A US Hellcat
![Album image #1 Album image #1](/albums/img/6/6/8/777668-15547-28-720.jpg)
The construction has begun. The usual start with the cockpit. Everything fits nicely.
![Album image #2 Album image #2](/albums/img/6/6/9/777669-15547-59-720.jpg)
Testing the fit of the RB seatbelts
![Album image #3 Album image #3](/albums/img/6/7/0/777670-15547-86-720.jpg)
One of the smallest parts I've ever used on a 1/24 model: the buckles of the seatbelts. Unfortunately I took me three buckles to discover that the the pin that goes inside the buckle, needed to be bent to fix them. But you won't notice it once inside the plane.
![Album image #4 Album image #4](/albums/img/6/7/2/777672-15547-44-720.jpg)
One piece of the belts, made of paper. It is tiny!
![Album image #5 Album image #5](/albums/img/6/7/3/777673-15547-36-720.jpg)
The lapbelts. If only the locking clasp would be move-able, the seatbelts would have functioned as if they were real.
![Album image #6 Album image #6](/albums/img/6/7/4/777674-15547-90-720.jpg)
A last picture of the cockpit bulkhead, without the seat.
![Album image #7 Album image #7](/albums/img/6/7/5/777675-15547-43-720.jpg)
The parachute really looks nice. The decals are made to look as if part of it is covered by the parachute harness,
![Album image #8 Album image #8](/albums/img/6/7/8/777678-15547-76-720.jpg)
One of he instrument panels, with very tiny decals. One of them is missing. I lost it somewhere in the process, but it was so small, I couldn't find it anymore.
![Album image #9 Album image #9](/albums/img/6/7/9/777679-15547-32-720.jpg)
The seat with seatbelts in place.
![Album image #10 Album image #10](/albums/img/6/8/0/777680-15547-32-720.jpg)
![Album image #11 Album image #11](/albums/img/6/8/1/777681-15547-92-720.jpg)
The front bulkhead in place
![Album image #12 Album image #12](/albums/img/6/8/2/777682-15547-41-720.jpg)
Some shots from the cockpit
![Album image #13 Album image #13](/albums/img/6/8/3/777683-15547-25-720.jpg)
Cockit showing the seatbelts
![Album image #14 Album image #14](/albums/img/6/8/4/777684-15547-47-720.jpg)
Close-up of the seat.
![Album image #15 Album image #15](/albums/img/5/9/5/781595-15547-39-720.jpg)
The cockpit glued to the fuselage. The fit is perfect!
![Album image #16 Album image #16](/albums/img/5/9/6/781596-15547-36-720.jpg)
In the rear fuselage there is a lot of detail, most of it will not be visible. 🙁
![Album image #17 Album image #17](/albums/img/2/9/8/783298-15547-45-720.jpg)
The fuselage halves went together well. Only a very tiny gap forward of the hatch on the underside, no problem at all.
![Album image #18 Album image #18](/albums/img/2/9/9/783299-15547-17-720.jpg)
I decided to use the original decals for the instruments and the look nice! Even the map isn't forgotten
![Album image #19 Album image #19](/albums/img/3/0/1/783301-15547-20-720.jpg)
And then I made a serious mistake: I glued one of the bulkheads upside down. I was trying to add the tripod shape and it didn't fit.
![Album image #20 Album image #20](/albums/img/3/0/2/783302-15547-20-720.jpg)
After turning the bulkhead, the tripod easily slipped in place!
![Album image #21 Album image #21](/albums/img/3/0/0/783300-15547-48-720.jpg)
The result of a day's work. I'm very satisfied with it. Everytime, I'm surprised by the perfect fit of all the pieces. Sometimes you wonder how pieces will go together and suddenly they fall in place!
![Album image #22 Album image #22](/albums/img/3/0/9/806309-15547-75-720.jpg)
The gun bay assembled
![Album image #23 Album image #23](/albums/img/3/1/1/806311-15547-24-720.jpg)
The wings put together
![Album image #24 Album image #24](/albums/img/3/1/2/806312-15547-76-720.jpg)
Wings mated with the fuselage. Again I discovered I had a small misalignment in an earlier stage and this meant a bit more work to get them together.
![Album image #25 Album image #25](/albums/img/3/1/4/806314-15547-71-720.jpg)
Top view of the kit, I already used some primer.
![Album image #26 Album image #26](/albums/img/3/1/3/806313-15547-17-720.jpg)
Rudder and elevator. even the trim tab is movable
![Album image #27 Album image #27](/albums/img/3/1/5/806315-15547-28-720.jpg)
The parts of the engine. They fit together perfectly without glue. Only added a little glue to make sure they stay in place.
![Album image #28 Album image #28](/albums/img/3/1/6/806316-15547-16-720.jpg)
The engine with ignition cables made of copperwire.
![Album image #29 Album image #29](/albums/img/3/1/7/806317-15547-79-720.jpg)
The engine with ignition harness
![Album image #30 Album image #30](/albums/img/3/0/8/806308-15547-95-720.jpg)
Some extra parts added to the engine.
![Album image #31 Album image #31](/albums/img/3/1/0/806310-15547-26-720.jpg)
The intakes and the first of the exhaust in place. It is not easy to get everything in place. The ignition wires sometimes prevent the proper fit of the intakes and exhausts. But by trial and error, they slip in place
![Album image #32 Album image #32](/albums/img/0/2/9/811029-15547-80-720.jpg)
Fitting some more parts, testing if the exhausts fit.
![Album image #33 Album image #33](/albums/img/0/2/8/811028-15547-15-720.jpg)
All exhausts in place. It is a tight fit, so the paint got damaged and needs touching up.
![Album image #34 Album image #34](/albums/img/0/2/1/811021-15547-52-720.jpg)
All parts fitted to the rear of the engine, including the intake ducts.
![Album image #35 Album image #35](/albums/img/0/2/3/811023-15547-38-720.jpg)
A rear view of the engine.
![Album image #36 Album image #36](/albums/img/0/2/4/811024-15547-52-720.jpg)
Front view of the engine with all the ignition wires
![Album image #37 Album image #37](/albums/img/0/2/5/811025-15547-84-720.jpg)
Test fitting the engine
![Album image #38 Album image #38](/albums/img/0/2/7/811027-15547-17-720.jpg)
The other side of the engine.
![Album image #39 Album image #39](/albums/img/0/2/2/811022-15547-42-720.jpg)
It's beginning to look like a real plane.
![Album image #40 Album image #40](/albums/img/0/2/6/811026-15547-46-720.jpg)
And this is all there will be visible of the engine, once the plane is finished. This plane will be fully closed up, hiding most of the engine. But my second cat will be fully opened up, with wings folded so I used this first engine to find out what would likely cause problems in the build, and it was helpful!
![Album image #41 Album image #41](/albums/img/3/4/6/813346-15547-11-720.jpg)
Starting to close the panels and hiding away the beautiful engine! But the second one will be better with more details and all possible panels opened up.
![Album image #42 Album image #42](/albums/img/3/4/7/813347-15547-85-720.jpg)
These panels fit nicely.
![Album image #43 Album image #43](/albums/img/3/4/8/813348-15547-40-720.jpg)
The impressive mouth needs a bit more attention
![Album image #44 Album image #44](/albums/img/3/4/9/813349-15547-92-720.jpg)
And then suddenly there was a problem. For some reason the air-intake doesn't fit as it should, leaving a gap between the panels. It's only at the underside of the aircraft and if necessary, I can always remove the intake, as it won't be visible anymore.
![Album image #45 Album image #45](/albums/img/5/9/6/945596-15547-63-720.jpg)
A last glimpse of the engine of this cat. Since I want to build two different cats, this one will be almost fully covered up, while the British one will show everything. But it was nice to build this as complete as possible in order to learn from the mistakes I made
![Album image #46 Album image #46](/albums/img/5/9/5/945595-15547-32-720.jpg)
Engine covers in place. I had to remove some parts of the air-intake to make the covers fit. Again proof that the new Airfix models don't tolerate mistakes
![Album image #47 Album image #47](/albums/img/5/9/7/945597-15547-37-720.jpg)
Inside flaps installed
![Album image #48 Album image #48](/albums/img/5/9/8/945598-15547-16-720.jpg)
All flaps ready
![Album image #49 Album image #49](/albums/img/5/9/9/945599-15547-94-720.jpg)
She is beginning to look good!
![Album image #50 Album image #50](/albums/img/6/0/1/945601-15547-35-720.jpg)
First time on her legs. I didn't glue them yet, since I think it's easier to fit them in the end
![Album image #51 Album image #51](/albums/img/5/9/4/945594-15547-57-720.jpg)
First decals applied. Makes her really look great. I discovered I made a stupid mistake. For the first time I used masks for the inside and the outside of the canopy. After painting, I removed the inside masks and yesterday I wanted to remove the outside masks, only to find out I never used them! Fortunately a bit of alcohol removed the paint and this time I made sure I used both sets of masks!
![Album image #52 Album image #52](/albums/img/7/1/3/958713-15547-48-720.jpg)
And she's ready for take-off!
(An airbrush provides the necessary headwind)
(An airbrush provides the necessary headwind)
![Album image #53 Album image #53](/albums/img/7/1/4/958714-15547-33-720.jpg)
View from starboard. One gunbay opened
![Album image #54 Album image #54](/albums/img/7/1/5/958715-15547-32-720.jpg)
Top view
![Album image #55 Album image #55](/albums/img/7/1/6/958716-15547-87-720.jpg)
Close-up of the canopy
![Album image #56 Album image #56](/albums/img/7/1/7/958717-15547-28-720.jpg)
gunbay
![Album image #57 Album image #57](/albums/img/7/1/8/958718-15547-10-720.jpg)
Pilot's domain
![Album image #58 Album image #58](/albums/img/7/2/0/958720-15547-88-720.jpg)
Cockpit inside
Kommentarer
11 24 May 2020, 19:40