Haber akışı
Diorama Dude
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
25 16 December 2023, 22:14
Diorama Dude
Thank you Jean-Louis Durand, Mathias Decommere, Doubtingmango, Rui S, Curatorm, CaptGPF for your Comments. I thank all Mates for her Likes and her Interest.
Thank you Jean-Louis Durand, Mathias Decommere, Doubtingmango, Rui S, Curatorm, CaptGPF for your Comments. I thank all Mates for her Likes and her Interest.
21 December 2023, 22:17
Mina Ro
I've had a chance to buy a Fusil Gras and a Lebel rifle recently which came after the period represented here. I may have to reconsider after seeing this diorama.
I've had a chance to buy a Fusil Gras and a Lebel rifle recently which came after the period represented here. I may have to reconsider after seeing this diorama.
25 September, 17:55
Ben M
This looks great! I have to say the French foreign legion had the best headgear as well.
This looks great! I have to say the French foreign legion had the best headgear as well.
25 September, 18:15
Mina Ro
It looks like Captain Danjou is there with his pistol. He died during this battle. The Legion still has his wooden hand and display it during special events.
It looks like Captain Danjou is there with his pistol. He died during this battle. The Legion still has his wooden hand and display it during special events.
26 September, 00:33
Diorama Dude
Every year on the Camarone Anniversary Day (30. April) the Legion took Danjou´s wooden hand out of the museum and presenting the hand on her main parade at the Legion´s headquarter in Aubagne.
Every year on the Camarone Anniversary Day (30. April) the Legion took Danjou´s wooden hand out of the museum and presenting the hand on her main parade at the Legion´s headquarter in Aubagne.
26 September, 20:26
Diorama Dude
Thank you Mina Ro, Neuling and Ben M for your Comment and your Interest on this diorama. I thank all Mates for her Likes and her Interest.
Thank you Mina Ro, Neuling and Ben M for your Comment and your Interest on this diorama. I thank all Mates for her Likes and her Interest.
28 September, 19:38
Stefaan Delzongle
bu öğeyi istiyor
bu öğeyi istiyor
Apollo 17 "The Last J-Mission" CSM + LM + Lunar Rover
Dragon 1:72
11015 2020 Değiştirildi ??? Çok konu (4)28 September, 19:38
Stefaan Delzongle
bu öğeyi istiyor
bu öğeyi istiyor
Apollo 11 Spacecraft with Interior 50th Anniversary Moon Landing
Revell 1:32
03703 2019 Değiştirildi ??? 28 September, 19:36
Mathias Decommere
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
45 Görüntüler
Unexpected Resistance - Weserübung Süd - Hokkerup Denmark - 9th april 1940 - Final Album1:35
proje: 4. Unexpected Resistance
28 17 April, 06:29
Bruce Huxtable
You've been as busy as your cast of players! Creativity plus modelling skills well demonstrated 🙂 Congratulation s🙂
You've been as busy as your cast of players! Creativity plus modelling skills well demonstrated 🙂 Congratulation s🙂
21 April, 18:24
Sy Bar
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
19 Görüntüler
Bf110C-6Yeni: 28 September, 11:39 1:72
I’m amazed this went down, the secret was apply fit then use a hot hairdryer to heat shrink decals on!
proje: Bf-110C-6
23 18 September, 11:53
Sy Bar
Was going to do the Battle of Britain version of this kit but I'm temped to have a go at some winter white wash and the wasp is cooler than the shark mouth 😎
Was going to do the Battle of Britain version of this kit but I'm temped to have a go at some winter white wash and the wasp is cooler than the shark mouth 😎
18 September, 11:56
István Szücs
I also have Bf-110 from the Airfix, I will build an Italian night fighter. The sprues are the same, so I'm watching!
I also have Bf-110 from the Airfix, I will build an Italian night fighter. The sprues are the same, so I'm watching!
18 September, 19:08
Sy Bar
Cheers guys.
I'm have a go at riveting, but going freehand as at this scale using tape was taking so long. I also not sure how much they will stand out on finish kit, but with the wonky line in parts they will probably bee seen from mars 🤣
Cheers guys.
I'm have a go at riveting, but going freehand as at this scale using tape was taking so long. I also not sure how much they will stand out on finish kit, but with the wonky line in parts they will probably bee seen from mars 🤣
22 September, 10:15
Sy Bar
Cheers #Guy 👍
#Skyhiker I found the fit to be good, I had a very slight gap at the front but think that was as much to do with me and the fitting of the pit (not the clearest instructions there). Every thing else was fine and the canopy was a good fit, I did change order of build slightly with the tail section I glued the rear piece to the body first then added the tail (after I'd added the stabilisers/rudders) this made more sense than the instructions 😁
Cheers #Guy 👍
#Skyhiker I found the fit to be good, I had a very slight gap at the front but think that was as much to do with me and the fitting of the pit (not the clearest instructions there). Every thing else was fine and the canopy was a good fit, I did change order of build slightly with the tail section I glued the rear piece to the body first then added the tail (after I'd added the stabilisers/rudders) this made more sense than the instructions 😁
24 September, 21:32
Sy Bar
Only issue I have with this kit are the decals. While they look great and are in perfect register, they have a large amount of film edging and are both thick and delicate at the same time🤪
Having a hard time getting them to settle into the panel lines etc. I usually just need to use micro sol but even ultimate extra strong is not have much effect. Going to have to wait till I get some Tamiya fixer, strong and extra strong hopefully one of these will help 🤞
Only issue I have with this kit are the decals. While they look great and are in perfect register, they have a large amount of film edging and are both thick and delicate at the same time🤪
Having a hard time getting them to settle into the panel lines etc. I usually just need to use micro sol but even ultimate extra strong is not have much effect. Going to have to wait till I get some Tamiya fixer, strong and extra strong hopefully one of these will help 🤞
24 September, 21:44
Mr D
You should be ok with the medium one with Airfix decals,
I like a mix of Water in with the markfix...seems to keep the decal floating longer.
I did the teeth on my p40 this way.
If they started getting bit sicky...l would add bit more water....keep it floating.
Wouldn't like to do shark teeth with HB decals 🤔🤣.... The lightning ⚡ strike on my mig-15 just fell apart with hardly any working.
Good luck with it ..look forward to seeing 😃👍👍
You should be ok with the medium one with Airfix decals,
I like a mix of Water in with the markfix...seems to keep the decal floating longer.
I did the teeth on my p40 this way.
If they started getting bit sicky...l would add bit more water....keep it floating.
Wouldn't like to do shark teeth with HB decals 🤔🤣.... The lightning ⚡ strike on my mig-15 just fell apart with hardly any working.
Good luck with it ..look forward to seeing 😃👍👍
27 September, 13:53
Sy Bar
Cheers for advice #Mr D. Afraid this set of decals were unaffected by all solutions but the mark fit super strong did have some effect. To make head way I found I needed to add the solution then after a few seconds apply hot air from a hairdryer to 'shrink wrap' the decal. These have to be the worst decals I've come across..
I recommend anyone doing this kit to source a set of decals rather than use those provided, they are not for beginners that's for sure. I hope the carrier film will disappear under a gloss coat but I didn't want to risk it so I've only applied the larger decals the smaller ones while add great detail if cartograf here they are 90% carrier film.
Cheers for advice #Mr D. Afraid this set of decals were unaffected by all solutions but the mark fit super strong did have some effect. To make head way I found I needed to add the solution then after a few seconds apply hot air from a hairdryer to 'shrink wrap' the decal. These have to be the worst decals I've come across..
I recommend anyone doing this kit to source a set of decals rather than use those provided, they are not for beginners that's for sure. I hope the carrier film will disappear under a gloss coat but I didn't want to risk it so I've only applied the larger decals the smaller ones while add great detail if cartograf here they are 90% carrier film.
28 September, 19:19
Skyhiker
Why don't you just cut the carrier film away with a knife before applying them?
Why don't you just cut the carrier film away with a knife before applying them?
28 September, 19:29
/tr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=tr
35
35
/tr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo