P-47D Thunderbolt
Kommentarer
46 28 May 2021, 21:09
![](/profiles/img/67454-318-s.png)
Superb detail inside and out. Can't wait to see how this one turns out.
8 June 2021, 15:11
![](/profiles/img/21096-573-s.jpg)
very nice details. shiny job outside 🙂 what metal paint did you use?
26 September 2021, 21:28
![](/profiles/img/67551-689-s.jpg)
Thanks @Spanjaard
Used AK's Xtreme Metal - Polished Aluminium for the outside
27 September 2021, 06:39
![](/profiles/img/48665-446-s.jpg)
Very nice pit & engine and the shiny coat too! 👍 the surface had to be in pristine condition for this level of mirror-polish!
27 September 2021, 10:54
![](/profiles/img/67551-689-s.jpg)
Thanks for the feedback guys
@Slavo - to be honest it's my first kit that I'm going for a NMF. Gave it a first try last week but the end result was a dull silver finish with the same paint, my fault as i used a mr surfacer as primer…so i stripped it off completely, polished the surface all over and went for a glossy black primer the second time round polishing the primer before final finish.
Happier with the end result though i know there is room for much improvement and learnt quite a lot from this build, particularly with regards to surface prep when going for this kind of finish 🙂
27 September 2021, 17:21
![](/profiles/img/67551-689-s.jpg)
@FlightLine - AK are my go to nowadays…i find them forgiving and very durable, although with this specific finish have to be careful with handling. As primer, i used the same AKs black primer gloss primer, though any other glossy finish should work.
9 October 2021, 06:57
![](/profiles/img/48972-166-s.jpg)
Fantastic shine! I am a little late, but from now on I will follow with pleasure and interest. Good work so far!
5 November 2021, 19:45
![](/profiles/img/user-s.jpg)
Beautiful so far. I'm on. Question: shouldn't the inside of the engine cowling be zinc chromate?
6 November 2021, 09:37
![](/profiles/img/67551-689-s.jpg)
Thank you your kind comments Karl, Robert, Guy, Ben & Michael!!
@Michael - that was my initial impression and what the instructions say, however following some research it seems the engine cowl was left bare metal, and it tended to change a bit colour due to engine heat.
Progressing with decals at the moment and uploaded some photos with further updates.
6 November 2021, 18:41
![](/profiles/img/33854-496-s.jpg)
I've been watching this come together and I am very impressed the paint brilliance. Now that the markings are going on it's even better. Watching with anticipation as to what the weathering will bring. 👍
6 November 2021, 19:14
![](/profiles/img/67551-689-s.jpg)
Many thanks for your comments guys!
@Tom - I used AK's Xtreme Metal range - similar but gives more coverage and feels more durable although the Polished Aluminium was fighting me along the way
22 November 2021, 21:23