Haber akışı

Spanjaard
are you going scratch build it? i am in!

jan zumack
Hi spanjaard, yes i do. This ist a complete Scratch build. At the end the ship will be 790mm Long. I am crazy, i now.

Robin (WhiteGlint)
👀 Ohhh, following this one. 👍

Torsten
Exciting 👀

Shar Dipree
Following! 👍

jan zumack
Welcome Torsten, Robin and Shar 🤗

gorby
WOW! Very ambitious build.

Villiers de Vos
Fantastic work.

jan zumack
Hi Villiers 😁 Welcome gorby, yes it is 😅

Vincent
This is looking amazing. Very nice subject and building skills till now. Looking forward to see where it is going.

jan zumack
Welcome Vincent, thanks for you words.

Ingo F
Oh scratch build, I am in!
May the modeling force be with you. 😄

jan zumack
Welcome Ingo, 😀

Ben M
I definitely want to watch this. The scratchbuilding looks great. Yes, this project will definitely take some time to complete.

jan zumack
Hi Ben, yeah it will. At now i build ca 30 hours.

Freak
What an incredible project! This looks like a masterclass in scratchbuilding, can't wait to see what's next!

jan zumack
Hi Freak. I give my best. 🤘

Zach Wilson
looking good so far

CaptGPF
Damn! Can't wait to see the final result!

jan zumack
Welcome Zach and CaptGPF. 🤗

Alexander
Holy.. this looks amazing so far!👍👍
Definitely watching how this unfolds!

jan zumack
Welcome Alexander.🤗

Stephan H.
This is so great! I am throwing my 3D printer out of the window and try learning something here 😉
I also loved the ship design and how parts move during flight.
Viel Erfolg

jan zumack
Hi Stephan, i do it oldschool because i didnt have a 3d printer. 😂

Torsten
Awesome, I like old school ^^

jan zumack
Thanks Torsten 😁

Pepe
Wooow!!!! huge work

jan zumack
Hi Pepe, yes it is😅

Hans
School of scratch building.

jan zumack
Welcome Hans, yeah i'm in the school. 😅

Torsten
Still impressive 😎

jan zumack
Thanks Torsten, it grows Bit by Bit.

Hans-Jürgen Haag
Extrem scratch work, I like is👍👍👍🥇

jan zumack
Welcome Hans-Jürgen, thanks for your words.

Jörg Schäfer
Craziness. Great scratch work. I'm excited. 👍

jan zumack
Hi Jörg, thanks you.

Rando
Just super impressive, excited to see all the progress.

David Taylor
Watching.

Davide Vitali
This is insane. I like it!!

jan zumack
Hi Guys. Thanks for your comments. 😁

Kyle DeHart
Oh my. Watching with interest. Incredible.

jan zumack
Hi Kyle, Hope you enjoy it.

Sam S
Out of this world build, bring out the popcorn! 🍿

jan zumack
Hi Sam and thanks you. 😁

Dash Rendar
Hot damn, very nice! Love it.

Treehugger
Final model looks like it might perhaps be heavy, can the landing gear handle the weight?

jan zumack
He treehugger, i tested the legs with 2kg per leg, i hope it is enough. If its not i drill in a seperat roundsteel to Catch the weight.

Lochsa River
checkin this out....

jan zumack
Welcome Lochsa. 🤗

Uwe Kaeding
This is looking fantastic - looking forward to see where it goes.

Peter G
No 3D printer? Are you using a cutting machine? How do you get such precise cuts? Loving it!

jan zumack
Hi Uwe, hi Peter,

jan zumack
I use an old drawing bord to Cut the pieces i need. And Stripes, tubes and rods from evergreen.

Lukas Muller
wow !!!

jan zumack
Welcome Lukas 🤗

Jennifer Franklin
This is an impressive undertaking, following 👀

jan zumack
Hi Jennifer. 🤗

Jennifer Franklin
Hi jan. 🤗

David Taylor
Time and patience,brill.

Spanjaard
insane detail.... amazing.

Skyhiker
Great project

Rui
I have no idea how I missed this build!!! 😲
Following !😁

Skyhiker
I'm sorry but this is WAY too cool. It just keeps getting better and better.

jan zumack
Thank you all for your kindly words. I am suprised by my self of the result of the Projekt so far.

Dash Rendar
Damn, those tiny pipes around the jet exhausts. Very cool.

Skyhiker
Picture 210 looks like a boom box. I wonder what kind of funky music would come out of that?

Vincent
This build is looking great. Im looking forward to the painting phase!

jan zumack
@ skyhiker, the Cantina band! :⁠-⁠)

jan zumack
Thank you Vincent.

Shar Dipree
Awesome work! Absolutely fantastic.

jan zumack
Thanks Shar. 🤗

Ian Doody
Excellent scratch build. Brilliant work.

jan zumack
Thank you Ian, i give my best.

Treehugger
What marverous stuff. 🙂

Robin (WhiteGlint)
Amazing progress Jan 👍

jan zumack
Thank you Robin. 🤗

Skyhiker
Funny, that boom box you're making looks like a spaceship.

jan zumack
😂😂😂

NLAWScametovisit
Using your build to show my coworkers how awesome this hobby can be

jan zumack
Yeah do this NLAW. 👍

S M
Incredible job here!

jan zumack
Thank you S M i will continue soon. 😁

Bzmily
Incredible work🥰

jan zumack
Thank you Bzmily 🤘

Alec K
Wow, just found this and what an incredible project! Just fantastic, thank you for sharing it here 👍

Christian Lehmann
Excellent! How could I miss this till now?

jan zumack
Thank you Christian, i go on vacation now, i am back in few weeks.

Florian H.
Da schau ich mal zu

Dave Flitton
Massive! where are you going to put it?

BAT21
Right next to my Mi-22 😉

Yellow 23 | Album by BAT21 (1:72)

Alec K
Another monster! I am in 👍

Nicolas
Ich nehm mir auch mal nen Stuhl.

BAT21
Welcome on board.

Thomas Kolb
Cool! This I just need to follow!

Robert Podkoński
Me too!

BAT21
I'm glad you're part of this project.

Robert Podkoński
I have uploaded a few photos of Polish Mi-6 before and after restoration here:
Once there was a collection | Album by podkon ; and here:
Polish Air Force Museum - Dęblin | Album by podkon. Perhaps you will find them useful.

BAT21
👍

Ekki
Watching.

Michael Kohl
BAT21 builds a chopper? Not without me!

BAT21
Thank you very much for your interest.

Pierre-Christian Baudru
Can't wait to see it finish !

Florian H.
Sehr schön, Gratulation zu diesem Ergebnis 👍

BAT21
Danke Florian.

Bernd Grün
Promising start. 👍🏻 Following with interest!

BAT21
It's nice that the audience seats are filling up.

Alec K
Solid progress 👍

Alexander Grivonev
Habe den Kit seit Jahren im Besitz, traue mich aber nicht ran. Was für ein Monster👍

BAT21
Wer bei der Tu 128 von Trumpeter alle Fehler in Perfektion beseitigt hat, muss sich nicht vor der Mi-6 fürchten.
Etwas Spachtelmasse und Schleifpapier bereitlegen... und schon kann es losgehen 😉

Alexander Grivonev
Ja das war wirklich eine Baustelle das Ding. Aber trotz des Ehrgeizes der Chinesen, dem Modellbauer auch den letzten Nerv zu rauben, sieht mir Amodel so auf den ersten Blick nach mehr Arbeit aus...

Gergő Takács
Wow! Very cool Project! I will take a seat! 🙂

Pierre Pierre
Following

BAT21
Feel welcome mates.

Michael Kohl
Starts to look like a Mil Mi-6? Well, then it's time to charge the teaser to a picture of your model. 😉

Juergen Klinglhuber
Joining in late, but sure worth it. Clean built on this "filling the gaps" giant. 👍

Treehugger
Q: The tiny "brass" colored tubes for the wiring on the main rotor head, are those bits of cut up syringe tips?

BAT21
For these parts I cut 0.5mm brass tubes from Albion Alloys.

Spanjaard
rotor head is truly impressive

Alec K
I agree, pimped to the hilt 👍

Casey Beckett
Recently discovered Albion Alloys here - lovely stuff!

BAT21
Many thanks guys, much appreciated.

CaptGPF
That rotor work is sick!
…but so is the PE cockpit work at this scale! Watching!

Alec K
Excellent progress 👍

Łukasz Gliński
On the pic #35 it looks professional, not provisional 😉

Florian H.
Sehr schönes farbspiel

BAT21
Many thanks 👍

Łukasz Gliński
Yes it is time 👍 Brilliant shading btw

Michael Kohl
Great finish

Erik
"So what do you think? Time to remove the masks from the windows?"
Yes! 👍 😉

BAT21
Thank you mates.
The self-cut masks on the side windows revealed a catastrophic picture after removal: something sticky remained on the windows... the hoped-for cover was also rather poor, the paint got under the masks at the edges. 🤬

Now I'll make a calming coffee and then try to repair it.

Alec K
Damn, that sucks. I had same experience on several builds, nothing some scraping and reapplication of Future can't fix.

Thomas Kolb
That's unfortunate, but maybe you can remove the tape residue with some IPA alcohol and cotton buds?

BAT21
I scraped everything off with a toothpick, more or less. Not the best result, but the model was able to avoid being thrown away.

Mr D
Very nicely done, great panel shading 👌 Brilliant 👍👍👍

Mr D
Nicely done 👍 Great panel shading 👌, Brilliant 👍👍

Guy Rump
A very good result, you wouldn't realise the issues you had. 👍

Spanjaard
seems you recovered pretty well from the problem, congratulations great result

Ekki
Very, very good chopper!
Well done.

Nicolas
Great result. 👍

BAT21
Thanks mates, much appreciated

Rui S
Excellent as always 👍

BAT21
With the attachment of the last parts and the assembly of the antenna forest, the helicopter is finished and the project is complete.

Thanks to everyone who has been part of this strenuous journey... and now have fun with the final pictures.

Łukasz Gliński
Respect for the antennas. It looks great in the taiga 👍

Spanjaard
congrats on a great model

Neuling
Top work and photos!

Ronan
Very nice, congrats 👍

BAT21
Many thanks for your nice words mates - much appreciated.

PHILIPPE PINON
MERCI A TOUS POUR COMPLIMENT

Martin Oostrom
I love it! Great colour

Martin Oostrom
No requests, but you might find some planes here The Hermeskeil Files | Project by Mahoo76 (1:1)

Skyhiker
Oh yes. Thank you Martin. The Junior family collection in Hermeskeil would be a great destination.

Michael Kohl
Do-24 in Oberschleißheim close to Munich (department of the Deutsche Museum).

Skyhiker
Gee, Michael, that's one Big ask! Do-24 would be great to draw but it will take me some time. That's one complicated machine. What scale would you need?

Skyhiker
If I were to do the Do-24 I think I would probably start by going to the Technik Museum Speyer. The fuselage they have is easier to access. It being in such rough condition actually makes it easier to get accurate measurements. But afterwards I would have to contact the Deutsche Museum to get access to their plane in order to complete the drawings.

Michael Kohl
Hi Shyhiker. I am not asking. I am just wishing and dreaming. 🙂
1:72 would be wonderful for me. I've completed the interior of my spanish Do-24 and riveting (negative and positive) will be the second next task after building the spanish cupolas.

Alec K
Do 24 would indeed be great 👍

Skyhiker
Do 24 would definitely be easier to do than a Do X. I will be heading to Southern Germany in a two weeks and I will try to stop by Oberschleißheim to assess the idea and see if it is possible to get special access to the plane.

shadowlight
If it possible i would be interested in pictures from inside of the Do24 (cockpit area and the storage room with the 2 large panels).

Skyhiker
If I can gain access to the inside I will of course make photos. It will completely depend on the museum. Negotiating such things can take time so I hope you're not in a rush. The drawing process itself usually takes at least 100 hours to do depending on the aircraft. This is seriously not just rivet counting but also measuring.

Skyhiker
Here is a list of aircraft within my area. Let me know if you want blueprints of any of these and I will try to make them.
Alouette II
Antonov An-2
Antonov An-26
Arado Ar-79
Arado Ar-96
Avro 504K
Bell UH-1D Iroquois
Bf 109E
Bf 110F-2
Bücker Bü 131
Bücker Bü 181
Boeing Vertol/Piasecki H-21
Bristol Type 171 Sycamore HR.52
Canadair CL-89 (AN/USD-501)
Canadair CL-289 (AN/USD-502)
CASA 2.111
DFS 230
DFS SG 38 Schulgleiter
Douglas C-47 Skytrain
Etrich-Rumpler Taube
Farman III
Fieseler Fi 156 Storch
Focke-Achgelis Fa 330
Focke-Wulf 190 A-8
Fokker Dr.I
Fokker E.III
FM Q2 target drone
Fritz X
Gotha Go 242
Heinkel He 162
Henschel Hs 293 A-1
Hispano Aviación HA-1112
Horten H.II
Ilyushin Il-2
Ilyushin Il-28
Junkers J 9 (DI)
Junkers Ju 52
Junkers Ju 87
Junkers Ju 88G
Klemm Kl 107
Klemm Kl 35
Let L-29 Delfin
Let L-39V Albatros
Let L-410 UVP
MBB Bo-105
Messerschmitt Bf 108 Taifun
Messerschmitt Me 163
MGM-1 Matador
MGM-31 Pershing
Mikoyan-Gurevich MiG-15bis
Mikoyan-Gurevich MiG-17F
Mikoyan-Gurevich MiG-17PF
Mikoyan-Gurevich MiG-21M
Mikoyan-Gurevich MiG-21UM
Mikoyan-Gurevich MiG-21F-13
Mikoyan-Gurevich MiG-23BN
Mikoyan-Gurevich MiG-23MF
Mikoyan-Gurevich MiG-29G
Mil Mi-2
Mil Mi-4A
Mil Mi-8S
Mil Mi-8T
Mil Mi-9
Mil Mi-24D
Mil Mi-24P
North American F-86K
Piper PA-18 Super Cub
Pützer Elster
Raab Doppelraab IV
Reims Cessna F172
Republic F-84F Thunderstreak
Republic RF-84F Thunderflash
Rockwell OV-10B Bronco
RW 3 Multoplan
Saunders Roe Skeeter
Schneider Grunau Baby II
Schwarz-Propellerwerke Rauchspurautomat 160
Siemens-Schuckert D.III
Sikorsky H-34G
Sukhoi Su-22M4
Transall C-160
TUCAN-95
Yakovlev Yak-11
Yakovlev Yak-18
Zlín Z 43

Michael Kohl
Alouette II
Bell UH-1D
Fieseler Fi 156 Storch
Fokker E III
Messerschmitt Bf 108 Taifun
Mikoyan-Gurevich MiG-23MF
Mil Mi-4
Rockwell OV-10B Bronco
🙂

Skyhiker
Thanks Michael, I am working on the blueprints of a Focke-Wulf 190 A-8 right now. Once I am done I will probably start on drawing out the Fokker E III and I will try to check what is required to do the Do 24, although that will take a lot more organization.