Haber akışı
MoJo
bu öğeyi takas edilebilir / satılabilir olarak işaretlendi
bu öğeyi takas edilebilir / satılabilir olarak işaretlendi
13 October, 09:51
Stéphane Jayet
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
34 14 July, 16:30
Stéphane Jayet
Promising kit replacing glue by screw in many cases, but there are some moulding issue, so parts have to be well prepared.
Promising kit replacing glue by screw in many cases, but there are some moulding issue, so parts have to be well prepared.
16 July, 11:27
Stéphane Jayet
@george, during my vacations for 2 weeks I installed some books on it and it is now almost ok
@george, during my vacations for 2 weeks I installed some books on it and it is now almost ok
10 August, 14:59
bossy122
How will you do the black pinstripe? That is what has always kept me from trying this kit.
How will you do the black pinstripe? That is what has always kept me from trying this kit.
12 October, 06:42
Stéphane Jayet
@George, I like this engine as well, and I don't remind a kit where the belts are really belt (not plastic formed with the pulleys).
@George, I like this engine as well, and I don't remind a kit where the belts are really belt (not plastic formed with the pulleys).
12 October, 11:48
Stéphane Jayet
@bossy122, frankly speaking, I don't know yet. 2 options on the table : option 1 is to cut the decals from the box, option 2 is to do some masking (using tracing paper on the original decals). Option 2 is my preferred option so far.
I already painted the body twice because I had some issues with the masking tape (removing the paint), so hope it will work at first try....
@bossy122, frankly speaking, I don't know yet. 2 options on the table : option 1 is to cut the decals from the box, option 2 is to do some masking (using tracing paper on the original decals). Option 2 is my preferred option so far.
I already painted the body twice because I had some issues with the masking tape (removing the paint), so hope it will work at first try....
12 October, 11:53
bossy122
Can you copy the kits pinstripe then print your own? A little white on one side and a little yellow on the other, covering up any tapes leaks as well.
Can you copy the kits pinstripe then print your own? A little white on one side and a little yellow on the other, covering up any tapes leaks as well.
13 October, 03:03
Alexander Grivonev
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
189 Görüntüler
Porsche 550 Spyder - WiPYeni: 12 October, 15:26 1:24
Place it on the surface and gently apply some force with the flat end of the pen
proje: Porsche 550 Spyder
65 15 May, 11:09
Treehugger
Question for OP:
What brand might be selling vacuum formed clear parts? Seems like you found some as seen in photo #11. I've seen some for airplane/jet canopies, but none for cars, so I wouldn't know where to look.
Question for OP:
What brand might be selling vacuum formed clear parts? Seems like you found some as seen in photo #11. I've seen some for airplane/jet canopies, but none for cars, so I wouldn't know where to look.
3 June, 13:37
Alexander Grivonev
Hey Treehugger, the parts in the picture are part of the kit. But funny that you mention this topic because I actually dealt with this question myself recently. I finished two 964s earlier this year (Revell and Fujimi) and the clear parts in both kits were of very poor quality. Searched for aftermarket replacement and found nothing. So I decided to try myself at vacuforming and made the clear parts myself which turned out to be pretty decent (after countless tries and errors) I have not posted pictures of the builds yet but intend to, keep an eye open. You are right, there is definitely a lack of aftermarket windshields for cars...
Hey Treehugger, the parts in the picture are part of the kit. But funny that you mention this topic because I actually dealt with this question myself recently. I finished two 964s earlier this year (Revell and Fujimi) and the clear parts in both kits were of very poor quality. Searched for aftermarket replacement and found nothing. So I decided to try myself at vacuforming and made the clear parts myself which turned out to be pretty decent (after countless tries and errors) I have not posted pictures of the builds yet but intend to, keep an eye open. You are right, there is definitely a lack of aftermarket windshields for cars...
3 June, 15:17
Alexander Grivonev
Ahem, let`s continue here shall we? Not that I was absent for three months or something...
Ahem, let`s continue here shall we? Not that I was absent for three months or something...
6 September, 17:27
Marcel
Looks very good so far, looking forward to the end result. Very interesting to read your notes.
Looks very good so far, looking forward to the end result. Very interesting to read your notes.
11 September, 08:06
Alexander Grivonev
Thx mates, I hope my explanation is comprehensive, if not do ask!
Thx mates, I hope my explanation is comprehensive, if not do ask!
11 September, 16:14
bughunter
Alexander, I'm really sorry about this mishap!
They show us the difference between a normal modeller and a master modeller: mishaps happen to both, but with you there's nothing to see afterwards!
Alexander, I'm really sorry about this mishap!
They show us the difference between a normal modeller and a master modeller: mishaps happen to both, but with you there's nothing to see afterwards!
19 September, 17:33
Alexander Grivonev
If you only knew how many car models I had to repaint! I honestly think most of them, partly or in whole. It is a rarity a paintjob succeeds at the first try. I don`t even call them "mishaps". Just "happy little accidents" like Bob Ross 😄
If you only knew how many car models I had to repaint! I honestly think most of them, partly or in whole. It is a rarity a paintjob succeeds at the first try. I don`t even call them "mishaps". Just "happy little accidents" like Bob Ross 😄
19 September, 17:46
bughunter
Oh yes, the famous late night painting sessions on TV with the "happy little trees" 🙂 I was always fascinated by his work!
Oh yes, the famous late night painting sessions on TV with the "happy little trees" 🙂 I was always fascinated by his work!
19 September, 18:19
Alexander Grivonev
Exactly, the lullaby channel😄 no, the guy was really great.
But on the topic of repaintings again, I actually counted the car models which are right now in my home. There are a total 16 on display and I had to redo the paintjob on 9 of them! Partly or in whole. So that is actually not the exception but the rule 👍
Exactly, the lullaby channel😄 no, the guy was really great.
But on the topic of repaintings again, I actually counted the car models which are right now in my home. There are a total 16 on display and I had to redo the paintjob on 9 of them! Partly or in whole. So that is actually not the exception but the rule 👍
19 September, 18:29
bughunter
Anyway, your car paint jobs here on SM are the reference for me, no kidding!
Thank you also very much for the detailed description about used paints, 2K stuff and thinners etc in your build logs 👍
Fortunately, I don't normally need such high-gloss finishes, but I have helped other modellers (no SM members - yet) several times by pointing them to your build reports.
Thank you very much, your documentation effort is highly appreciated!
Anyway, your car paint jobs here on SM are the reference for me, no kidding!
Thank you also very much for the detailed description about used paints, 2K stuff and thinners etc in your build logs 👍
Fortunately, I don't normally need such high-gloss finishes, but I have helped other modellers (no SM members - yet) several times by pointing them to your build reports.
Thank you very much, your documentation effort is highly appreciated!
19 September, 18:45
Mr D
Very smart 👌 and neatly done 👍
Like your parts organiser, definitely on shopping list.
Very smart 👌 and neatly done 👍
Like your parts organiser, definitely on shopping list.
19 September, 20:05
Lorraine Lin
Alexander, fantastic work!Really like the painting jobs, the "leather" seats and car body. And the whole process is well documented, I leant a lot. Will add this page to my favorite, as I need to go through all these pictures before I build my next car. Thank you for sharing.
Alexander, fantastic work!Really like the painting jobs, the "leather" seats and car body. And the whole process is well documented, I leant a lot. Will add this page to my favorite, as I need to go through all these pictures before I build my next car. Thank you for sharing.
21 September, 10:54
Mr D
The wheel are so realistic 👍👍
Did they use the Rudge wheel...like in the gull-wing??
The wheel are so realistic 👍👍
Did they use the Rudge wheel...like in the gull-wing??
21 September, 15:53
Landlubber Mike
Wow, this is incredible! Thank you for sharing your techniques, I learned a lot!
Wow, this is incredible! Thank you for sharing your techniques, I learned a lot!
22 September, 02:47
Alexander Grivonev
Lorraine, you are welcome!
Mr D, I must admit I had to google what "Rudge wheels" are. but it seems to be an own VW/Porsche design that differs from Rudge wheels. USCP sells them separately too.
Landlubber Mike, my pleasure!
Lorraine, you are welcome!
Mr D, I must admit I had to google what "Rudge wheels" are. but it seems to be an own VW/Porsche design that differs from Rudge wheels. USCP sells them separately too.
Landlubber Mike, my pleasure!
22 September, 13:45
Alexander Grivonev
Back from a short vacation, the paint has cured. Let's wrap this one up..
Back from a short vacation, the paint has cured. Let's wrap this one up..
3 October, 06:06
Landlubber Mike
Thank you for showing how you attach the small PE (like name badges) on the body. I'm stuck on a couple of cars at the moment trying to figure out what to do as I was worried about using CA and causing the same issue you had with your grills. I'll have to pick up some of that Micro Liquitape.
Thank you for showing how you attach the small PE (like name badges) on the body. I'm stuck on a couple of cars at the moment trying to figure out what to do as I was worried about using CA and causing the same issue you had with your grills. I'll have to pick up some of that Micro Liquitape.
11 October, 20:56
Alexander Grivonev
Thx guys! Mike, CA leaves absolutely no room for error, found this glue to be just perfect for the job.
Thx guys! Mike, CA leaves absolutely no room for error, found this glue to be just perfect for the job.
12 October, 15:35
Bozzer
I gotta admit, I'm gonna have to get some of that Liquitape. It certainly does the job. I do however, wonder if it lasts? We've all glued bits back on, that have fell off our models, just from age alone? You would have to carefully replace it, so as not to upset the paint?
I gotta admit, I'm gonna have to get some of that Liquitape. It certainly does the job. I do however, wonder if it lasts? We've all glued bits back on, that have fell off our models, just from age alone? You would have to carefully replace it, so as not to upset the paint?
13 October, 00:20
Alexander Grivonev
Hey Bozzer, I first used this method on the 964 Carrera 2 I finished earlier this year:
Porsche 964 Carrera 2 *Velvet Red Metallic* | Album by Alex G. (1:24)
The "Carrera" emblem which is a PE part is firmly attached. If I wipe with my finger over it or even pick on it with my fingernail it doesn't move. Seems like the glue solidified over time and the bond became even stronger. My gut feeling tells me not to worry too much about the parts "falling off".
Hey Bozzer, I first used this method on the 964 Carrera 2 I finished earlier this year:
Porsche 964 Carrera 2 *Velvet Red Metallic* | Album by Alex G. (1:24)
The "Carrera" emblem which is a PE part is firmly attached. If I wipe with my finger over it or even pick on it with my fingernail it doesn't move. Seems like the glue solidified over time and the bond became even stronger. My gut feeling tells me not to worry too much about the parts "falling off".
13 October, 07:38
Spanjaard
I have a bottle of the product, never actually used it, always thought that it was just PVA glue in a much smaller bottle..... but certainly seems to work in this case
I have a bottle of the product, never actually used it, always thought that it was just PVA glue in a much smaller bottle..... but certainly seems to work in this case
13 October, 09:46
Robert H.
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
41 11 October, 17:11
Neuling
Excellent work. Inspiring details to see here. Reason to keep on modelling! 🙂
Excellent work. Inspiring details to see here. Reason to keep on modelling! 🙂
12 October, 09:00
Marcin Dudek
Holly smokes, I can't takę my eyes off all those cool details. Greate job 👏
Holly smokes, I can't takę my eyes off all those cool details. Greate job 👏
13 October, 09:45
luc1959
Hallo Carsten,
Ich habe gerade die 30 euro via PayPal ueberwiesen.
M.fr.Gr,
Luc Vanspringel
Wapenstilstandlaan 33
2600 Berchem
Belgien
Ich habe gerade die 30 euro via PayPal ueberwiesen.
M.fr.Gr,
Luc Vanspringel
Wapenstilstandlaan 33
2600 Berchem
Belgien
13 October, 09:45
Kostas P.
bu öğeyi istiyor
bu öğeyi istiyor
F-111F - cockpit early modification with 3D decals (Hasegawa) (3D Printed)
ResKit 1:72
RSU72-0211 13 October, 09:41
Marcin Dudek
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
4 14 January 2023, 19:09
Marcin Dudek
What is better than a pair of Colonial Marines? More Colonial Marines!
What is better than a pair of Colonial Marines? More Colonial Marines!
13 October, 09:33
Snort
bu öğenin sahibi
bu öğenin sahibi
Krupp Protze 1 ton (6x4) Kfz.69 Towing Truck with 3.7cm Pak
Tamiya 1:35
35259 2003 Yeni parçalar Çok konu (3)13 October, 09:28
/tr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=tr
35
35
/tr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo