EF-18M Ala 15 "Tranque"
Yorumlar
36 1 August 2023, 16:50
![](/profiles/img/113956-207-s.jpg)
At first i thought picture 11 and 12 are reference pictures but no, it´s still the model 🙂
2 August 2023, 09:01
![](/profiles/img/58356-672-s.jpg)
A very satisfactory result, it has some fault that must be corrected in the assembly, such as the union between the front part of the fuselage and the rest, sandpaper first, putty and more sandpaper. Most of the panels are embossed except for somewhere like the speedbrake area. The air intake of the motors has nothing inside, the fan should be visible and there is only a gap of +/-1cm. The nozzles also without anything inside, you should see the turbine, here I have solved it with 3D printed parts, the nozzle in the closed position has a total absence of details, solved with 3D. In the end you can get a good result. I want to make one for myself hahaha, but this will be a two-seater model B, the one I had with my name on the fuselage when I was assigned to the flight line.
2 August 2023, 21:06
Album info
This is a commission for a comrade who goes to the reserve after 40 years of service. Fictious numeral in nose and tail.