Haber akışı
Smudge
bu öğenin sahibi
bu öğenin sahibi
UH-1C, UH-1D & UH-1H UH-1C: 174th AHC; UH-1D: 121st, 176th AHC; UH-1H: 11th ACR, 116TH, 173 AHC
Microscale 1:72
72-0497 (72-497) 9 September, 12:45
hortelano
bu öğenin sahibi
bu öğenin sahibi
Churchill Crocodile Build for Churchill Crocodile or Churchill Mk VII
Tamiya 1:35
35100 (100) 1994 Yeni kutu 9 September, 12:43
Alex Rakhimgulov
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
53 Görüntüler
KV-9 for painting practiceYeni: 9 September, 12:39 1:35
Tank commander
proje: KV-9 for painting practice
54 27 June, 09:04
Villiers de Vos
Very nice texturing and weld marks on this Soviet beast. The photo etch details is a nice touch.
Very nice texturing and weld marks on this Soviet beast. The photo etch details is a nice touch.
10 July, 02:10
Alex Rakhimgulov
Thank you, Mate! This photo etch is selfmade from 0.2mm brass plate ))) I need to buy the photo etch bender, to make it better. ))
Thank you, Mate! This photo etch is selfmade from 0.2mm brass plate ))) I need to buy the photo etch bender, to make it better. ))
10 July, 07:14
Alex Rakhimgulov
Thanks, Mate!
I try to make weld beads like on my favorite YT cannel )))
1) I make a groove with scraiber, if it necessary on the plane surfaces.
2) Next, i prepare 2 component putty, and make a thin "laces" out of it.
3) After that, I carefully fill the grooves and angles with putty "laces" and apply welding texture with special tool (toothpick with tip warped with brass sheet, witch forms small speared C shape).
That is all.
Thanks, Mate!
I try to make weld beads like on my favorite YT cannel )))
1) I make a groove with scraiber, if it necessary on the plane surfaces.
2) Next, i prepare 2 component putty, and make a thin "laces" out of it.
3) After that, I carefully fill the grooves and angles with putty "laces" and apply welding texture with special tool (toothpick with tip warped with brass sheet, witch forms small speared C shape).
That is all.
9 August, 09:30
Alex Rakhimgulov
Thanks, Friends! It is a really exciting and addictive process )))
I would like too ask, can anyone tell me, how to paint a "glass"? I mean, i need to imitate a glass on the headlight, and i can't find info, how to do it.
Thanks, Friends! It is a really exciting and addictive process )))
I would like too ask, can anyone tell me, how to paint a "glass"? I mean, i need to imitate a glass on the headlight, and i can't find info, how to do it.
27 August, 10:05
Doubtingmango
I do a mix of light blue, light beige and white. Using only white is just too stark. Hit it with a little clear gloss, and then a grimy wash. Still doesn't compare to the kits with the clear plastic lens covers, but doesn't look bad.
I do a mix of light blue, light beige and white. Using only white is just too stark. Hit it with a little clear gloss, and then a grimy wash. Still doesn't compare to the kits with the clear plastic lens covers, but doesn't look bad.
27 August, 11:24
Bohrmann
The 'painting exercise' is a success. Well done! 👍🏻.If this is an exercise then I am already looking forward to your 'for real work'😉
The 'painting exercise' is a success. Well done! 👍🏻.If this is an exercise then I am already looking forward to your 'for real work'😉
27 August, 13:43
Alex Rakhimgulov
Thanks for kind words! Enjoying every new step on this way! Next goes Tiger )
Thanks for kind words! Enjoying every new step on this way! Next goes Tiger )
27 August, 16:47
ephemeriis _
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
9 September, 12:36
Soeren R.
bu ürünü siparişe göre işaretledi
bu ürünü siparişe göre işaretledi
AH-64D/E EFAB interior 3D decals (Extended forward avionics bays) for Takom kit
Quinta Studio 1:35
QD35118 2023 Yeni araç 9 September, 12:36
Smudge
bu öğenin sahibi
bu öğenin sahibi
B-24J Liberators The Dragon And His Tail, Cocktail Hour & Mabel's Labels
Microscale 1:72
72-0499 (72-499) 9 September, 12:36
Tye Brown
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
9 Görüntüler
Salvinos JR Models Shane Van Gisbergen 2023 Chevrolet Camaro ZL1Yeni: 9 September, 12:36 9 September, 12:28
Soeren R.
bu ürünü siparişe göre işaretledi
bu ürünü siparişe göre işaretledi
"Remove Before Flight" 3D decals Standart external streamers 24"
Quinta Studio 1:48
QP48006 2022 Yeni araç 9 September, 12:36
Sergio Ordonez
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
9 Görüntüler
Fairey Gannet AS. Mk 1Yeni: 9 September, 10:51 1:72
This one it's been a little nightmare: maybe plastic has chrystalized during storage, as too soft areas are mixed with
proje: Fairey Gannet AS. Mk 1
10 13 August, 17:12
Sergio Ordonez
Ekki, but do not expect anything marvellous: there IS not a good base to make a good one from this one.
Ekki, but do not expect anything marvellous: there IS not a good base to make a good one from this one.
13 August, 17:36
Duster_d
I'll look at it with interest. I have such a "Gannet" former FROG\NOVO from ARK-models in my stash.
I'll look at it with interest. I have such a "Gannet" former FROG\NOVO from ARK-models in my stash.
13 August, 17:43
Sergio Ordonez
Thanks you mates. The things is I LOVE this ugly bird. By the moment, I will try to improve the landing gear sinks and complete the cockpit to be a little more real. The recession of panels; well, I think the plastic is not enough thik and strong to try, so I will keep It as It is.
Thanks you mates. The things is I LOVE this ugly bird. By the moment, I will try to improve the landing gear sinks and complete the cockpit to be a little more real. The recession of panels; well, I think the plastic is not enough thik and strong to try, so I will keep It as It is.
13 August, 18:24
DerMattes
Following as well. I started this exact same kit months ago. Looking forward how you will proceed with this 👍
Following as well. I started this exact same kit months ago. Looking forward how you will proceed with this 👍
9 September, 12:33
Frederic De Bruijn
bu öğeyi istiyor
bu öğeyi istiyor
F-104 Starfighter (C Version) 'Vietnam War 479th Tactical Fighter Wing'
Hasegawa 1:48
07533 2024 Yeni çıkartmalar 9 September, 12:28
Rik Benoot
bu öğenin sahibi
bu öğenin sahibi
Israeli AFVs #11 - Centurion and M50 Super Sherman Six Day War markings
Star Decals 1:35
35-C1228 2019 Yeni araç Çok konu (2)9 September, 12:26
coporado
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
48 28 March, 16:26
coporado
Build completed so far. Still waiting for the metal barrel. Quite challenging to attach the Zimmerit- PE parts. Was annoying when it comes to round shapes on the turret front armor. Treating those metal parts with some heat, made them much more handy to shape. First time using Friul tracks, very time consuming, but the best track result I´ve seen so far 🙂
Build completed so far. Still waiting for the metal barrel. Quite challenging to attach the Zimmerit- PE parts. Was annoying when it comes to round shapes on the turret front armor. Treating those metal parts with some heat, made them much more handy to shape. First time using Friul tracks, very time consuming, but the best track result I´ve seen so far 🙂
1 April, 13:59
coporado
Lower part of the tank was painted and received weathering. Tracks were mounted and connected. Rear fenders were the installed. Next is masking lower section and painting the upper parts.
Lower part of the tank was painted and received weathering. Tracks were mounted and connected. Rear fenders were the installed. Next is masking lower section and painting the upper parts.
2 June, 10:18
Christoph Kunz
Nice job. I'm taking a seat.
Is it going to be some "Magdeburg-stuff" again?
Nice job. I'm taking a seat.
Is it going to be some "Magdeburg-stuff" again?
2 June, 11:03
coporado
The tank received several rounds of paint. Starting with red brown primer, followed by dark yellow as base color and finally the camo pattern. Next is detail painting, and weathering.
The tank received several rounds of paint. Starting with red brown primer, followed by dark yellow as base color and finally the camo pattern. Next is detail painting, and weathering.
9 June, 15:30
coporado
Initial weathering steps were conducted; chipping the Zimmerit and the metal surfaces.
Initial weathering steps were conducted; chipping the Zimmerit and the metal surfaces.
16 June, 09:20
coporado
Thanks, Nick!
The exhaust was painted in a medium grey first. The parts having armor plates underneath were left in the original painting, as these area is less affected by heat and corrosion. Then a warm white followed by a reddish brown was applied using the sponge technique. Next was rust tones painted and blended with enamels. Colors of the original camo scheme where then applied with a sponge in the areas with less corrosion, to turn out the different stages of heat impact. Finally the upper parts received a slightly black shade to simulate the exhaust fume grime.
Thanks, Nick!
The exhaust was painted in a medium grey first. The parts having armor plates underneath were left in the original painting, as these area is less affected by heat and corrosion. Then a warm white followed by a reddish brown was applied using the sponge technique. Next was rust tones painted and blended with enamels. Colors of the original camo scheme where then applied with a sponge in the areas with less corrosion, to turn out the different stages of heat impact. Finally the upper parts received a slightly black shade to simulate the exhaust fume grime.
23 June, 08:21
coporado
Kick off for the base. Styrofoam is the desired material for house, road and pavement. As the road and pavement is covered with lots of dirt and debris, I added cobblestone only randomly. For the road thin sheets of styrofoam were shaped using a 3D printed rolling pin. In order to create more texture the stones were carved with a pencil. For the pavement an old brush was used to shape the small stones. Everything was painted in several greyish, brownish, sandy tones with acrylics.
The shape of house was cut with the Proxxon hot wire. To make the facade more interesting I added some "decoration" around the upper windows. A border seperates the upper and lower floor. Next is closing the gaps between the decoration elements at the upper windows and cover the lower floor with wood.
Kick off for the base. Styrofoam is the desired material for house, road and pavement. As the road and pavement is covered with lots of dirt and debris, I added cobblestone only randomly. For the road thin sheets of styrofoam were shaped using a 3D printed rolling pin. In order to create more texture the stones were carved with a pencil. For the pavement an old brush was used to shape the small stones. Everything was painted in several greyish, brownish, sandy tones with acrylics.
The shape of house was cut with the Proxxon hot wire. To make the facade more interesting I added some "decoration" around the upper windows. A border seperates the upper and lower floor. Next is closing the gaps between the decoration elements at the upper windows and cover the lower floor with wood.
28 July, 07:18
coporado
Slowly taking shape. Lower floor fassade updated with some wooden panels. Dirt and debris was added to the road and pavement and painted with the airbrush. I used the same colors I used for weathering the tank tracks. Next is windows and door installation and of course detailing the interior.
Slowly taking shape. Lower floor fassade updated with some wooden panels. Dirt and debris was added to the road and pavement and painted with the airbrush. I used the same colors I used for weathering the tank tracks. Next is windows and door installation and of course detailing the interior.
18 August, 12:32
coporado
Lower and upper floor and walls were detailed using Balsa wood and wallpaper. Added windows using Balsa and lasercut as well as some transparent plastic for the glas parts. Also the infantry miniatures arrived meanwhile.
Lower and upper floor and walls were detailed using Balsa wood and wallpaper. Added windows using Balsa and lasercut as well as some transparent plastic for the glas parts. Also the infantry miniatures arrived meanwhile.
31 August, 13:17
coporado
Scratch built some interior from balsa wood and plastic residues. The attic floor was installed. Next is finally building the lower floor entrance and preparing the roof.
Scratch built some interior from balsa wood and plastic residues. The attic floor was installed. Next is finally building the lower floor entrance and preparing the roof.
9 September, 12:26
/tr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=tr
35
35
/tr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo