Haber akışı

Finn
Following

Dave Flitton
Watching

J35J
I'm in👍🏻

Cuajete
A classic old and hard kit from Łukasz... I can't miss it!

Patryk S.
Following! Is this build an indication and warning of an incoming Czapla build?😜 Greetings!

Maciej Bellos
Oh, gotta see this one!

Moreno Baruffini
Oh wow! Following!

Mr D
Nice 👍👍

Nicolas
Count me in as well.

Łukasz Gliński
Welcome everyone, glad to have you on board.
@Patryk: LOL, it is waiting in the stash indeed, but I'd like to train some tricks on Łoś and RWDs 6&8 first 😄

Andrzej Rygiel
Insert "I was there 3000 years ago" meme 😄 I got this as a souvenir from our family trip to Poland back in the 80's and finished it in one afternoon sitting straight after our return. I do not doubt you are going to make much better PZL.37 replica than I did back then...

Alec K
Ahh, I have this thing somewhere, in glorious blue. Watching, of course.

Ben M
👀 just what I like

Mr D
Nice to do a vintage kit... takes you back.
I remember doing the Matchbox Electric lightning ⚡ with my dad as a boy..
Good luck with everything 👍👍

Robert Podkoński
Somehow I missed that... taking a seat, of course! (I kinda "built" this kit three or four times as a kid...)

Łukasz Gliński
Welcome everyone, glad to see y'all here 👍
Say hello to the crew members awaitng varnish and washing.
Alec, I'm very jealous, I have failed to locate the turquoise one 😄
Andy&Rob - I sort of built at least two, no more I could remember, one has been lost 'flying' (in my hand) somewhere over my parents garden 😄
Andy - you're welcome 😄
[img1]

Mr D
Nice to see this one making a start.... nice project
Looking good 👍👍

Moreno Baruffini
Hello!!!! 😊

Zbynek Honzik
I built this Łoś kit about 35-40 years ago.
These are memories...
Good luck with the build Łukasz! 🍀👍

Cuajete
First steps. Great!

Alec K
Looks like a great progress on this one Łukasz 👍

Łukasz Gliński
Thank you mates - now you can behold the main colours. Each of them got a filter on top as I wasn't happy with the shades 😄

Moreno Baruffini
I think that you exactly catch the perfect colour for the livery! What colour did you used? I remember that ten years ago I tried to build a "Karas" and I discussed a lot with my Italian mates about the right shade... 😉

Łukasz Gliński
Ciao Moreno
I used the following colours: C010 Dark Polish Khaki, Hataka Hobby Orange Line Matt, Acrylic Lacquer, 17ml & C036 Light Blue-Grey, Hataka Hobby Orange Line Matt, Acrylic Lacquer, 17ml
However they didn't match my liking, the khaki being too brownish and the latter - neither light nor blue, just grey.
So I added a bit of filter on top using very thinned C084 Kaki Français, Hataka Hobby Orange Line Matt, Acrylic Lacquer, 17ml & C083 Gris Blue Clair, Hataka Hobby Orange Line Matt, Acrylic Lacquer, 17ml

Moreno Baruffini
Great! Thanks for the tip! Ciao!
Ps I'm a fan of the Hataka colours, I find them very good 👍🏼

Bas Tonn
Interesting... curious about the progress
Keep up the good work

Neuling
Good teamwork!

Danny Ray
This looks fantastic. I'm a bit jealous because I'm planning a build with a Sherman III (in British terms), Crusaders and Stuart's, Matilda's, etc (though maybe not all at once. I don't think 2nd El Alamein had ALL allied tanks fighting, from every era?)
Anyway, the build is for a tribute to my old grandad who co-drove Crusaders and Shermans. His unit was 10th Royal Hussars and if you see the markings and paint schemes they used, it's the most plain out of them all. No camo whatsoever. Also, rather than the yellow tinged sand/stone colour used by most, they used a brown (think it's RAL8000).
In order to be accurate I'll do it in the correct colours but I'd have liked to camo it up!
(By the way I'm very much a novice and it'll take me a long time to attempt this. I have over 40 kits to practice on though 😳😍😁🤓😂)

Scott Dutton
Don't worry about being a novice, just enjoy what you do, that way you improve

Danny Ray
Good advice Scott. Can you remember who made this kit? I'm having trouble deciding which one to go for. I'm contemplating plastic individual track links and using 0.2mm wire cut down as pins (no glue), so I guess that limits my choice? (By the way and I bet you get this a LOT. Isn't Dutton the name that Kevin Costner's family have in the show Yellowstone?. You ain't a Montana cattle baron, are you? 😃).

Danny Ray
Sorry. I saw the kit. It's a Dragon 6573. It doesn't have the correct Markings for my grandads memorial (10th Hussars, 2nd arm brig, 1st arm div) but they are available after market. I got some already actually from eBay. I don't suppose anyone here would know off the top of their heads if this type of Sherman fought at 2nd Alamein battle? It gets a bit confusing because Sherman III's were known as Sherman II's by the Brits. So I'm led to believe?

Danny Ray
Sorry for all the questions Scott but the aerials and pennants some use (like the 2 here), are they part of the kit or do you buy those separately? I've never seen them in any kit.

Jakko ‌
Aerials are easy to make from metal wire. I prefer 0.3 mm spring steel myself, which you can buy from model shops that cater to people who scratchbuild working models in metal, like those making ships, trains, steam engines, etc. The advantage of spring steel is that it will curve but not bend if you accidentally hit it, unlike brass or copper wire. Do use cutters suitable for it, though — it will ruin ones that aren't strong enough. Then just drill a hole slightly larger than the wire, as deep as you can, and superglue it in.

For the tracks, the MiniArt T41 or WE210 sets are probably the easiest choice if you want plastic ones. Slightly tricky to build, but not actually bad once you get the hang of it (and make a simple jig from some bits of wood). Stay away from Bronco, they will drive you crazy 🙁

T41 WORKABLE TRACK LINK SET (MiniArt 35322, 1:35)
WE210 Workable Track Link Set (MiniArt 35323, 1:35)

Danny Ray
Thanks Jakko. That's typical, I've just ordered some 0.3mm enamelled copper wire that I was planning on using as track link pins instead of the flimsy plastic ones that come with (I just bought a border models Crusader III for a planned memorial for my grandad, a co-driver on crusaders and shermans in 10th hussars in N Africa and Italy) a recent kit. These are the tracks I meant. Also as part of the memorial I was planning on getting a Dragon 6447 (the El Alamein one with magic tracks). They both employ these ridiculous plastic pins that are so thin they immediately bend , even if you manage to get them off the sprue intact! lol

Danny Ray
By the way Jakko. Can you buy the small penants they seemed to use so often in North Africa? I don't think I've seen them used elsewhere but they seemed to be everywhere in NA.

Danny Ray
Thing is, I'm a very, very green modeller. Built a few as a kid but only on my 4th build as an adult. The expensive Miniart and Border and Dragon kits will be done at a much later date once I've made lots of mistakes on cheaper ones. Also I'm still trying to get to terms with the airbrush I bought. Think I've bent the needle slightly already. I'm not the most practical person going but I really want to do a good job on this memorial build I'm planning with his medals and cap badges. His badges include one that has a WW1 male tank and the words "fear naught". They are great.

Jakko ‌
You could use the copper wire for aerials, too — just be careful you don't bend it. (OTOH, copper wire is also fairly easy to straighten if you do bend it 🙂)

As for the pennants, they were mainly a North Africa thing, AFAIK. They're easy enough to make yourself. Cut one from, say, aluminium kitchen foil, slightly longer than you need it to be. Wrap that extra length around the aerial, superglue it in place, and paint the pennant. (Best do this before adding the aerial to the model, though, as it will be much easier.)

For a Sherman kit, I would recommend the Asuka Sherman III over the Dragon one, really. I just don't like the way the Dragon Shermans go together, or the coarseness of a lot of their detail, but I do like the Asuka ones 🙂 Only thing is that this kit has the later style of suspension with the return rollers behind the bogies, unlike Scott's model, which has them on the top. If you've got photos of your grandfather's tank, though, you can probably check which kind his had.

Sherman III (ASUKA Model 35-017, 1:35)

Scott Dutton
Danny, Go the Asuka kit, much nicer.
Decals were from left overs and some aircraft ones and home made

Danny Ray
Thanks fellas. I think that sherman III was available during 2nd battle of el alamein. We brits called sherman III's sherman II's, i think. Unfortunately all photos of my grandads war were lost back in 1993. Im so glad i didnt buy tge dragon kit last night. Came very close!
Gonna get this today. Thank you both so much for your advice. Do you mind if i ask you both the odd question from time to time? Maybe i can add you both as 'scalemates'? 🙂

Danny Ray
By the way I think I already said but I already have some Sherman decals that were on a 10th hussars tank in NA and that was a major reason I was choosing the dragon kit, cos it has 10th hussars decals but it isn't a deal breaker cos I have them. They are a white rhino on a black pill shape and a white '67' on a red square and a blue circle with a '2' inside 🙂

Neuling
Top work! Everything just fine!

Marcel Klemmer
Thank you for sharing the pictures 👍

Shar Dipree
Thanks for sharing.

Steven Van Dyck
On this event we had our Warships installation and also I got some results in the contest. Essex and Mosasaurus won silver, Hancock and Cylon Raider bronze. Columbia was Highly Commended.

Alex K
Thanks for sharing and congrats on the wins! 👍

Hans-Jürgen Haag
Thanks for sharing!👍

Neuling
Thanks for sharing!

Neuling
Congrats!

Robert Podkoński
Cool! (and I love Blackadder series!)

Rui S
Brilliant 👍

Alberto
Your 3D paintings are amazing!

Paul Gallagher
Thanks Robert, Rui, Alberto. I enjoyed this one, even though I still don't really know what I'm doing when it comes to figures!

Neuling
Cool!

Rui S
Great work & paintjob 👍

Hans-Jürgen Haag
Super Job👍😍

Neuling
I agree! 👍👍

Doubtingmango
Following

Neuling
Looks very good!

Neuling
Looking forward here ...........

Neuling
Excellent work. An eyecatcher!

Toffee
Did not follow box, made replica of friend's real '93 in Montego Blue instead

Łukasz Gliński
Bachstelze in 1/400?! I'm curious 😄

Robert Podkoński
Me 2!

Guy Rump
Very nice! 👍

Łukasz Gliński
Very neat finish and the Bachstelze got even the insignia! 👍

Curatorm
I you like tentacles you are at home 🙂

Shar Dipree
Very creative diorama. The ice beam turned out great. 👍

Nicolas
👍

Hans-Jürgen Haag
Nice👍