Haber akışı
Paul Cadwell
bu öğenin sahibi
bu öğenin sahibi
Chaparral 2J 1970 Can-Am Laguna Seca No. 66 Vic Elford
Model Factory Hiro (MFH) 1:12
K-840 2024* Yeni araç 20 July, 20:08
Dan Laspa
bu öğeyi istiyor
bu öğeyi istiyor
F-16 Fighting Falcon NSI "Smallmouth" One-piece intake for Tamiya
Gloria Model 1:48
GR48601 2024 Yeni araç 20 July, 20:08
Ronan
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
61 19 May, 16:00
Daniel Mysak
Nice start👍. Looking forward to your build. I´am curious to see the pros and cons of the kit.
Nice start👍. Looking forward to your build. I´am curious to see the pros and cons of the kit.
24 May, 09:05
Oleg Bogolei
I didn't dare to cut main weels bays, I just swore loudly at Trumpeter)
And there are some other remakes need to be done to make "A' from this model...
I didn't dare to cut main weels bays, I just swore loudly at Trumpeter)
And there are some other remakes need to be done to make "A' from this model...
24 May, 13:25
Ronan
Many thanks , mates 😉
For those who wish to assemble this model, it will be necessary to plan a little surgery on the main landing gear bays.
Other than that, I will say that the kit is better than Italeri or Fujimi but that's just my opinion. The level of detail is much higher than the other two
Many thanks , mates 😉
For those who wish to assemble this model, it will be necessary to plan a little surgery on the main landing gear bays.
Other than that, I will say that the kit is better than Italeri or Fujimi but that's just my opinion. The level of detail is much higher than the other two
24 May, 15:19
Ronan
Maybe a little more information about the different versions of A-6 :
tailspintopics.blogs..-vs-6e-intruder.html
Maybe a little more information about the different versions of A-6 :
tailspintopics.blogs..-vs-6e-intruder.html
24 May, 15:25
Juergen Klinglhuber
Jaw dropping detailing -as usally! All looks so easy and still perfectly clean and we all know how hard this is (especially in 72) - great job!
Jaw dropping detailing -as usally! All looks so easy and still perfectly clean and we all know how hard this is (especially in 72) - great job!
31 May, 15:51
Ronan
Many thanks,
For the moment, I don't find any difficulty in building this kit.
I only used putty in the air intakes, the fitting is quite good
Many thanks,
For the moment, I don't find any difficulty in building this kit.
I only used putty in the air intakes, the fitting is quite good
31 May, 19:11
Ronan
Thanks Alek 😉
Dearest readers,
For those who would like to build this model but are not happy about having to open the gear hatches, you should know that these famous hatches can be closed on the ground. Yesterday, I found a photo which attests to the thing in the book "lock on" by Verlinden. These hatches are closed manually by the ground mechanics during a prolonged stop of the plane, a sort of storage, this avoids FOD. Of course, this is very rare, but nevertheless it is possible. Also, it's up to you 😉
Thanks Alek 😉
Dearest readers,
For those who would like to build this model but are not happy about having to open the gear hatches, you should know that these famous hatches can be closed on the ground. Yesterday, I found a photo which attests to the thing in the book "lock on" by Verlinden. These hatches are closed manually by the ground mechanics during a prolonged stop of the plane, a sort of storage, this avoids FOD. Of course, this is very rare, but nevertheless it is possible. Also, it's up to you 😉
10 June, 17:42
Patrick Hagelstein
Thanks for the encouragement Ronan! Let's have a look at references then. ☺️👍🏼
Thanks for the encouragement Ronan! Let's have a look at references then. ☺️👍🏼
10 June, 18:29
RobiModel
bu öğeyi istiyor
bu öğeyi istiyor
Star Trek U.S.S. Enterprise NCC-1701-C With Battle Damage Decals
AMT 1:1400
AMT721 2012 Yeni çıkartmalar 20 July, 20:06
RobiModel
bu öğeyi istiyor
bu öğeyi istiyor
Star Trek The Next Generation
Romulan Warbird D'deridex Class Battle CruiserAMT 1:3200
1125 2019 Yeni kutu 20 July, 20:05
Mark Sherwood
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
8 Görüntüler
And then there were two, too.Yeni: 20 July, 18:54 1:48
proje: And then there were two.
Scratchbuilt
3 20 July, 18:53
John
Fantastic build and presentation Mark. 👍 I love the display base with the mottled/splinter colors of each aircraft too. I'm still sticking with Tamiya paints though... 😉
Fantastic build and presentation Mark. 👍 I love the display base with the mottled/splinter colors of each aircraft too. I'm still sticking with Tamiya paints though... 😉
20 July, 19:06
Mark Sherwood
Thanks John. I've got say even though I've just become a Fanboy of AKRC there's still a place in my heart for Tamiya Paints, they were a vast improvement over the Humbrol tinnies back in the mid to late seventies as where the kits over Airfix. 🤘🥸🤟
Thanks John. I've got say even though I've just become a Fanboy of AKRC there's still a place in my heart for Tamiya Paints, they were a vast improvement over the Humbrol tinnies back in the mid to late seventies as where the kits over Airfix. 🤘🥸🤟
20 July, 19:38
Jason Marson
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
16 29 June, 23:32
Jason Marson
Thanks Alberto. There's a few corrections to be made as the masks are not 100% accurate but overall I'm pleased with the result.
Thanks Alberto. There's a few corrections to be made as the masks are not 100% accurate but overall I'm pleased with the result.
30 June, 11:36
Daniel Mysak
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
14 Görüntüler
RF-8A Crusader - wipYeni: 20 July, 19:55 1:72
Cockpit is finished so far, some details were added and the nice resin seat from the kit and the great pilot from Reskit...
20 23 June, 09:58
Martin Oostrom
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
9 16 June, 18:26
Martin Oostrom
I spent a couple of hours cleaning up some parts that I cut of the frame
I spent a couple of hours cleaning up some parts that I cut of the frame
22 June, 18:33
Bozzer
These curbside chassis, really upset me. Just like the Volvo VN. If the manufacturer, went to the trouble, of making an engine, and separate frame parts, with other kits, then why would they cheap out, on kits like these? I love what you're doing with this though. Keep the pictures coming, buddy 👍
These curbside chassis, really upset me. Just like the Volvo VN. If the manufacturer, went to the trouble, of making an engine, and separate frame parts, with other kits, then why would they cheap out, on kits like these? I love what you're doing with this though. Keep the pictures coming, buddy 👍
22 June, 19:35
Martin Oostrom
I didn't put up pictures of all the cutting and sanding. A summary:
All parts are cut, sanded and glued where possible. Only a few drops of filler were needed.
The cab consists of 10 parts that need to be positioned just right. **** job, but I think I managed.
Next up: Primer.
I didn't put up pictures of all the cutting and sanding. A summary:
All parts are cut, sanded and glued where possible. Only a few drops of filler were needed.
The cab consists of 10 parts that need to be positioned just right. **** job, but I think I managed.
Next up: Primer.
18 July, 09:20
Martin Oostrom
And primer is on after a monster session. 200ml primer + 50ml SLT = just enough.
Primer is zero paints grey. But a dirty grey.
And primer is on after a monster session. 200ml primer + 50ml SLT = just enough.
Primer is zero paints grey. But a dirty grey.
18 July, 16:16
Martin Oostrom
Tamiya Bright Red for the chassis and Zero stone grey as main colour for the interior
Tamiya Bright Red for the chassis and Zero stone grey as main colour for the interior
19 July, 13:51
Martin Oostrom
The Zero stone grey was a bit depressing, so I mixed a batch 50/50 with white to lighten things up a bit.
Tamiya aluminium was airbrushed, and Tamiya black as well.
Done with airbrushing for now. Letting the paint cure before decalling.
The Zero stone grey was a bit depressing, so I mixed a batch 50/50 with white to lighten things up a bit.
Tamiya aluminium was airbrushed, and Tamiya black as well.
Done with airbrushing for now. Letting the paint cure before decalling.
20 July, 14:19
Johan van Meerloo
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
15 9 May 2023, 21:16
Johan van Meerloo
both are interesting, this one is total crap but will try to make the best of it
both are interesting, this one is total crap but will try to make the best of it
28 April, 17:11
Johan van Meerloo
for the crap kit it is, its going on quite okay now with some colour on it at least, hopefully the cannopy wont ruin it all due to the bad kit
for the crap kit it is, its going on quite okay now with some colour on it at least, hopefully the cannopy wont ruin it all due to the bad kit
20 July, 07:12
Skyhiker
I would have sanded those rivets off and reriveted both planes. But I can understand not doing that. Getting raised rivets to look good in silver is a real challenge.
I would have sanded those rivets off and reriveted both planes. But I can understand not doing that. Getting raised rivets to look good in silver is a real challenge.
20 July, 19:52
KILLBaddy
bu öğenin sahibi
bu öğenin sahibi
Refugees, March 2022 Kit no. 5 (Russian-Ukrainian War series)
Master Box (MB) 1:35
MB35228 2023 Yeni araç 20 July, 19:51
KILLBaddy
bu öğenin sahibi
bu öğenin sahibi
Bundeswehr
SPz Marder 1A2 mit Panzerabwehrsystem Milan Tamiya 1:35
35162 (162, MM-162) 1993 Yeni parçalar 20 July, 19:48
/tr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=tr
35
35
/tr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo