F6F-5N - Work in progress
Kommentarer
22 5 December 2023, 21:32
![](/profiles/img/134400-509-s.jpg)
With the Clarktor only pending weathering I started working with the engine, pretty much ready for priming after some more clean-up. The volors Trumpeter is suggesting for the engine seems to be quite different to what can be found online, hence I will go with the coloring found online.
18 December 2023, 19:13
![](/profiles/img/134400-509-s.jpg)
Priming both the engine and cockpit with AK 471 Extreme Metal primer followed by AK 479 Aluminium.
Some Vallejo masking fluid on chosen spots in the cockpit and other suitable spots before the interior green top-coat. Then some chipping…
Any ideas on what would be the best option for the engine gear-box in Tamiya? Should be Engine Gray (FS 16076), according to a few convension tables Tamiya option would be XF-63 German Gray. In my eyes it's too dark and not blue enough 🤔
19 December 2023, 18:10
![](/profiles/img/134400-509-s.jpg)
Interior primed with Vallejo black primer. Tomorrow I might have time to put the top-coat on the internals. Cockpit interior green (XF3 & XF5 1:1) and non-sunlightexposed parts with XF4 (Yellow Green).
22 December 2023, 18:25
![](/profiles/img/60714-348-s.jpg)
Looks great so far! I like the yellow/orange finish on the tractor! Very nice!
23 December 2023, 13:31
![](/profiles/img/134400-509-s.jpg)
Interior painted with a 1:1 mix of Tamiya XF-3 (Yellow) and XF-5 (Green). Engine parts with flat light blue, the color is close enough to what I wanted.
Interior and engine parts chipped with Vallejo masking fluid, came out ok.
23 December 2023, 13:32
![](/profiles/img/134400-509-s.jpg)
@Desert, the color on the Clarktor is really nice. I think I made a mix of 4 parts Tamiya Lemon Yellow and one part Orange.
23 December 2023, 13:35
![](/profiles/img/60714-348-s.jpg)
I agree that online sources for painting seem better than the Trumpeter suggestions.
23 December 2023, 13:36
![](/profiles/img/134400-509-s.jpg)
Thanks @Palo 🙏🏻 The cockpit is pretty much ready for some panel liner, ois etc to make it look properly used.
23 December 2023, 23:11
![](/profiles/img/134400-509-s.jpg)
@Desert. The chipping came out ok, maybe a bit too much in some places. Now I have a dilemma on the fuselage… Should I go with marbeling as I planned, or should I go with aluminium base and chipping 🤔
24 December 2023, 07:34
![](/profiles/img/60714-348-s.jpg)
Tough call. I think that the combination of dirt/exhaust but some chipping is probably best. The planes were pretty dirty and worn, but not to the point of appearing unserviceable. I like to imagine how many sorties the aircraft may have flown over a given combat cruise...
24 December 2023, 22:17
![](/profiles/img/134400-509-s.jpg)
Engine and exhaust parts painted dark iron and bombs and tips of the rockets olive drab.
27 December 2023, 13:26
![](/profiles/img/134400-509-s.jpg)
@Desert, decided to go with chipping for the exterior. Looking at pictures of well served Hellcats the chipping becomes mandatory 🙂 They really look "well used" and worn in most pictures
27 December 2023, 14:58