Haber akışı
Stephan Fässler
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
20 21 June, 18:01
Nicolas
Oh, a kit from my favorite area of interest. I'm in. Great start with the instrument panel.
Oh, a kit from my favorite area of interest. I'm in. Great start with the instrument panel.
10 July, 05:35
Michael Kohl
Like the plane and the livery you are going for.
My two cents on one or two aspects: I found the brass undercarrige and the cockpit section you listed as aftermarket pretty useless. The undercarriage doesn´t solve the problem to ease the alignment of the landing gear and the cockpit section doesn´t provide any better detail than the kit parts. I set both aside and rescribed the soft outlines of the cockpit doors. Pouring transparent resin into the cabin windows gave a nice flush appearance. You may consider that.
Good luck with your build. I will follow with keen interest.
Like the plane and the livery you are going for.
My two cents on one or two aspects: I found the brass undercarrige and the cockpit section you listed as aftermarket pretty useless. The undercarriage doesn´t solve the problem to ease the alignment of the landing gear and the cockpit section doesn´t provide any better detail than the kit parts. I set both aside and rescribed the soft outlines of the cockpit doors. Pouring transparent resin into the cabin windows gave a nice flush appearance. You may consider that.
Good luck with your build. I will follow with keen interest.
10 July, 07:54
Stephan Fässler
Thanks Michael and Nicolas. As my second kit to build, I thought I spice it up a bit with some aftermarket stuff, indeed, the new cabin with the new windows gave me some head scratching as to how install it, then figured it eventually out. My alignment looks a bit messy and I hope u can make it look aligned with putty etc… so far my opinion as an inexperienced builder is that you could safely leave it stock, as is….
I did not come yet to the brass parts and hope it will be better with these parts. Let's see 🙂
Thanks Michael and Nicolas. As my second kit to build, I thought I spice it up a bit with some aftermarket stuff, indeed, the new cabin with the new windows gave me some head scratching as to how install it, then figured it eventually out. My alignment looks a bit messy and I hope u can make it look aligned with putty etc… so far my opinion as an inexperienced builder is that you could safely leave it stock, as is….
I did not come yet to the brass parts and hope it will be better with these parts. Let's see 🙂
10 July, 08:07
Thomas Kolb
I am happy to take a seat! I personally find red liveries extremely difficult to pull off, so I am watching with great interest!
I am happy to take a seat! I personally find red liveries extremely difficult to pull off, so I am watching with great interest!
10 July, 08:54
Łukasz Gliński
Following this challenge.
The Aerocraft cockpit will require a lot of sanding, but the original windshield is definitely too narrow - been there, done that 🙂
Following this challenge.
The Aerocraft cockpit will require a lot of sanding, but the original windshield is definitely too narrow - been there, done that 🙂
10 July, 11:15
Zbynek Honzik
Taking a seat. And fingers crossed that the strength and motivation will last until successful completion!
Taking a seat. And fingers crossed that the strength and motivation will last until successful completion!
16 July, 19:31
Stephan Fässler
Calling it complete for now.
Overall I enjoyed this kit, tricky to paint the red stripes and the nose was not properly done.
As a beginner I probably would not recommend the cockpit mod unless you have the proper tools, which I was missing sometimes 🙂
This was brush painted and spray can paint from revell I purchased with the kit to get started, meanwhile upgraded my collection with Mr Hobby and MRP. Revell is just awful for airbrush and mediocre for brush painting, but then again, I am no expert.
Unfortunately the „twotter" has some slight tilt, one of many mistakes happened during the build, but I'm happy I did not have to bin the whole thing 🙂
Cheers and onwards to the next one. You may deboard now…
Calling it complete for now.
Overall I enjoyed this kit, tricky to paint the red stripes and the nose was not properly done.
As a beginner I probably would not recommend the cockpit mod unless you have the proper tools, which I was missing sometimes 🙂
This was brush painted and spray can paint from revell I purchased with the kit to get started, meanwhile upgraded my collection with Mr Hobby and MRP. Revell is just awful for airbrush and mediocre for brush painting, but then again, I am no expert.
Unfortunately the „twotter" has some slight tilt, one of many mistakes happened during the build, but I'm happy I did not have to bin the whole thing 🙂
Cheers and onwards to the next one. You may deboard now…
6 August, 17:23
Jason Sizemore
bu öğenin sahibi
bu öğenin sahibi
3rd Fallschirmjäger Division + King Tiger Henschel Production Ardennes 1944 Part 1
Dragon 1:72
7361 2008 Yeni parçalar Çok konu (2)6 August, 17:22
William Adair
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
40 29 May, 11:47
TH SCALE MODELS (Thomas Haberl)
That is art! I have to take a first row seat here and see the progress. Very impressive 👍
That is art! I have to take a first row seat here and see the progress. Very impressive 👍
29 May, 13:26
Michael Kohl
Surely another build that will leave me speechless and striving to come closer to this level.
Surely another build that will leave me speechless and striving to come closer to this level.
30 May, 10:32
William Adair
Omg thanks everyone. You guys are the best! I'm interested to see how this one comes out. I'll add more progress soon. 🤞
Omg thanks everyone. You guys are the best! I'm interested to see how this one comes out. I'll add more progress soon. 🤞
31 May, 04:45
Ludvík Kružík
I like old planes from the early days of aviation. Your scrathbuild is fantastic. I admire how you can render all the little details in this scale. I wish you continued success in building this model and look forward to the sequel.
I like old planes from the early days of aviation. Your scrathbuild is fantastic. I admire how you can render all the little details in this scale. I wish you continued success in building this model and look forward to the sequel.
31 May, 08:49
Bruce Huxtable
Your talents are beyond my comprehension.... Totally amazing scratch building 🙂 This little gem is already gorgeous🙂
Your talents are beyond my comprehension.... Totally amazing scratch building 🙂 This little gem is already gorgeous🙂
31 May, 17:16
William Adair
Hi Michael, I'm not sure. It should be out by then but I don't know if any sellers will be stocking it. I live in Australia unfortunately, so Telford is well outside my maximum range 😢
Hi Michael, I'm not sure. It should be out by then but I don't know if any sellers will be stocking it. I live in Australia unfortunately, so Telford is well outside my maximum range 😢
11 June, 22:42
William Adair
Added the large control wheel to the pilot's cockpit from soldered wire and heat curved sprue. I like the little brass hub in the middle 🙂
Added the large control wheel to the pilot's cockpit from soldered wire and heat curved sprue. I like the little brass hub in the middle 🙂
15 June, 09:52
Skyhiker
You seem to have really good control over your soldering. What tools do you have? That control wheel is impressive.
You seem to have really good control over your soldering. What tools do you have? That control wheel is impressive.
15 June, 16:59
William Adair
@Skyhiker I have an inexpensive soldering iron from an electronics store. It is nothing special, but the best thing I have is liquid soldering flux. Using that allows the solder to grab the surface and stick without requiring too much heat or flooding the area with solder.
@gorby Being a jeweller helped at first. But now I am finding that the modelmaking is helping me be a better jeweller! 👍
@Skyhiker I have an inexpensive soldering iron from an electronics store. It is nothing special, but the best thing I have is liquid soldering flux. Using that allows the solder to grab the surface and stick without requiring too much heat or flooding the area with solder.
@gorby Being a jeweller helped at first. But now I am finding that the modelmaking is helping me be a better jeweller! 👍
23 June, 12:51
William Adair
Wow, thank you Alec! Hopefully it will be in your mailbox soon 🙏
I added a few more pics. Test fitting the undercarriage and one of the prototype wheels.
Wow, thank you Alec! Hopefully it will be in your mailbox soon 🙏
I added a few more pics. Test fitting the undercarriage and one of the prototype wheels.
7 July, 14:38
Christian Bruer
Outstanding craftsmanship. I really like your tiny scratch built projects 👍
Outstanding craftsmanship. I really like your tiny scratch built projects 👍
7 July, 19:55
Michael Kohl
Me too.
But obviously he doesn't show how he did the wheels to prevent us from fainting. 😉
Me too.
But obviously he doesn't show how he did the wheels to prevent us from fainting. 😉
7 July, 20:03
Skyhiker
I just don't get how its possible. Really man, you need to get a life or something. This shit is just way too good!
I just don't get how its possible. Really man, you need to get a life or something. This shit is just way too good!
7 July, 21:16
Mr D
Wow, what scale👌, l struggle to build a 1:72 without breaking of a tail wheel or antenna 🤣.
Really nice n interesting subject 👍👍
Wow, what scale👌, l struggle to build a 1:72 without breaking of a tail wheel or antenna 🤣.
Really nice n interesting subject 👍👍
7 July, 23:13
William Adair
@Michael Kohl, I made an album about the wheel back in January, showing the stages of construction. Spoked wheel test, 1/144 | Album by F_IV
@Skyhiker, Windsock Datafiles provide the best drawings. I also use the 3-view drawings from the Wingnut Wings kit for some areas.
@Michael Kohl, I made an album about the wheel back in January, showing the stages of construction. Spoked wheel test, 1/144 | Album by F_IV
@Skyhiker, Windsock Datafiles provide the best drawings. I also use the 3-view drawings from the Wingnut Wings kit for some areas.
8 July, 04:09
Zbynek Honzik
A masterpiece is being created here!!! Scratchbuild at this scale and this quality! Unbelievable! Bravo! 👏👏👏
A masterpiece is being created here!!! Scratchbuild at this scale and this quality! Unbelievable! Bravo! 👏👏👏
8 July, 06:32
bughunter
Great progress 👍
I have a kit in 1:48, but your build looks much better and has more details!
Great progress 👍
I have a kit in 1:48, but your build looks much better and has more details!
8 July, 16:34
William Adair
Thank you, it's slowly coming along. Adding more details now that the main components are painted. It's always my favourite part of a build. 🙂
Thank you, it's slowly coming along. Adding more details now that the main components are painted. It's always my favourite part of a build. 🙂
6 August, 12:41
Kim Harris
Hello all. I am looking for a Hercules 1/144 model kit. The only one I have found so far is the Academy kit (1/144 C-130J-30 Super Hercules, 1999-present 1263). I have no experience of Academy kits and there seem to be no reviews on here. It's a relatively cheap kit so I am wondering it is really old and basic. Judging by the instructions I have downloaded, it seems fairly basic.
Does anyone have experience of this kit or Academy kits in general? TIA.
Does anyone have experience of this kit or Academy kits in general? TIA.
6 August, 17:06
Treehugger
No idea. I am guessing any Academy Hercules kits, are re-branded kits from older molds, from Minicraft. I think Hasegawa has some 1:200 kits, but different scale, and might be mostly Japanese stuff.
No idea. I am guessing any Academy Hercules kits, are re-branded kits from older molds, from Minicraft. I think Hasegawa has some 1:200 kits, but different scale, and might be mostly Japanese stuff.
6 August, 17:20
Dave Smith
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
43 Görüntüler
Academy M10 GMC 80th Anniversary 1944Yeni: 6 August, 17:18 1:35
proje: M10 GMC 70th Anniversary
9 9 July, 19:00
Duster_d
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
5 Görüntüler
Fokker F-VIIB/3M "Southern Cross" (FROG/NOVO/Zvezda)Yeni: 6 August, 17:04 1:72
Take two. Primer again. An attempt to repaint it in a lighter blue color failed. The "Zvezda-ACR" paint is crap.
5 3 August, 12:11
Konrad Oskarsson
bu öğenin sahibi
bu öğenin sahibi
German Motorcycle Rider with a pig WWII
Legend Productions 1:35
LF0029 6 August, 17:02
/tr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=tr
35
35
/tr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo