Duvar
Wall
August 26, 2024
CaptGPF
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
All comments (31) » 89 30 December 2023, 05:25
CaptGPF
LOL! I will have to redo that base as it isn't quite accurate compared to a real carrier deck. So many kits, so little time. 😀
LOL! I will have to redo that base as it isn't quite accurate compared to a real carrier deck. So many kits, so little time. 😀
26 August, 16:54
Nathan Dempsey
Always good to see this one in the feed. I'm going to peer into my unbuilt one's box now…
Always good to see this one in the feed. I'm going to peer into my unbuilt one's box now…
26 August, 17:35
August 25, 2024
CaptGPF
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
64 Görüntüler
To Russia, with Love - Hobby Boss 1/48 A-10A - Complete1:48
Slime lights turned out well, so I guess I’m good with calling this puppy done!
If you lasted this long - THANK YOU1
All comments (12) » 40 29 July, 17:30
CaptGPF
Alexander / Spanjaard / Ben / Robert / Mr James and Gorby - Thank you for the kind words. It means a lot coming from the guys who are always putting out great builds that inspire me!
Mr D - yes, I used a rechargeable 9V battery - amazon.com/gp/produc..le?ie=UTF8&psc=1
This has a micro-usb charging port at the other end so I attached a micro-usb extender cable and routed it to the bottom of the Warthog.
I used blinking 3mm and Micro-LEDs for the rest of the kit from Amazon. Some folks use Arduinos or electronic kits, but that's a bit out of my league at this point - so I'll stick with blinking LEDs instead. - Simpler, Easier, and less parts to break. 😀
Alexander / Spanjaard / Ben / Robert / Mr James and Gorby - Thank you for the kind words. It means a lot coming from the guys who are always putting out great builds that inspire me!
Mr D - yes, I used a rechargeable 9V battery - amazon.com/gp/produc..le?ie=UTF8&psc=1
This has a micro-usb charging port at the other end so I attached a micro-usb extender cable and routed it to the bottom of the Warthog.
I used blinking 3mm and Micro-LEDs for the rest of the kit from Amazon. Some folks use Arduinos or electronic kits, but that's a bit out of my league at this point - so I'll stick with blinking LEDs instead. - Simpler, Easier, and less parts to break. 😀
25 August, 01:18
August 24, 2024
CaptGPF
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
70 Görüntüler
Mandalorian Razor Crest - Revell - Complete - for now…1:72
I have some 1/72 scale aircrew from Hasegawa that I will add to the base diorama - but that is after I recover from the ...
Scratchbuilt
All comments (42) » 91 15 April, 15:52
August 21, 2024
CaptGPF
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
27 Görüntüler
Loaded for Bear - F-35B in Beast Mode1:72
This was a really enjoyable kit for the 1:72 scale. Availability of this kit in the US is a bit scarce, but definitely ...
All comments (16) » 58 3 June, 03:18
August 10, 2024
June 26, 2024
June 3, 2024
April 23, 2024
April 21, 2024
CaptGPF
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
All comments (25) » 83 12 April 2023, 21:46
Michael Kohl
I saw those figures in person yetsterday and they look very fine. The printing supports shouldn't be difficult to remove either.
I saw those figures in person yetsterday and they look very fine. The printing supports shouldn't be difficult to remove either.
21 April, 18:31
April 12, 2024
CaptGPF
Anyone know of a reputable 3rd party 3D printing service? I’d like to get a 3D file of this cgtrader.com/3d-prin..85-86e6-0794eff49f6e printed so I can try my hand at figures.
I’m still on the fence with 3D printing, as I certainly don’t have the volume to justify getting one.
Thanks in advance!
I’m still on the fence with 3D printing, as I certainly don’t have the volume to justify getting one.
Thanks in advance!
All comments (5) » 2 11 April, 16:46
gorby
Sorry the link I posted is just for the 3D file. There are plenty of other fully printed models available although as Michael says, check the delivery costs before you order anything.
Sorry the link I posted is just for the 3D file. There are plenty of other fully printed models available although as Michael says, check the delivery costs before you order anything.
12 April, 15:30
Michael Kohl
Michael - did you get a Resin or plastic extruded printer?
Neither - nor. I don't print (yet). The information from people who do discouraged me (so far). I will have to learn 3D design from scratch and printing itself requires quite a bit of experience and handon time. Much more than I am willing to invest right now.
Michael - did you get a Resin or plastic extruded printer?
Neither - nor. I don't print (yet). The information from people who do discouraged me (so far). I will have to learn 3D design from scratch and printing itself requires quite a bit of experience and handon time. Much more than I am willing to invest right now.
12 April, 16:04
April 10, 2024
March 14, 2024
March 12, 2024
CaptGPF
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
23 Görüntüler
SC-51γ1:72
Notice the Russian-style landing gears - heavily borrowed from the Sukhoi series.
proje: SV-51γ Nora Type
All comments (9) » 29 20 July 2023, 05:12
CaptGPF
Thank you Akaidada! Robin! This was a fun kit to build, and I'm glad you enjoyed the final result. 😀
Thank you Akaidada! Robin! This was a fun kit to build, and I'm glad you enjoyed the final result. 😀
12 March, 20:43
March 3, 2024
CaptGPF
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
20 Görüntüler
MPC 1:43 X-WingI added a few laser scorch marks, but kept the X-wing clean. My weathering skills were non-existent, so I kept it fairl...
14 19 December 2023, 06:02
CaptGPF
Thanks James! This was torturing me for a long time when I got back into the hobby - screaming to be redone properly. What was supposed to be a "quick" touch up and repaint ended up taking a lot longer than I anticipated. I've since purchased a second kit and plan to tart the up a lot more with LEDs.
So many kits, so few weekends….
Thanks James! This was torturing me for a long time when I got back into the hobby - screaming to be redone properly. What was supposed to be a "quick" touch up and repaint ended up taking a lot longer than I anticipated. I've since purchased a second kit and plan to tart the up a lot more with LEDs.
So many kits, so few weekends….
3 March, 21:11
Mr James
Ha, I know what you mean. The 'Kits to available days' ratio is heavily leaning towards the plastic stuff 🙂
Ha, I know what you mean. The 'Kits to available days' ratio is heavily leaning towards the plastic stuff 🙂
3 March, 21:58
CaptGPF
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
All comments (8) » 30 2 October 2023, 02:13
CaptGPF
Thank you James, Dash, Jörg! I should've lightened this a bit more - but the next one will be better - I hope. 😜
Thank you James, Dash, Jörg! I should've lightened this a bit more - but the next one will be better - I hope. 😜
3 March, 21:15
March 1, 2024
February 26, 2024
December 30, 2023
November 26, 2023
November 24, 2023
CaptGPF
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
All comments (10) » 30 12 April 2023, 21:38
CaptGPF
Thanks Neil! Didn't weather it much, but I hope to get to your level of weathering and chipping - eventually. 😀
Thanks Neil! Didn't weather it much, but I hope to get to your level of weathering and chipping - eventually. 😀
16 November 2023, 16:49
Neil
That is a very kind thing to say. I'm chuffed to bits. But my friend you're well in advance of me, your efforts showcase as much 👏👏👏👍
That is a very kind thing to say. I'm chuffed to bits. But my friend you're well in advance of me, your efforts showcase as much 👏👏👏👍
24 November 2023, 16:00
November 17, 2023
October 14, 2023
October 2, 2023
wnolder.php?lang=tr
2023-10-02 02:06:45
2022-12-10 07:07:57
121752
/ajax/wnolder.php?lang=tr&sd=2023-10-02 02:06:45&md=2022-12-10 07:07:57&filter=&w=121752
todo