Haber akışı
Stefan L.
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
37 Görüntüler
Panzerkampfwagen IV Ausf. HYeni: 20 October, 12:58 1:35
Added some dents to the fenders, especially the front ones always seemed to have some bending towards the outside, judgi...
proje: Panzerkampfwagen IV Ausf. H
27 31 October 2023, 12:56
Stefan L.
@Spanjaard thank you, I hope to achieve some nice rust variations at those dented spots
@Spanjaard thank you, I hope to achieve some nice rust variations at those dented spots
28 January, 21:26
John
You're doing a good job of adding all the details that Tamiya kits of this era lack. 👍
You're doing a good job of adding all the details that Tamiya kits of this era lack. 👍
17 August, 19:31
Alex Rakhimgulov
Very interesting and useful tips under each picture! Thank you! Really cool build!
Very interesting and useful tips under each picture! Thank you! Really cool build!
11 September, 09:19
Stefan L.
@Alex Rakhimgulov thank you alot for this comment! Appreciate it that you find those tips useful 🙂
@Alex Rakhimgulov thank you alot for this comment! Appreciate it that you find those tips useful 🙂
11 September, 11:26
Andor Tóth
Cool build! It was my very first 1/35 vehicle I built back in 1995 or so (at the age of 15). So nostalgic.
Cool build! It was my very first 1/35 vehicle I built back in 1995 or so (at the age of 15). So nostalgic.
4 October, 11:27
Stefan L.
@Andor Tóth oh wow, what a coincidence, hope you will like the end-result! 🙂
@Andor Tóth oh wow, what a coincidence, hope you will like the end-result! 🙂
4 October, 22:05
Lenny V
bu öğenin sahibi
bu öğenin sahibi
Road Wheels for Bussing-Nag 4500 (Late Pattern)
Panzer Art 1:35
RE35-247 20 October, 12:56
Chofo
bu öğenin sahibi
bu öğenin sahibi
DOUBLE-PIN TRACKS FOR T-72 & T-90 MAIN BATTLE TANKS (CEMENT-FREE WORKABLE TRACKS)
Meng Model 1:35
SPS-030 2016 Yeni kutu 20 October, 12:54
Nick Windt
bu öğenin sahibi
bu öğenin sahibi
Albatros D.V/D.Va Overtrees - Sprues only; no decals, instructions, mask or PE parts
Eduard 1:48
8113x 2021 Değiştirildi ??? 20 October, 12:53
Nils Steyaert
yeni bir proje ekledi.
yeni bir proje ekledi.
5 6 March, 17:56
Nils Steyaert
and im off, but its been a rocky start.
i was planning on adding some ejectionhandles to the bangseats, but they are to small and i just couldnt get them right. the tinwire im using just didnt want to get into shape. o i decided to drop that idea and just ad 2 pilot figures (from a set of cheap n-scale figures i got online).
also, im filming the whole thing to make a youtube inbox review and build video.
the first main change was the nose, the E-Model nose was removed and replaced with a more fitting nose, salvaged from an old 80's/90's Revell Tornado IDS kit.
and im off, but its been a rocky start.
i was planning on adding some ejectionhandles to the bangseats, but they are to small and i just couldnt get them right. the tinwire im using just didnt want to get into shape. o i decided to drop that idea and just ad 2 pilot figures (from a set of cheap n-scale figures i got online).
also, im filming the whole thing to make a youtube inbox review and build video.
the first main change was the nose, the E-Model nose was removed and replaced with a more fitting nose, salvaged from an old 80's/90's Revell Tornado IDS kit.
8 August, 21:15
Nils Steyaert
Update,
the pilot figures have been painted and added to the cockpit. i have scratchbuilt a new nosewheel legg, using 2mm styrene tube and a 1mm sewing needle (was stronger then the thin plastic). this is to give the aircraft a higher AoA for catapult launch (F-4K nose can extend by 40 inches, which in 1/144 is roughly 1cm). the canopy has been glued on with UV resin glue (transparent curing).
ive also salvaged some Skyflash and Sidewinder missiles from the sparesbox (leftovers from a pair of old Revell Gripens), i will be looking into scratchbuilding some launchrails for the inert pylons.
ive also added a Marconi RWR antenna on the tail.
so far, so good...
Update,
the pilot figures have been painted and added to the cockpit. i have scratchbuilt a new nosewheel legg, using 2mm styrene tube and a 1mm sewing needle (was stronger then the thin plastic). this is to give the aircraft a higher AoA for catapult launch (F-4K nose can extend by 40 inches, which in 1/144 is roughly 1cm). the canopy has been glued on with UV resin glue (transparent curing).
ive also salvaged some Skyflash and Sidewinder missiles from the sparesbox (leftovers from a pair of old Revell Gripens), i will be looking into scratchbuilding some launchrails for the inert pylons.
ive also added a Marconi RWR antenna on the tail.
so far, so good...
3 September, 09:21
Nils Steyaert
Update:
i just finished making the Spey engine exhaustcans, but i rran into a problem with the decals i had. the roundels on the decalsheet were either too small or too big. but i managed to source some correctly sized ones from a Revell 1/144 Hawker Hunter kit. ive also sourced some white bort number from a DACO 1/72 Mirage 5B and (R)F-84F decalsheets.
Update:
i just finished making the Spey engine exhaustcans, but i rran into a problem with the decals i had. the roundels on the decalsheet were either too small or too big. but i managed to source some correctly sized ones from a Revell 1/144 Hawker Hunter kit. ive also sourced some white bort number from a DACO 1/72 Mirage 5B and (R)F-84F decalsheets.
7 September, 18:56
Nils Steyaert
the build is going smoothly, today, i managed to airbrush the whole thing, starting with the white and grey colors on the Phantom.
the deck display is gonna need more sessions, but im satisfied with the results so far.
the build is going smoothly, today, i managed to airbrush the whole thing, starting with the white and grey colors on the Phantom.
the deck display is gonna need more sessions, but im satisfied with the results so far.
17 September, 13:07
Nils Steyaert
Update:
painting of the main model is largly completed, decals have been added and the whole thing has been sealed with a coat of Humbrol clear.
next step is to finish the whole thing with a matt-coat of varnish and then i can add the external loads (that still needs more paint).
its starting to come together quite nicely, the next few sessions will focus on the carrierdeck display stand.
Update:
painting of the main model is largly completed, decals have been added and the whole thing has been sealed with a coat of Humbrol clear.
next step is to finish the whole thing with a matt-coat of varnish and then i can add the external loads (that still needs more paint).
its starting to come together quite nicely, the next few sessions will focus on the carrierdeck display stand.
29 September, 14:11
Nils Steyaert
it took me a cople of sessions, but im caling this one completed.
had some problems with masking the deck display, but nothing that couldnt be fixed.
all in all, im quite satisfied with the results.
it took me a cople of sessions, but im caling this one completed.
had some problems with masking the deck display, but nothing that couldnt be fixed.
all in all, im quite satisfied with the results.
20 October, 12:53
Sebastian S.
bu öğenin sahibi
bu öğenin sahibi
Sd.Kfz.181 Panzerkampfwagen Tiger I Ausf.E (Late Production) D-Day 80th Anniversary
Italeri 1:35
6754 2024 Yeni çıkartmalar 20 October, 12:52
Nils Steyaert
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
10 8 August, 21:08
/tr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=tr
35
35
/tr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo