Vägg
Wall
Roger Blanc
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
2 bilder
De Havilland Mosquito MK IVNy: 19 November, 03:23 1:32
Projekt: De Haviland Mosquito, Revell, 1:32
Scratchbuilt
19 November, 03:15
October 24, 2024
Roger Blanc
äger denna artikel
äger denna artikel
Nakajima B5N2 Type 97 Carrier Attack Bomber "Kate" w/ Full interior
Border Model 1:35
BF-005 2023 Nytt verktyg 24 October, 20:40
October 21, 2024
Roger Blanc
lade till ett nytt projekt.
lade till ett nytt projekt.
All comments (6) » 5 18 August, 13:47
Roger Blanc
I would not say it's a Junk Model, rather that it must be build in a different way. I have 2 of this Eduard Kits yet plus a 1:32 Kit from Hasegawa, And it will not change the target to build the whole squadron 😃
I would not say it's a Junk Model, rather that it must be build in a different way. I have 2 of this Eduard Kits yet plus a 1:32 Kit from Hasegawa, And it will not change the target to build the whole squadron 😃
21 October, 10:56
October 8, 2024
September 6, 2024
August 27, 2024
August 18, 2024
August 3, 2024
June 5, 2024
Roger Blanc
lade till ett nytt projekt.
lade till ett nytt projekt.
14 March, 21:43
Roger Blanc
Interim conclusion after mounting of the cockpit: The fit of the fuselage parts, mounting of cockpit and rear wheel is pretty good. Compared with the Revell Me 262 1:48 Kit, much better. Airfix 1 - Revell 0
Interim conclusion after mounting of the cockpit: The fit of the fuselage parts, mounting of cockpit and rear wheel is pretty good. Compared with the Revell Me 262 1:48 Kit, much better. Airfix 1 - Revell 0
6 April, 06:35
Roger Blanc
The model is looking a little bit weird. A Corsair with New Zealand markings is looking a little bit surprising. An angry surprise at the end was the fitting of the canopy. For me, it seemed that it was not a regular part of the kit.
The model is looking a little bit weird. A Corsair with New Zealand markings is looking a little bit surprising. An angry surprise at the end was the fitting of the canopy. For me, it seemed that it was not a regular part of the kit.
5 June, 11:51
March 23, 2024
Roger Blanc
lade till ett nytt fotoalbum.
lade till ett nytt fotoalbum.
13 bilder
Lippisch 13a1:48
Base with Mr Hobby Surfacer 1500 black ….
Projekt: Restauration Lippisch P13a
3 26 February, 20:32
Roger Blanc
Finished!
Test with chipping fluid failed. Masking Tapes are ripping off additional Color Layers very easy over chipping fluid layers.
Decals from Eagle Strike are pretty good. 14 Years old but still working well.
Washing failed. Too less Color in the wash
Finished!
Test with chipping fluid failed. Masking Tapes are ripping off additional Color Layers very easy over chipping fluid layers.
Decals from Eagle Strike are pretty good. 14 Years old but still working well.
Washing failed. Too less Color in the wash
23 March, 20:23
March 18, 2024
March 16, 2024
March 14, 2024
March 9, 2024
Roger Blanc
lade till ett nytt projekt.
lade till ett nytt projekt.
26 February, 14:20
Roger Blanc
There is now an addional Testrequirement. My son in law bought a cutting plotter for making his own airbrush stencils. He will make some for the Insignias, let's see what happens.
There is now an addional Testrequirement. My son in law bought a cutting plotter for making his own airbrush stencils. He will make some for the Insignias, let's see what happens.
9 March, 13:55
February 26, 2024
Roger Blanc
lade till ett nytt projekt.
lade till ett nytt projekt.
2 16 October 2023, 16:29
Roger Blanc
Saw in a YouTube video a construction report with engraving missing turrets. Started now with it between the drying phases of my Apollo project
Saw in a YouTube video a construction report with engraving missing turrets. Started now with it between the drying phases of my Apollo project
16 October 2023, 16:55
Roger Blanc
Of course the meaning is: rivets, not turrets. Now made black surface an then aluminum, two layers. I will now polish it, let's see what happens.
Of course the meaning is: rivets, not turrets. Now made black surface an then aluminum, two layers. I will now polish it, let's see what happens.
25 December 2023, 11:57
Roger Blanc
Now, canopy is mounted. The only thing which has to be finished are the propeller. I'm happy that it didn't became a tailsitter.
The nearer the end, the more conflicting am I with this model. There are really cool things on it I made not bad. Cockpit, Canopy, the metal look, rivets.
On the other side, an aluminum look plane with Invasion stripes? … I don't know, I hoped it will look cooler. The wheathering, not really bad but also not so amazing.
The big picture is a little bit restless…
Let's see what happens on the home stretch…
Now, canopy is mounted. The only thing which has to be finished are the propeller. I'm happy that it didn't became a tailsitter.
The nearer the end, the more conflicting am I with this model. There are really cool things on it I made not bad. Cockpit, Canopy, the metal look, rivets.
On the other side, an aluminum look plane with Invasion stripes? … I don't know, I hoped it will look cooler. The wheathering, not really bad but also not so amazing.
The big picture is a little bit restless…
Let's see what happens on the home stretch…
19 February, 22:35
Roger Blanc
Now finished! As mentioned above, for me there are two sides of the coin. The cool things are:
Rivet Wheel, a modell will be looking so much cooler with rivets. Even it's such a simple Kit like this. ->strongly recommended!
Eduard decals after 30.6,2020, on which you can peel off the transport film after mounting. But be careful! You must wait 1200 hours at minimum, and then you must handle with care veeery careful!
AK Interactive extreme Metal, Aluminum product line. Very easy for use, I used them without thinner in the Airbrush.
The not so cool things are:
The look itself, a Lightning, aluminum edition with invasion stripes is not a burner. I think that's the reason why there are not much of them made as model.
The kit itself. Quite simple, not very detailed.But hey! I payed only 16.- sFr ( 18.- $, 17 € ) for it, no critics from my side about this.
It was planned as a further Test model, only for testing aluminum look. But there were more and more test requirements appearing like, the new Hansa airbrush testing, what about Mr Hobby surfacer, what about new masking tape, how about the rivet whel part two, the Eduard decals, and so on, bla bla bla...
It's similar like in the Forest Gump movie when he opens the chocolate box. If I open a kit box, I know what's in it, but I don't know what's gonna happen.
Now finished! As mentioned above, for me there are two sides of the coin. The cool things are:
Rivet Wheel, a modell will be looking so much cooler with rivets. Even it's such a simple Kit like this. ->strongly recommended!
Eduard decals after 30.6,2020, on which you can peel off the transport film after mounting. But be careful! You must wait 1200 hours at minimum, and then you must handle with care veeery careful!
AK Interactive extreme Metal, Aluminum product line. Very easy for use, I used them without thinner in the Airbrush.
The not so cool things are:
The look itself, a Lightning, aluminum edition with invasion stripes is not a burner. I think that's the reason why there are not much of them made as model.
The kit itself. Quite simple, not very detailed.But hey! I payed only 16.- sFr ( 18.- $, 17 € ) for it, no critics from my side about this.
It was planned as a further Test model, only for testing aluminum look. But there were more and more test requirements appearing like, the new Hansa airbrush testing, what about Mr Hobby surfacer, what about new masking tape, how about the rivet whel part two, the Eduard decals, and so on, bla bla bla...
It's similar like in the Forest Gump movie when he opens the chocolate box. If I open a kit box, I know what's in it, but I don't know what's gonna happen.
26 February, 09:41
February 6, 2024
December 13, 2023
December 10, 2023
November 28, 2023
Roger Blanc
lade till ett nytt projekt.
lade till ett nytt projekt.
3 5 June 2023, 18:04
Roger Blanc
The command module isfinished. Now the rocket part is ongoing. Learned a lot of metal finish.
But it's strange, I like it, but I don't love it….
The command module isfinished. Now the rocket part is ongoing. Learned a lot of metal finish.
But it's strange, I like it, but I don't love it….
9 November 2023, 09:50
Roger Blanc
Finished! I learned a lot during the construction. As I said, I like the model, but I don't love it.The model will be cool if you buy and install the add-on kit. Out of the box, it's actually not detailed enough. The accuracy of fit is weak for some parts. Especially with the transparent parts, it quickly looks sloppy if they don't fit exactly. It still looks impressive when fully built, even if I didn't succeed so well.
Finished! I learned a lot during the construction. As I said, I like the model, but I don't love it.The model will be cool if you buy and install the add-on kit. Out of the box, it's actually not detailed enough. The accuracy of fit is weak for some parts. Especially with the transparent parts, it quickly looks sloppy if they don't fit exactly. It still looks impressive when fully built, even if I didn't succeed so well.
28 November 2023, 21:04
wnolder.php?lang=sv
2023-11-28 21:04:52
2014-08-14 08:20:44
16189
/ajax/wnolder.php?lang=sv&sd=2023-11-28 21:04:52&md=2014-08-14 08:20:44&filter=&w=16189
todo