Haber akışı

Treehugger
Charming subject with that peculiar looking engine setup. 🙂

Treehugger
I wonder, how long is the model in cm's?

Paul
Didn't really measure but should be some 34 cm

Guy Rump
Excellent modelling of a very impressive aircraft. 👍

Paul
Thank you! By now it has already been a couple of years since i build this plane but it is still one of my favorites, both because the Do-26 has such gracious shapes and because the model itself took so much work to turn into something presentable.

Transall NG
Very nice work !
I was about to ask which kit it was before reading below it was the Amodel one : i kept my Mach 2 after serious study... I'm presently trying to finish my Amodel Li-2, and as you wrote, it is a very good school to learn how to deal with unexpected problems !!
I like very much this Dornier, thank you for having built this one. 🙂

Alec K
Taking a seat. Superb progress 👍

S B
Das sieht schon sehr gut aus! Bin gespannt auf mehr!

Mirko Römer
Ich bin dabei - jetzt wird's eng...

Łukasz Gliński
Me 4, maybe it will prompt me to start mine?

Skyhiker
I too have a Storch in the stash. Good luck with yours.

Michael Kohl
Count me in as well.

komoras
Following!
Are you also planning to make one wing folded?

Daniel Mysak
Thanks for following guys👍!
@komoras
No, the kit is not that detaild to give you an easy possibility to fold the wings.

Skyhiker
For a relatively new kit I am surprised on how much flash and fitting issues this kit has.

Skyhiker
It's really hard for me to fight off the urge to correct the structural issues with this kit. But I promised myself I would make this one out of the box.

Patrick Hagelstein
I've seen that promise before Skyhiker! 😂 Good luck keeping this one OOB! 😉👍🏼

Skyhiker
I really hate Revell conopys.

Sergio Ordonez
Mate, I think you should put the windshield uspside down. The ángel does not cope with the real one as I see on photographs.

Skyhiker
Unfortunately it looks even worse the other way around. The idiot engineers at Revell should be fired.

Sergio Ordonez
Well, I had some work with French engineers and I know shit happens. Could you take a photo with this one in the other position?

Sergio Ordonez
drive.google.com/fil..J9/view?usp=drivesdk
The windshield is not an isoscelles triangle so the windshield has not a 45 degree ángel over the capot. Please, see these example of a TA-152 (and please, mind It is 35 years old and I was only 13 when I drestroyed It).
I think an easy solution can be made. I do not want any mate to be anoyed by an engineering issue. I had them everyday (it's my job, Factory engineering problem solving, known as 'shit managing") and It can destroy your mojo.

Ben M
What a terrible canopy

Skyhiker
After several hours of sculpting I got the canopy to fit better. I will continue with it tomorrow.

Sergio Ordonez
Your mojo works, mate! Now you have became a great problem solver!
On the other hand, I think another 3D engineering guy needs to stop drinking and 20 years of 2D drafting. The fitting is worse than I could imagine. But I see is no a problem for a seasoned mate like you. Great work, mate!

Nicolas
Following. I build this kit several times in older versions. The fit of the canopy is realy sh*t. My solution was (with about 10 years) to sand the backside of the windshild till it fitted. Of corse so most of the frame is missing.

Thomas Kolb
What a struggle! It reminds me of some Heller and Amodel kits. But it looks that you manage to coax it into shape!

J35J
Great effort and progress! 👍🏻

Skyhiker
Sergio the TA 152 had a very different canopy than the 190. The 152 was designed for high altitude flying, was pressurized and had double panes.

Sergio Ordonez
Thanks you, Skyhiker: I think I can remember now, as I researched about FW190 and TA152 black in the 90's. Also, canopy is bubble-shapped. Sorry, my FW190 Mustang have been gone forever, I expent the night trying to find It, just to find my solution, but I think only the reta of the TA152 has survived.

Mr D
You done a better job of the seat belts than l did 🤣. The cockpit glass on my model was not very clear!
Looking good, ... Thanks for uploading 👍👍👍

Skyhiker
Mr D did you also have so much trouble with the canopy? I read in the kit review at the bottom of the page that it was bad. I really wish the reviews would be moved up because I always forget about them. It took me quite a while to get the canopy to work. It needed a lot of reshaping to look right.

Skyhiker
I decided to make my own blueprint for this plane. So, that's taking up a lot of my time at the moment.

Mr D
Hi, yes l had trouble too, l did a dry fit before paint, and l had to take a combination off the glass n some off fuselage, and had to use a bit of UV clear resin.
I got it to fit in the end, but it's not very clear to see through.
I had a bit missing of my engine fan too, had to make it up with super glue gell.

Alexander Grivonev
Built one too back in the day, the nightfighter version. Speaking of the canopy, I like how the rear part of it is just molded to the fuselage 😄. Used some other canopy I found in my spares because the one from the kit was entirely unusable.

Mr D
Looking good 👍👍
It's a nice model when it's finished once you sort the shortcomings out.
I did get my prop to spin in the end....had to do alot of work to the cooling fan to make it run smoothly.
Good luck on next steps 😃👍

Skyhiker
If I had thought it would have been a problem I would have dry fitted everything first. But I wanted to keep the parts on the sprue for painting. It wasn't worth messing up the paint job just to get the propeller to spin. Especially since the contact points were so fragile. So in the end I glued it together so it will be stable.

Skyhiker
Working out the fuselage patterns today.

Mr D
Looks good 👍👍

Guy Rump
Looking good. 👍

Mr D
Nice to compare the two.
👍

Skyhiker
I got the legs and nose on and painted the exhaust today.

Villiers de Vos
Very nice progress. Phenomenal paint work.

Skyhiker
I got the decals on today.

Mr D
Nicely done.....looks good now 👌👍👍
You managed to get a correct decal for the tail.... Better.
You got it very close to box art.

Skyhiker
Thanks Mr D.

Mr D
On the fiddly bits... Did you decide to make your own part for that Whip shaped thingy🤣 don't know what it actually is 🫣.... ?
Quite a few little fragile bits on the bottom... I was extremely cutting n sanding these.
Like the way the guns are visible through wheel well's👍

Skyhiker
Mr D, the Morane antenna I built by filing down a wooden toothpick and super gluing a hog's hair on to it that I got from a cheap brush. The kit part was ridiculously out of scale. I use this hog's hair method for whip antennas and static dischargers because the hair is flexible enough that it won't break off.

Mr D
AHH thanks it's Antenna 👍 be better with bit of flexibility... looks more accurate to photos as well.
I noticed HB do a Ta-152 kit....looks quite good for price.. bit of PE in kit.
I was tempted.....but promised myself l will build one buy one 🙄🤣.

Skyhiker
Lol. I promised myself the same thing and the next week someone offered me their entire stash of 45 kits for super cheap, which I bought immediately.

Mr D
🤣... Keep you out of trouble for a while.

Ben M
…. Goes to look at SH's stash …

Nicolas
Beautiful result. 👍

Nicolas
Following

Skyhiker
I'm in!

Dave Flitton
Watching!!

Skyhiker
Please let us know when you upload new photos. I don't want to miss anything.

Ogre-Trombone
I found some time to work on these kits, so here are some new photos. Thanks for following!

Nicolas
The instruction isn't mentioning the stand at all. As the torpedo is under the COG I would try to fix it to the torpedo.
Very nice progres so far. 👍

Ogre-Trombone
Leaning that way, Nicolas. I don't like it, but that's probably what I'll need to do.

Mr D
Nice model 👌
Was the Devastator similar to the Dauntless??
Like the subject....will be watching 😃👍

Ogre-Trombone
@Mr D, the Devastator was a pre-War torpedo bomber that was one of the most advanced aircraft of its time. Unfortunately. it was already obsolete at the start of the war. It was slow and underpowered, and early-War tactics left its crews extremely vulnerable.

Skyhiker
The Douglas TBD Devastator, was the U.S. Navy's main torpedo bomber. It was introduced in 1935, but was obsolete by 1939. They were replaced with the Grumman TBF Avenger.

Mr D
Thanks for the info
Ogre & Skyhiker 👍👍
I didn't know much about them, the pre-war yellow wings are smart scheme 👌

Mid Franconian
Great project!

Guy Rump
Looking great, following. 👍

Casey Beckett
Great idea, the foam/tape /white glue - I'm stealing this!

Mr D
Both coming along really nicely now, the flap lines look a lot better now.
Looking like all the build updates.
Good luck with next steps 👌😁👍👍

Ogre-Trombone
Thanks, Mr D. I'm trying not to let the asymmetry bother me on the black-primed model. I wish I'd made a template or measured them instead of trying to follow the old panel lines. Still, I'm glad I made the effort.

Pure improvisation, Casey! It seems to be holding up so far. I want to do open or partially-opened canopies, so it didn't make sense to glue them in place, which is what I usually would have done.

Ogre-Trombone
It's very hot and dry where I am right now, and the paint isn't responding the way I'd like. I'll have to come back when conditions are better.

Mr D
Your doing a 👍 job, All the hard work will pay off, nice project 👍👍

Ogre-Trombone
Painting is done. Now it's on to clear coat and decals.

Guy Rump
Coming along very nicely! 👍

Skyhiker
Wow looks great

Mr D
Looks good 👌
Nice colours, the wing surface doesn't look to easy to mask.
Coming along nicely 👍👍

Gary Victory
Lovely work Orge.

Mid Franconian
They look sooo cool!

Skyhiker
I'm impressed on how well you work even with those raised elements. They look fantastic.

Mr D
^^^^^^Good job on decals^^^^^
Impressive aircraft 👍👍

Landlubber Mike
Fantastic work!

Villiers de Vos
Fantastic work so far.

Ogre-Trombone
I've been using Microsol, Tamiya Mark Fit and Mark Fit strong in a makeshift rotation to get the roundels to settle in. My patience is generally being rewarded, but every time I reapply the old bubbles settle down but new ones seem to appear. Does anyone know if this is caused by a chemical reaction? They are settling in, eventually, but I suspect the solutions are both working and making more work for me at the same time.

Ogre-Trombone
Aside from a few finishing touches, like adding antenna wires and mounting them on their stands, these builds are finished. When I came back to the hobby a few years ago, these Devastator kits were among the first I bought. I have very fond memories of building the classic 1/48 Monogram kit, and I've always loved this airplane. I'm very happy with how they've turned out. I'll post some better photos later this week. Thanks for following!

Haro Rotl
What works for me with stubborn decals is a mixture of softener and decal glue. I apply softener on a piece of decal cutting (usually thrown away, but the water-soluble glue is on the entire sheet), stir the brush a bit, and then apply the mixture to the stubborn spots of the decal, having cut the bubble with a sharp blade before. Doesn't always work the first time, but work it does. (Decal glue is also separately available from Tamiya, I use that now.)

Haro Rotl
This is a fascinating album, and a great result to your efforts!
I built the Airfix Devastator as one of my very first kits (i.e. some 50 years ago), but haven't had the heart to start another one since. Great to watch these grow, and the result!

Ogre-Trombone
Thanks, Haro. That's a good tip. I tried Micro Set decal fixing solution, but I honestly think it's just a more dilluted version of Micro Sol and not really an adhesive. I'll try that next time.

Curatorm
Very nice work!

Guy Rump
Great job (s) 👍

Mr D
They turned out great 👌 l like the peace time yellow colored one, they are both great, canopy's are done well.
Enjoy watching build 😁👍

Casey Beckett
Great work! That old airfix CAN be brought to a nice build. You've inspired me to do another.

Ogre-Trombone
Thanks so much, guys. This was a really satisfying project.

J35J
Great builds and build log! Congrats👍🏻

Łukasz Gliński
Outstanding job 👍 They look great in these two "camos"

Neuling
Same as J35J and Lukasz.

Nicolas
Great result. 👍

Gary Victory
Really nice builds. Top Job.

Ogre-Trombone
Just uploaded some more photos... Thanks again for following!

Mid Franconian
They look soo great! Congratulations!

Neuling
👍

Villiers de Vos
Fantastic work.

Skyhiker
They look good on those stands. Congratulations.

gorby
Nice work Kesa.

Kesa Tiho
Thanks, gorbs

Rui S
A Beauty 👍

Alec K
Well done!

gorby
Excellent!

DerMattes
Watching 👍

Transall NG
So, let's see what color you choosed for the rear fuselage reich defense band !
Good luck !

Andrea Brenco
KG(J) 6 red and black checkered fuselage band!

Transall NG
Yes, this picture is the better one of this plane, and even if both colors look black, one can guess the separation.
Good luck !

Neuling
Beautiful colors!

Guy Rump
Lovely job! 👍

Łukasz Gliński
Very nice camo indeed.
Any comments on the kit's fit? I've seen various reviews.

Vincent
I heard that this is not a easy kit. Great result!

Johan DN
@Neuling
Good old Humbrol 40+ years bottled in a small tin 🙂

Johan DN
@Łukasz Gliński
Fit is not spectacular :-/ Clear parts don't fit well. Lot of room for detailing (but I'm not that kind of modeller). All by all, fun to build.

Johan DN
@Neuling
It's in the middle. You have to take your time. Instructions aren't always very clear.

Robert Podkoński
Fantastic job on this demanding kit. Congrats!