Old Warbird
1May 21, 2023Started with the cockpit and the seat.
2May 21, 2023The walls of the cockpit had nice detail for what I am used to.
3May 21, 2023The floorboard of the cockpit.
4May 21, 2023Wonderful detail on this body. I love Accurate Miniatures molds.
5May 21, 2023This bird is going to be wheels up so I glued the wheel wells shut.
6May 21, 2023I've never had to glue fins to bombs before! Tweezers where a must.
7May 21, 2023Here's my paint brew for the interior colors.
8May 21, 2023Floor board painted.
9May 21, 2023Yoke painted
10May 21, 2023Interior shell painted.
11May 21, 2023The radio's batteries?
12May 21, 2023The radio and O2 cannister.
13May 21, 2023Floor board with details.
14May 21, 2023Detail painting on the wall controls.
15May 21, 2023The seat was blah and I wanted to try making my own belts. I planned on using this A-36 as a dry run for another model. This bird is in the air so it has a pilot. Most of the these details won't be seen.
16May 21, 2023I designed belts using Corel Draw and printed them on my printer. I made plenty of copies, it's only 1 sheet of paper!
17May 21, 2023Cut out the belts and begin assembly. I used CA Glue.
18May 21, 2023Belts on the seat.
19May 21, 2023Never had a gauge panel like this. I just followed the instructions...
20May 21, 2023Per the instructions I painted all the metal surfaces with black.
21May 21, 2023A decal placed on the back side of the gauge panel and lines up very well with the clear lenses.
22May 21, 2023Fuselage coming together.
23May 21, 2023Those details look nice!
24May 21, 2023One last glory shot of the interior details.
25May 21, 2023Tail wheel is up for flight but the kit's part is not meant to seal up this well. I cut styrene and scored it to fit the area.
26May 21, 2023I was surprised at how well the body came together. The wings are in two halves, the body is in two halves but it worked pretty well. I had some gaps to fill but nothing to cry about.
27May 21, 2023The body is together. A beautiful silhouette!
28May 21, 2023Panel lines... I hate panel lines. I need a tool for this I think!
29May 21, 2023The plane needs a pilot! None in the kit so I had to whip something up. Another pilot from a Revell kit, at the same scale, was to tall so I had to get creative. Forgive me little dude!
30May 21, 2023That's a good height now!
31May 21, 2023His hand wasn't on the yoke and this bird was going to flying real low so I felt like I had to make it real. This project needs another sacrifice!
32May 21, 2023The Frankenstein pilot!
33May 21, 2023That's good fit!
34May 21, 2023Time for paint, tried to do a glaze technique.
35May 21, 2023He looks serious!
36May 21, 2023Placed in the cockpit, Cpt. Frankenstein is ready for canopy
37May 21, 2023
38May 21, 2023I
39May 21, 2023I used tacky to hold stuff while I apply the clear panels.
40May 21, 2023Once the canop
41May 21, 2023
42May 21, 2023
43May 21, 2023
44May 21, 2023
45May 21, 2023
46May 21, 2023
47May 21, 2023I'm diggin' how the wings came out.
48May 21, 2023I'm diggin' how the wings came out.
49May 21, 2023Time for sponge chipping. I need more practice with this. I used Tamiya Flat Aluminum.
50May 21, 2023Chipping
51May 21, 2023Chipping
52May 21, 2023The chink in this kit's armor are the decals. Almost un-usable, almost.
53May 21, 2023Every decal broke in the water while it was soaking. I tried warm water, I tried holding the decal to it's shape. They did not care, they just broke.
54May 21, 2023Perseverance!
55May 21, 2023I should have stopped here with the yellow stripes. No way they would sink into the vents on the wings but I tried, because I can be stubborn.
56May 21, 2023There it is. Doing what I thought it would do, covering those beautiful molded vents.
57May 21, 2023Pulled em' off! This began a comedy of errors...
58May 21, 2023The roundles and bombs on the fuselage. Quick note, every single bomb represents a sortie the real plane flew. Quite the mission list it must have...
59May 21, 2023Decals are all on! now on to the stripes. What a mission, I should get my own bomb decal for this sortie!
60May 21, 2023I thought: "I'll just mask off the plane, prime the area and then follow with yellow.
61May 21, 2023The model gods got angry, my primer reacted with the gloss clear I used.
62May 21, 2023I was under a time crunch and I didn't want to strip the whole wing. Sooo, I striped the area with rubbing alcohol. It cuts right through the gloss clear I used.
63May 21, 2023I then waited a day, because I was spooked about how it would look. I then stripped the mask off, re-masked it slightly bigger so the yellow would cover the messy line left from the stripping. I primed with Tamiya white, then shot Tamiya yellow. The model gods were appeased.
64May 21, 2023I had the same issue on the tail, took the same process as the wings.
65May 21, 2023Some bleed through on this side. That's ok I can work with it.
66May 21, 2023Oil wash for the panel lines and rivets and stuff.
67May 21, 2023The plane was re-glossed and the oil wash was applied.
68May 21, 2023oil wash on the wings. I let it dry for a couple of days. Oil's take forever to dry.
69May 21, 2023Then the plane was shot with matte clear, to dull everything down and seal the details in.
70May 21, 2023
71May 21, 2023
72May 21, 2023
73May 21, 2023
74May 21, 2023
75May 21, 2023
76May 21, 2023
77May 21, 2023Thank you so much for taking the time to look at this album!
Kommentarer
13 21 May 2023, 02:28
Jennifer FranklinVery nice work, I love the pilot, did he come with the model or did you add him yourself?
21 May 2023, 03:40
Album info
This is a model that was donated to my club by a modeler's family who passed away. The goal was to finish it for the local Flight 19 Model Show as part of a group build to honor the deceased modeler. I took the project seriously and finished 3 subjects from the same time period on time. This is the A-36's journey on my bench.
