Haber akışı

Nicolas
As soon as I finish one of my 3 current projects (2 of them ar nearly done) I will start with this little helicopter.

Nicolas
The build startet this weekend.

Nicolas
As I am covid positive (fortunately only with very mild syntomas) I had some time to build again today. So far I am positively surprised by the accuracy of fit. There are no locator pins, but I can now click the fuselage and cockpit together and even the tail section holds without glue.

Nicolas
I would like to do some rivets on the exteriour, but I couldn't find some good drawings. If somebody has a hint I would be grateful.

Nicolas
Today I started installing the controls. Doing so I noticed, the collectiv controls are missinh in the kit. So I started scratchbuilding them after photos. Also fabricated and installed blinds for the paxes.

Nicolas
Started some work on the exteriour.

Freak
Interesting project! Love the WIP pics and demo of various detailing techniques.

Nicolas
Hi Freak, welcome on board.

Shar Dipree
I have the same kit too. I'm really looking forward to your results. Following. 🙂

Nicolas
Hi Shar, welcome.

Łukasz Gliński
Cool, will watch. Still afraid to start mine 😄

Nicolas
Welcome Łukasz, there is no reason to be afraid. The fit seams quite good, and the missing details is somthin one can improve. 😉

Qwertzel
Sieht gut aus! Nehme auch mal Platz

Nicolas
Moin Quertzel, Danke für das Lob. Noch sind Sitze im Hubschrauber frei. 😉

bughunter
The Colani design is cool 👍 Have fun!
And I hope your covid is gone without bad effects!

Nicolas
Hi Bughunter, thanks.
Covid wasn't to bad, I got 3 day with mild syntomas and 5 days waiting for a negativ test. 😉

Mr D
Done some nice improvements Nicolas... Be worth it, it's good to do this as puts a nice personal touch on it, l need to pick up some card like you have used ( what is it l need to look for ?)
The 2 Revell models l built ...l found the decals took a bit more softening than others models l have done!? the decals said made in Italy....no company name.
Looking good 👍 be nice bright unusual one this 😁

Pepe
Looking.

Nice job!!

Ben M
Watching!

gorby
Very nice work so far.

Florian H.
Da schau ich mal zu

Dave Flitton
Massive! where are you going to put it?

BAT21
Right next to my Mi-22 😉

Yellow 23 | Album by BAT21 (1:72)

Alec K
Another monster! I am in 👍

Nicolas
Ich nehm mir auch mal nen Stuhl.

BAT21
Welcome on board.

Thomas Kolb
Cool! This I just need to follow!

Robert Podkoński
Me too!

BAT21
I'm glad you're part of this project.

Robert Podkoński
I have uploaded a few photos of Polish Mi-6 before and after restoration here:
Once there was a collection | Album by podkon ; and here:
Polish Air Force Museum - Dęblin | Album by podkon. Perhaps you will find them useful.

BAT21
👍

Ekki
Watching.

Michael Kohl
BAT21 builds a chopper? Not without me!

BAT21
Thank you very much for your interest.

Pierre-Christian Baudru
Can't wait to see it finish !

Florian H.
Sehr schön, Gratulation zu diesem Ergebnis 👍

BAT21
Danke Florian.

Bernd Grün
Promising start. 👍🏻 Following with interest!

BAT21
It's nice that the audience seats are filling up.

Alec K
Solid progress 👍

Alexander Grivonev
Habe den Kit seit Jahren im Besitz, traue mich aber nicht ran. Was für ein Monster👍

BAT21
Wer bei der Tu 128 von Trumpeter alle Fehler in Perfektion beseitigt hat, muss sich nicht vor der Mi-6 fürchten.
Etwas Spachtelmasse und Schleifpapier bereitlegen... und schon kann es losgehen 😉

Alexander Grivonev
Ja das war wirklich eine Baustelle das Ding. Aber trotz des Ehrgeizes der Chinesen, dem Modellbauer auch den letzten Nerv zu rauben, sieht mir Amodel so auf den ersten Blick nach mehr Arbeit aus...

Gergő Takács
Wow! Very cool Project! I will take a seat! 🙂

Pierre Pierre
Following

BAT21
Feel welcome mates.

Michael Kohl
Starts to look like a Mil Mi-6? Well, then it's time to charge the teaser to a picture of your model. 😉

Juergen Klinglhuber
Joining in late, but sure worth it. Clean built on this "filling the gaps" giant. 👍

Treehugger
Q: The tiny "brass" colored tubes for the wiring on the main rotor head, are those bits of cut up syringe tips?

BAT21
For these parts I cut 0.5mm brass tubes from Albion Alloys.

Spanjaard
rotor head is truly impressive

Alec K
I agree, pimped to the hilt 👍

Casey Beckett
Recently discovered Albion Alloys here - lovely stuff!

BAT21
Many thanks guys, much appreciated.

CaptGPF
That rotor work is sick!
…but so is the PE cockpit work at this scale! Watching!

Alec K
Excellent progress 👍

Łukasz Gliński
On the pic #35 it looks professional, not provisional 😉

Florian H.
Sehr schönes farbspiel

BAT21
Many thanks 👍

Łukasz Gliński
Yes it is time 👍 Brilliant shading btw

Michael Kohl
Great finish

Erik
"So what do you think? Time to remove the masks from the windows?"
Yes! 👍 😉

BAT21
Thank you mates.
The self-cut masks on the side windows revealed a catastrophic picture after removal: something sticky remained on the windows... the hoped-for cover was also rather poor, the paint got under the masks at the edges. 🤬

Now I'll make a calming coffee and then try to repair it.

Alec K
Damn, that sucks. I had same experience on several builds, nothing some scraping and reapplication of Future can't fix.

Thomas Kolb
That's unfortunate, but maybe you can remove the tape residue with some IPA alcohol and cotton buds?

BAT21
I scraped everything off with a toothpick, more or less. Not the best result, but the model was able to avoid being thrown away.

Mr D
Very nicely done, great panel shading 👌 Brilliant 👍👍👍

Mr D
Nicely done 👍 Great panel shading 👌, Brilliant 👍👍

Guy Rump
A very good result, you wouldn't realise the issues you had. 👍

Spanjaard
seems you recovered pretty well from the problem, congratulations great result

Ekki
Very, very good chopper!
Well done.

Nicolas
Great result. 👍

BAT21
Thanks mates, much appreciated

Mr D
Is this the one from America Movie??
Looking good, keep up good work 👍👍

Stephan Fässler
Hi D, not sure which American Movie, probably 😉 they been around for ages
Cheers pal

Stephan Fässler
I tried my luck on the camo paint today. As you can see the brown paint was not properly done, I left out the masking which is a mistake.
What I am having an issue with is I can make thin lines with this 0.45 needle. It's the ULTRA from H&S.
I made certain the needle is not clogged, used two drops of flow improver over 10ml mr hobby and Ultimate thinner used 15Psi on finest airbrush setting. Need still more practice with it, anyone have some advice? I was on some strokes too stationary, hence the splashes 🙂
Will try to fix this in the next days…..
Thanks 😊

Mr D
Sorry the movie is called (Air America) with Mel Gibson, they are contracts pilots in Thailand for US government, They use the Peacemaker. Looking good 👍👍

Stephan Fässler
Thanks D, got it. Yes that's the same in the kit 🙂

Robert Podkoński
Taking a seat here.