Haber akışı
Max V.
bu öğenin sahibi
bu öğenin sahibi
J7W1 "Shinden" Canopy & Wheel Masks Oramask 810 Flexible Vinyl (Zoukei-Mura)
Kit Masx 1:48
48-091V 2024 Yeni araç 19 July, 18:19
John
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
52 Görüntüler
UH-72 A LakotaYeni: 18 July, 22:08 1:32
Finally finished, glad to be done with the "fiddly bits" stage for sure.
proje: Eurocopter UH-72A Lakota
33 13 May, 18:02
John
Thanks bughunter! I should also add the molded on seatbelts Revell provided are not the best, but I got a case of the lazies and didn't replace them all with tape. To be fair,there are nine seats.
Thanks bughunter! I should also add the molded on seatbelts Revell provided are not the best, but I got a case of the lazies and didn't replace them all with tape. To be fair,there are nine seats.
14 May, 02:50
J35J
Totally missed this one until now. Really great build, paintwork and weathering 👍🏻👏🏼
Totally missed this one until now. Really great build, paintwork and weathering 👍🏻👏🏼
7 July, 20:20
Александр Александров
bu öğeyi istiyor
bu öğeyi istiyor
МиГ-31 Советский истребитель-перехватчик
MiG-31 "Soviet interceptor fighter"Zvezda 1:72
7229 2017 Yeni kutu 19 July, 18:17
Mr Britmodeller
Added a new review for:
Added a new review for:
The Heinkel He 177 Greif A Detailed Guide To The Luftwaffe’s Troubled Strategic Bomb...
Airframe Album No. 20
Richard A. Franks
2024 19 July, 18:16
Nicolas
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
30 Görüntüler
WIP: Eurocopter BK-117 "Space Design" D-HBKS Yeni: 19 July, 18:11 1:72
Some Styrenstrips & sheet and some aluminium tape.
proje: BK 117 "SPACE DESIGN"
16 24 June, 19:12
Nicolas
As soon as I finish one of my 3 current projects (2 of them ar nearly done) I will start with this little helicopter.
As soon as I finish one of my 3 current projects (2 of them ar nearly done) I will start with this little helicopter.
24 June, 19:17
Nicolas
As I am covid positive (fortunately only with very mild syntomas) I had some time to build again today. So far I am positively surprised by the accuracy of fit. There are no locator pins, but I can now click the fuselage and cockpit together and even the tail section holds without glue.
As I am covid positive (fortunately only with very mild syntomas) I had some time to build again today. So far I am positively surprised by the accuracy of fit. There are no locator pins, but I can now click the fuselage and cockpit together and even the tail section holds without glue.
8 July, 19:15
Nicolas
I would like to do some rivets on the exteriour, but I couldn't find some good drawings. If somebody has a hint I would be grateful.
I would like to do some rivets on the exteriour, but I couldn't find some good drawings. If somebody has a hint I would be grateful.
8 July, 19:56
Nicolas
Today I started installing the controls. Doing so I noticed, the collectiv controls are missinh in the kit. So I started scratchbuilding them after photos. Also fabricated and installed blinds for the paxes.
Today I started installing the controls. Doing so I noticed, the collectiv controls are missinh in the kit. So I started scratchbuilding them after photos. Also fabricated and installed blinds for the paxes.
9 July, 19:06
Shar Dipree
I have the same kit too. I'm really looking forward to your results. Following. 🙂
I have the same kit too. I'm really looking forward to your results. Following. 🙂
13 July, 05:27
Nicolas
Welcome Łukasz, there is no reason to be afraid. The fit seams quite good, and the missing details is somthin one can improve. 😉
Welcome Łukasz, there is no reason to be afraid. The fit seams quite good, and the missing details is somthin one can improve. 😉
15 July, 16:33
Александр Александров
bu öğeyi istiyor
bu öğeyi istiyor
МиГ-31 Советский истребитель-перехватчик
MiG-31 "Soviet interceptor fighter"Zvezda 1:72
7229 2017 Yeni kutu 19 July, 18:15
Александр Александров
bu öğenin sahibi
bu öğenin sahibi
МиГ-31 Советский истребитель-перехватчик
MiG-31 "Soviet interceptor fighter"Zvezda 1:72
7229 2017 Yeni kutu 19 July, 18:13
John Hughes
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
20 Görüntüler
Takom Krupp Raumer SYeni: 19 July, 18:10 1:35
A final test fit of the major components before priming.
proje: Takom Krupp Raumer S
12 2 July, 18:40
John Hughes
Well, okay, Gorby, but follow at your own risk. It is a mine clearing vehicle, after all.
Well, okay, Gorby, but follow at your own risk. It is a mine clearing vehicle, after all.
3 July, 17:27
gorby
😄 😄 😄
Should be safe enough. At 150 tons you're going to know which bit it's cleared. 😄
😄 😄 😄
Should be safe enough. At 150 tons you're going to know which bit it's cleared. 😄
3 July, 18:00
NLAWScametovisit
Oh wow. Ive never heard of this thing before! When I saw the first picture I thought at first must be an alternate history tank. Following with interest!
Oh wow. Ive never heard of this thing before! When I saw the first picture I thought at first must be an alternate history tank. Following with interest!
6 July, 14:33
Crutch
bu öğenin sahibi
bu öğenin sahibi
MiG-29 Heroes of Kościuszko new paint scheme part I
ModelMaker 1:48
D48087 19 July, 18:09
Arjan Ouwendijk
bu öğeyi istiyor
bu öğeyi istiyor
Resin Cast Truck Drop Receiver with Ball
B-N-L Resins 1:24
19 July, 18:05
Arjan Ouwendijk
bu öğeyi istiyor
bu öğeyi istiyor
Mopar Torque Flite Transmission Long Tail
B-N-L Resins 1:25
Transmission 19 July, 18:05
Guy Shepherd
bu öğenin sahibi
bu öğenin sahibi
Focke-Wulf Fw 190A-6 w/Wgr. 21 & Full engine and weapons interior
Border Model 1:35
BF-003 2023 Yeni araç 19 July, 18:05
Arjan Ouwendijk
bu öğeyi istiyor
bu öğeyi istiyor
1/24-1/25 Chevy 454 Single Carb Engine Kit
B-N-L Resins 1:24
109 19 July, 18:05
/tr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=tr
35
35
/tr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo