frog Models tracks and some scratchbuild details to present an early Bergepanther.
An easy self made conversion for an interesting recovery vehicle. I will add drawbars, a rack with a timber and the wooden hatch above the turret opening.
Happy Modelling
Christian
Bergepanther Ausf. D, Dragon kit Panther Ausf. D, Fat Frog Models tracks and some scratchbuild details to present an early Bergepanther.
An easy self made conversion for an interesting recovery vehicle. I will add drawbars, a rack with a timber and the wooden hatch above the turret opening.
Happy Modelling
Christian
1 February, 21:07
Christian Bruer
WIP on my Bergepanther conversion. Today I added the wooden planking and hinges ontop of the turret opening cover.
Happy Modelling
Christian
WIP on my Bergepanther conversion. Today I added the wooden planking and hinges ontop of the turret opening cover.
Happy Modelling
Christian
2 February, 20:41
Christian Bruer
Thx Alex and Jennifer🙂 Still enough place in the first row by the way 😉
Thx Alex and Jennifer🙂 Still enough place in the first row by the way 😉
4 February, 09:44
Tom B.
Taking up one of those firstt row seats on this one! These Fat Frog tracks are really neat, currently using a set on a King Tiger... Looking forward to more of the scratchbuilt addons 👍
Taking up one of those firstt row seats on this one! These Fat Frog tracks are really neat, currently using a set on a King Tiger... Looking forward to more of the scratchbuilt addons 👍
4 February, 18:04
Christian Bruer
You're welcome Tom B. 🙂
Indeed the Fat Frog tracks are really nice, but a lil bit tricky to remove all the printing supports mainly on the inner side of the tracks.
You're welcome Tom B. 🙂
Indeed the Fat Frog tracks are really nice, but a lil bit tricky to remove all the printing supports mainly on the inner side of the tracks.
5 February, 19:09
Christian Bruer
WIP on my Bergepanther conversion. Tow bars and wooden beam added.
So far I have no references for early Bergepanther using the wooden beam, but let's assume it is a field modification.
Happy Modelling
Christian
WIP on my Bergepanther conversion. Tow bars and wooden beam added.
So far I have no references for early Bergepanther using the wooden beam, but let's assume it is a field modification.
Happy Modelling
Christian
5 February, 19:56
Christian Bruer
WIP on my Bergepanther. Rear plate, details added. I cut the covers and hatches off from the kit part. Muchveasier than to rebuild the details.
Happy Modelling
Christian
WIP on my Bergepanther. Rear plate, details added. I cut the covers and hatches off from the kit part. Muchveasier than to rebuild the details.
Happy Modelling
Christian
6 February, 19:32
Christian Bruer
Thank you very much for your kind comments Alec, Jennifer and gorby 🙂
Thank you very much for your kind comments Alec, Jennifer and gorby 🙂
9 February, 17:38
Christian Bruer
The exterior is finished. I think I will add some interior because I will the hatches left open.
Happy Modelling
Christian
The exterior is finished. I think I will add some interior because I will the hatches left open.
Happy Modelling
Christian
11 February, 18:29
Jennifer Franklin
Did you paint the metal pieces to look like metal or are they real metal pieces?
Did you paint the metal pieces to look like metal or are they real metal pieces?
11 February, 20:38
Christian Bruer
Jennifer, I gues you asked about the enging grill covers. These are brass photo etch parts from a Flyhawk PE Set.
Jennifer, I gues you asked about the enging grill covers. These are brass photo etch parts from a Flyhawk PE Set.
11 February, 20:51
Christian Bruer
Yep, they're nicely done.
I decide to add some figures, crew and chatting tank drivers.
Happy Modelling
Christian
Yep, they're nicely done.
I decide to add some figures, crew and chatting tank drivers.
Happy Modelling
Christian
18 February, 16:24
Christian Bruer
Nearly there, just a few highlights to paint and the brackets for the Schürzen to add.
Happy Modelling
Christian
Nearly there, just a few highlights to paint and the brackets for the Schürzen to add.
Happy Modelling
Christian
31 July, 19:35
Christian Bruer
Well, the Bergepanther is finished. Next figures and a small vignette.
Happy Modelling
Christian
Well, the Bergepanther is finished. Next figures and a small vignette.
Happy Modelling
Christian
4 August, 20:50
subotai
Isn´t the rubber on the wheels a bit too clean? But nevertheless a beauty of couse 🙂
Did you use a template for the rubber? It looks so evenly painted. Mine is most times a mess 🙁
Isn´t the rubber on the wheels a bit too clean? But nevertheless a beauty of couse 🙂
Did you use a template for the rubber? It looks so evenly painted. Mine is most times a mess 🙁
5 August, 14:48
Christian Bruer
Thx subotai for your kind comment and your thoughts 🙂👍
I'd like to present mostly dry mud what stuck to the tracks and wheels, so I kept the rubber cleaner than the rest. So far following some reference photos I used to follow.
About the paintwork, I did not used a template but painted the rubber free hand along the edges of the wheels.
Thx subotai for your kind comment and your thoughts 🙂👍
I'd like to present mostly dry mud what stuck to the tracks and wheels, so I kept the rubber cleaner than the rest. So far following some reference photos I used to follow.
About the paintwork, I did not used a template but painted the rubber free hand along the edges of the wheels.
5 August, 16:37
Christian Bruer
Some crew figures are meanwhile painted.
Happy Modelling, Christian
Some crew figures are meanwhile painted.
Happy Modelling, Christian
17 September, 13:28
Jennifer Franklin
How did you manage to get such good detail on those tiny figures?
How did you manage to get such good detail on those tiny figures?
18 September, 02:29
Jan Peters
This would look great if it was 1:35th scale, in 1:72 it is sheer magic ✨
Beautiful work Christian!
This would look great if it was 1:35th scale, in 1:72 it is sheer magic ✨
Beautiful work Christian!
19 September, 15:23
Christian Bruer
Thank you Jan 🙂 And, the large scale guys have a kit, we smallscaler need to do a conversion 😁
Thank you Jan 🙂 And, the large scale guys have a kit, we smallscaler need to do a conversion 😁
19 September, 17:30
Jennifer Franklin
I can't believe you managed to paint a camo pattern on those tiny little guys
I can't believe you managed to paint a camo pattern on those tiny little guys
29 September, 16:49
Ingmar Stöhr
Looking great so far! Nice paint job on those tiny figures. I hope to see this live at SMC?
Looking great so far! Nice paint job on those tiny figures. I hope to see this live at SMC?
3 October, 09:58
Weizenbrot
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
5 bilder
A-10ANy: 6 October, 09:20 1:48
I have finished dry fit of the kit. The finished parts of this aircraft were divided into few assemblies. Interior of so...
Projekt: A-10A Thunderbolt
6 October, 09:19
Agnius
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
12 30 September, 19:19
Phenix Outis
äger denna artikel
äger denna artikel
Gloster Gladiator Mk.II - Sea Gladiator cockpit detail set Roden
True Details 1:48
48496 200x Nya delar 6 October, 09:17
/sv/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sv
35
35
/sv/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo