Nyhetsflöde
Marek Nagy
startade den här artikeln
startade den här artikeln
Fw 190A-5 light fighter Overtrees - Sprues only; no decals, instructions, mask or PE parts
Eduard 1:48
82143X 2018 Ny låda 8 November, 13:12
Toffee
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
9 bilder
Revell Mil Mi-24D Ny: 8 November, 09:55 1:48
Happy with the results, despite the rotor mishap
Projekt: Revell Mil Mi-24D
8 8 November, 09:53
Matti Thomaes
Nice result, camo looks great. Shame about the rotor, but you could just put it on a concrete airfield display and entitle it 'it was a very hot day'
Nice result, camo looks great. Shame about the rotor, but you could just put it on a concrete airfield display and entitle it 'it was a very hot day'
8 November, 13:12
Mr D
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
71 bilder
Beriev Be-6 flying boat/ By Playfix -Veb -Plasticart & Revell 1:72No
Darkened the lines in the control surfaces....the Ailerons move.
I'm just waiting on some white Tamiya paint ....as the...
38 24 July, 16:32
Mr D
Thanks for the likes 😁👍 it's interesting to see how a 33 year old kit builds up ??
Thanks for the likes 😁👍 it's interesting to see how a 33 year old kit builds up ??
1 August, 15:31
Edouard Carr
Great idea about the watch pins! ⌚ Definitely gonna try this out on my builds. Looking forward to the finished result.
Great idea about the watch pins! ⌚ Definitely gonna try this out on my builds. Looking forward to the finished result.
1 September, 08:43
Mr D
Hi Edouard👋😀👍.
Yes l just get cheap ones of eBay, the do different sizes, you can pull ends n spring out for barrel look, or file ends last to have a recoil cannon look.
The gun turret nearly there now....lots of sanding n filling low spot.
Thanks for looking in on build.👍👍
Hi Edouard👋😀👍.
Yes l just get cheap ones of eBay, the do different sizes, you can pull ends n spring out for barrel look, or file ends last to have a recoil cannon look.
The gun turret nearly there now....lots of sanding n filling low spot.
Thanks for looking in on build.👍👍
1 September, 13:24
Zbynek Honzik
I'm very curious to see the result. I built this model as a young boy too.
I'm very curious to see the result. I built this model as a young boy too.
4 September, 20:22
Mr D
Hi Zbynek 👋🙂👍.
Thanks for your interest. Nice to know you had it too, l built X3 the Tu airliner and the bomber. But this was my favourite as l liked the shape and that it had floats n guns.
Got part of tail on this evening.
Keep looking in for updates 😃👍👍
Hi Zbynek 👋🙂👍.
Thanks for your interest. Nice to know you had it too, l built X3 the Tu airliner and the bomber. But this was my favourite as l liked the shape and that it had floats n guns.
Got part of tail on this evening.
Keep looking in for updates 😃👍👍
4 September, 20:57
Mr D
Good to have you along Guy 👋😃.
Bit of fine sanding n tidying to do next then look at getting an engine effect in cowling area.
I replaced side vent for smaller one now, checked photos... and l made it way to big.
Catch you on the next steps.
Good to have you along Guy 👋😃.
Bit of fine sanding n tidying to do next then look at getting an engine effect in cowling area.
I replaced side vent for smaller one now, checked photos... and l made it way to big.
Catch you on the next steps.
7 September, 20:15
Edouard Carr
Hey Mr D whats the Gorilla Glue like? Is it a clear PVA or a resin Super Glue Type? Do you use it just for clear bits or as n all purpose? Thanks in advance E.
Hey Mr D whats the Gorilla Glue like? Is it a clear PVA or a resin Super Glue Type? Do you use it just for clear bits or as n all purpose? Thanks in advance E.
12 September, 21:46
Mr D
Hi, it dries 100% clear but is slow.. to air dry ..so leave overnight.
But it's worth it as very strong. And is very neutral on paint and clear parts.
It's almost like an air drying epoxy, not harsh like super glue or poli ...very safe.
I only use it on clear stuff as it's stronger than PVA but not good for general building.. l do use it to fill gaps sometimes.
👍
Hi, it dries 100% clear but is slow.. to air dry ..so leave overnight.
But it's worth it as very strong. And is very neutral on paint and clear parts.
It's almost like an air drying epoxy, not harsh like super glue or poli ...very safe.
I only use it on clear stuff as it's stronger than PVA but not good for general building.. l do use it to fill gaps sometimes.
👍
13 September, 10:34
Mike Montgomery
Don't think I'd trust those decals. The red stars are easy enough to replace or paint on, the bort numbers might be more of a challenge.
Don't think I'd trust those decals. The red stars are easy enough to replace or paint on, the bort numbers might be more of a challenge.
13 September, 12:47
Mr D
Hi Edouard 👋..yes 🤣 lm on 12 model with it and never had anything come loose.
Mike👋.... No mention neither! I've purchased some more Soviet stars now, may have some numbers leftover from others project's.
Gorby, Thanks buddy 👍
Hi Edouard 👋..yes 🤣 lm on 12 model with it and never had anything come loose.
Mike👋.... No mention neither! I've purchased some more Soviet stars now, may have some numbers leftover from others project's.
Gorby, Thanks buddy 👍
13 September, 15:53
Christian W
This is a quite interessting plane you're building! I like the shape of the wings. Pretty good build and pictures.
This is a quite interessting plane you're building! I like the shape of the wings. Pretty good build and pictures.
18 September, 04:57
Mr D
@ Christian W.
Thanks buddy 🙂👍
Yes it a bit different, yes has nice gull-wings.
It's a trip down memory lane for me... I slapped one together back in 1991 as a kid.
Thanks for the interest.... I like seeing people's build processes n history....so doing the same.👍👍
@ Christian W.
Thanks buddy 🙂👍
Yes it a bit different, yes has nice gull-wings.
It's a trip down memory lane for me... I slapped one together back in 1991 as a kid.
Thanks for the interest.... I like seeing people's build processes n history....so doing the same.👍👍
18 September, 16:41
Zbynek Honzik
I'm anxiously waiting at the monitor for the paint job! Fingers crossed!
I'm anxiously waiting at the monitor for the paint job! Fingers crossed!
18 September, 19:04
Christian W
Mr D ... 🙂 I like too to see, how much progress my skills during the last 10 years did. Good for me is, that I own most of my model kits since I was a kid. My first plane, car and truck are still in my shelf or boxes.
Because I stumbled somehow over your wip, I checked the history of the kit. It is rally unbelievble, that those engine openings are on the bottom of the motors. Amazing. I wouldn't notice that without your hint.
Mr D ... 🙂 I like too to see, how much progress my skills during the last 10 years did. Good for me is, that I own most of my model kits since I was a kid. My first plane, car and truck are still in my shelf or boxes.
Because I stumbled somehow over your wip, I checked the history of the kit. It is rally unbelievble, that those engine openings are on the bottom of the motors. Amazing. I wouldn't notice that without your hint.
19 September, 04:25
Lorraine Lin
Cannot wait to see the result. Your work reminds me of my first kit, it was a Victor bomber by Matchbox (They had a JV factory in Shanghai at that time). But hard find it in the market now.
Cannot wait to see the result. Your work reminds me of my first kit, it was a Victor bomber by Matchbox (They had a JV factory in Shanghai at that time). But hard find it in the market now.
21 September, 11:33
Mr D
Hi Lorraine 👋.
Glad your interested 👍 there are X2 colour schemes for the be-6 the Soviet green or the Chinese blue, l liked the blue version but could only find suitable replacement decals for Soviet.
My first kit was the Matchbox Electric lightning,.... Built it with my dad....was nice as was 3 colour plastic out the box.
The first models l built on my own were the Veb/Playfix be-6, & Tu- bomber, so nice to revisit.
Got X2 models at min I'm preparing for paint.
Yours is coming along well...."carefully work" 👍👍
Hi Lorraine 👋.
Glad your interested 👍 there are X2 colour schemes for the be-6 the Soviet green or the Chinese blue, l liked the blue version but could only find suitable replacement decals for Soviet.
My first kit was the Matchbox Electric lightning,.... Built it with my dad....was nice as was 3 colour plastic out the box.
The first models l built on my own were the Veb/Playfix be-6, & Tu- bomber, so nice to revisit.
Got X2 models at min I'm preparing for paint.
Yours is coming along well...."carefully work" 👍👍
21 September, 15:00
Mr D
Thanks Skyhiker 👍
I usually use Velejo or AK acrylic, but I'm going to use Tamiya on this one as it won't fit in cabinet.....and l find Tamiya acrylic is a tough paint better for wear n tear, as I'm sure it's going to need dusting now n then 🙄🤣.
The Tamiya paint turns out to be darker than advertised on the lid n chart, I've ordered a white n thinner to Tone down.
Like you I've had 2x build going on.
The Fw-190 really pop's once decals are on..... Remember the trim tabs are red....l just had paint.
😁👍
Thanks Skyhiker 👍
I usually use Velejo or AK acrylic, but I'm going to use Tamiya on this one as it won't fit in cabinet.....and l find Tamiya acrylic is a tough paint better for wear n tear, as I'm sure it's going to need dusting now n then 🙄🤣.
The Tamiya paint turns out to be darker than advertised on the lid n chart, I've ordered a white n thinner to Tone down.
Like you I've had 2x build going on.
The Fw-190 really pop's once decals are on..... Remember the trim tabs are red....l just had paint.
😁👍
12 October, 21:34
Marko
As a child, I once built the kit with my father.
Very simple kit of its time. But the shapes and proportions are convincing and you really did a fantastic job with it. I'm looking forward to the finished model.👍
As a child, I once built the kit with my father.
Very simple kit of its time. But the shapes and proportions are convincing and you really did a fantastic job with it. I'm looking forward to the finished model.👍
5 November, 21:40
Mr D
Hi Marko👋
Nice to hear you have good memories too, first kit l built with my Dad was the Matchbox Electric lightning, it was good as had 3 colours... think my dad painted few bits silver too.
the Veb Playfix kits l would buy on Saturday morning with pocket money it came with strange pot glue.
I built 3 or 4 definitely built the Bear soviet bomber...l can remember.
Funny you commented on this tonight......as l was just checking it over ready for paint in next few days. I've just been wrapping up my IAR-80 project.
😁👍 Stay tuned
Hi Marko👋
Nice to hear you have good memories too, first kit l built with my Dad was the Matchbox Electric lightning, it was good as had 3 colours... think my dad painted few bits silver too.
the Veb Playfix kits l would buy on Saturday morning with pocket money it came with strange pot glue.
I built 3 or 4 definitely built the Bear soviet bomber...l can remember.
Funny you commented on this tonight......as l was just checking it over ready for paint in next few days. I've just been wrapping up my IAR-80 project.
😁👍 Stay tuned
5 November, 22:19
Marek Nagy
äger denna artikel
äger denna artikel
Fw 190A-5 light fighter Overtrees - Sprues only; no decals, instructions, mask or PE parts
Eduard 1:48
82143X 2018 Ny låda 8 November, 13:09
Mr D
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
112 bilder
MyAlbum1:
The alterations from M-35 to ZiL,
Grill, roof, hood, window shape mainly.
Wing mirrors, gas tank, spare tire, and exhau...
Scratchbuilt
41 23 April, 22:42
Skyhiker
That's a cool idea using a car sponge to hold the model. I think I will have to get one.
That's a cool idea using a car sponge to hold the model. I think I will have to get one.
6 July, 16:00
John
Regarding the Gnat, use white or pink (really!) as a base coat for yellow and it covers in fewer coats. Tamiya's yellow is probably better than most but it's still a difficult color to work with.
Regarding the Gnat, use white or pink (really!) as a base coat for yellow and it covers in fewer coats. Tamiya's yellow is probably better than most but it's still a difficult color to work with.
7 July, 12:09
Mr D
Great 👍 thanks for letting me know, l been a bit confused when I've seen people spraying pink 🤔?? Then paint over. Now it makes sense will try it next time. Cheers 😀
Great 👍 thanks for letting me know, l been a bit confused when I've seen people spraying pink 🤔?? Then paint over. Now it makes sense will try it next time. Cheers 😀
7 July, 17:02
Rene Brix
markerade denna artikel som säljbar / sellable
markerade denna artikel som säljbar / sellable
Russian Cruiser Varyag Wooden Deck for Zvezda #9014 kit
Wood Hunter 1:350
W35001 8 November, 13:07
Mr D
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
28 bilder
MyAlbumNy: 8 November, 13:06 1:144
Decals are on the little F-20.
I will give it a clear next and look at exhaust area.
Projekt: CC Lee F-20 Tiger shark 1:144
20 15 October, 12:22
Mr D
Thanks Robert 😁👍
I've built few of these little guy,s there nice n easy n refreshing after bigger builds.
Thanks Robert 😁👍
I've built few of these little guy,s there nice n easy n refreshing after bigger builds.
15 October, 16:58
Skyhiker
I think you should do the factory test model red AND the conservative grey scheme! They are both cool. Heck maybe you should do 20 or 30 of these little suckers. That would be fun.
I think you should do the factory test model red AND the conservative grey scheme! They are both cool. Heck maybe you should do 20 or 30 of these little suckers. That would be fun.
26 October, 20:08
Mr D
Hi Skyhiker 👋
Thanks.... the red looks smart, quite a few weapons to paint up too.. going to need my magnifying visor.
I have the German F4 phantom and the hornet lined up in the stash 🤣
Hi Skyhiker 👋
Thanks.... the red looks smart, quite a few weapons to paint up too.. going to need my magnifying visor.
I have the German F4 phantom and the hornet lined up in the stash 🤣
26 October, 23:26
Mr D
Thanks Edouard 👍
I noticed you have the Airfix Tomahawk on order?
That's a really nice kit to build ...goes together well , the back wheel n control stick are bit fragile! So be careful.
Thanks Edouard 👍
I noticed you have the Airfix Tomahawk on order?
That's a really nice kit to build ...goes together well , the back wheel n control stick are bit fragile! So be careful.
26 October, 23:34
Mr D
Thanks Guy 😁👍
The little 1:144 good for saving room 🤣.
I would like to do full size Starfighter at some point .
Thanks Guy 😁👍
The little 1:144 good for saving room 🤣.
I would like to do full size Starfighter at some point .
27 October, 16:10
Ben M
Hahaha! I have a "full size" starfighter coming up too. It's such a beautiful aircraft.
Hahaha! I have a "full size" starfighter coming up too. It's such a beautiful aircraft.
27 October, 16:12
Mr D
Thanks Gorby Appreciate it....there my little fill-in substitutes ....till l get round to 1:48
Definitely want to do a Starfighter in larger scale.
Good luck with your projects 👍
Thanks Gorby Appreciate it....there my little fill-in substitutes ....till l get round to 1:48
Definitely want to do a Starfighter in larger scale.
Good luck with your projects 👍
28 October, 11:32
Andrzej Rygiel
I like to do 144th scale minis in between some bigger scale models and your Tigershark is an eye-catcher, it will really stand out in this bright livery! Gives me some ideas for my next builds 😉
I like to do 144th scale minis in between some bigger scale models and your Tigershark is an eye-catcher, it will really stand out in this bright livery! Gives me some ideas for my next builds 😉
5 November, 20:44
Mr D
Hi Andrzej.
Thanks 👍 yes they are nice to do now n then between or after bigger builds.
Yes it's a nice bright red, the Northrop factory colour.
Good luck with your projects 👍👍
Hi Andrzej.
Thanks 👍 yes they are nice to do now n then between or after bigger builds.
Yes it's a nice bright red, the Northrop factory colour.
Good luck with your projects 👍👍
5 November, 21:32
Mr D
Thanks for the Likes everyone 😀👍
Nice quick easy little build, the paints are AK Intense acrylic.
Thanks for the Likes everyone 😀👍
Nice quick easy little build, the paints are AK Intense acrylic.
7 November, 11:09
Mr D
Hi Miguel 👋, thanks ... appreciate it.
This one was moulded quite good, l had to build up the bottom intake on one side a little, but l think that was me not fitting the part level.
I have an F-4 phantom from this range in the stash, l managed to get so 144 German decals for it ....they cost more than the kit 🙄🤣.
Hi Miguel 👋, thanks ... appreciate it.
This one was moulded quite good, l had to build up the bottom intake on one side a little, but l think that was me not fitting the part level.
I have an F-4 phantom from this range in the stash, l managed to get so 144 German decals for it ....they cost more than the kit 🙄🤣.
7 November, 19:52
Miguel Vaquero
Well I'm really hoping to see more of your 144 work because it's impressive. And as for the F4 decals, well, spending money is the biggest part of this hobby 🤣🤣
Well I'm really hoping to see more of your 144 work because it's impressive. And as for the F4 decals, well, spending money is the biggest part of this hobby 🤣🤣
7 November, 19:58
Rene Brix
markerade denna artikel som säljbar / sellable
markerade denna artikel som säljbar / sellable
Armament for Soviet tank T-72M1 and T-64A/B:
125 mm 2A46M gun barrel fit to Tamiya / Trumpeter / Zvezda / Das Werk Aber 1:35
35L148 (35L-148) 2018 Nytt verktyg Multi ämne (2)8 November, 13:05
Vincenzo Fattori
äger denna artikel
äger denna artikel
German Army
8Ton Half Track Quadruple 20m/mAA. Sd.Kfz.7/1Hasegawa/Hales 1:72
MB-014 (Mini Box 14) 197y Ny låda 8 November, 13:02
/sv/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sv
35
35
/sv/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo