1/72 Amodel Beechcraft 1900C - Dads Model

1
January 26, 2022
First I tested the fit of the fuselage.
2
January 26, 2022
I slotted the wings in for a test fit.
3
January 26, 2022
Another angle.
4
January 26, 2022
I found a set of pilot figures as my Dad likes to have them in all his models.
5
January 26, 2022
Here's a size comparison to the Heron and Twin Otter.
6
January 26, 2022
I'm pleased with the result so far.
7
January 26, 2022
And she's ready to prime!
Sand paint the internals obviously......
8
February 1, 2022
Cockpit interior and components aswell as the interior fuselage have all now been airbrushed.
I chose black to avoid anything being seen in the empty cargo bay.
9
February 4, 2022
The cockpit tob is what is "needed" but I decided to add more detail as you'll see in another photo.
10
February 4, 2022
Not a bad cockpit really considering its a short run kit.
11
February 4, 2022
I hate painting figures as I'm not very good at it bid I am pleased with these.
12
February 4, 2022
I tried to make checklists on the yokes out of masking tape, I like them!
13
February 4, 2022
I'd make alot of money if I was to charge for weight in this one!
14
February 4, 2022
Pilots look good on their forever home.
15
February 4, 2022
Engines are fixed in place!
16
February 8, 2022
Fuselage filled
17
February 8, 2022
Fuselage sanded
18
February 23, 2022
Wings filled and sanded and wings glued yo the main fuselage.
19
March 12, 2022
Glass is now in place ready try out some Mr Surfacer.
20
May 10, 2022
I had issues purchasing Filler so I took off the cockpit glass and adjusted accordingly and it fits nicely now!

Kommentarer

13 26 January 2022, 02:31

Chris Parsons
Great work! I've built these, really enjoyed them!
Keep up the great job

4 February 2022, 14:51

Gordon Sørensen
Looking forwarden watching your progress. This is one of the kits on my 'wishlist'…

4 February 2022, 16:18

Mirko Römer
Enough seats left, I'm in.

4 February 2022, 18:12

Tony Stark
Thanks everyone!

23 February 2022, 08:12

Hajo Lippke
When are you going to add the cabin windows? I remember building Amodel-kits (the PC-12 and the Learjet) where the clear parts didn´t sit flush with the fuselage, but could be sanded and then polished and finally looked good...

12 March 2022, 10:30

Tony Stark
I'll be adding the cabin windows last, my plan is to fix them in place with Microscale Kristal Klear and in hheory that should sort the issue out.

13 March 2022, 14:40

Project info

1/72 Amodel Beechcraft 1900C - Dads Model

20 bilder

1:72

Pågående

All albums

View all albums »