Apollo 11
Yorumlar
6 January 2014, 01:51
![](/profiles/img/13701-543-s.jpg)
Thanks Fabian,right now I'm working on the base. It should be finished within 2 weeks 🙂
9 January 2014, 01:44
![](/profiles/img/11051-s.jpg)
Hi Brandon - very nice work - but it's a shame that nearly nobody thought about Michael Collins, , the third man on the mission...😉
9 January 2014, 20:51
![](/profiles/img/13701-543-s.jpg)
Thanks Mike! I completely agree,without Michael,how would Neil and Buzz get to the moon and back? Also Mike had one of the toughest jobs on the mission (besides Neil taking over the lander,that wasn't planned) he had to do all the course-corrections,and enter the moons orbit. He also piloted the command module on re-entry,and if he did that wrong they'd bounce off the atmosphere never to be seen again.
9 January 2014, 20:55
![](/profiles/img/13701-543-s.jpg)
Michael also had to dock the CSM and LM while they're in earth orbit,if he messed that up they couldn't go to the moon. He also had to dock the CSM to the ascent stage of the lander after they took off from the moon,if Mike messed that up and crashed. Neil and Buzz would of been killed,so during the whole mission,Neil and Buzz's life depended on Mike Collins
9 January 2014, 21:04
![](/profiles/img/11051-s.jpg)
...I remember😉 - I was fifteen years old when the mission to the moon started. It was really an adventure and I collected every news about the project I can get...
I'm still following your project here on SCM!
10 January 2014, 17:03
![](/profiles/img/13695-917-s.jpg)
I have a Nasa poster that is actually autographed by the crew of Apollo 11. It is a nice piece of history.
12 January 2014, 01:22
![](/profiles/img/13701-543-s.jpg)
It took a lot longer than it should of,but I'm very happy with the end result!
22 January 2014, 18:14
![](/profiles/img/13680-285-s.jpg)
The foil look nice as well. How the weather your way? Here in Pittsburgh at my house it's 10 degree with about 3 inches of snow and a wind chill of -13
22 January 2014, 18:41
![](/profiles/img/13701-543-s.jpg)
I live in Massachusetts,we have about 2.5ft of snow on the ground and it's about -10°F
22 January 2014, 18:51
![](/profiles/img/13701-543-s.jpg)
We have a snow blower....it's fun to use only when it's not in subzero temps. Lol. Even with a huge jacket on I can only stay out there for about 20 minutes!
22 January 2014, 19:01
![](/profiles/img/13680-285-s.jpg)
Good luck, I have only about 20 ft of walkway to the front door to shovel
22 January 2014, 19:04
![](/profiles/img/13701-543-s.jpg)
That's too not bad,but the wind chill is the worst. Try to be fast so you don't chap your whole face! Lol
22 January 2014, 19:07
![](/profiles/img/13680-285-s.jpg)
Now that is cold. Martin, how far north is Aros? is it above the Arctic Circle.
Norway rule in the winter games. I will be watching
22 January 2014, 19:16
![](/profiles/img/12360-198-s.jpg)
Not at home at the moment. In Tromso about 250km inside the arctic circle. Åros is well south but it was - 14c on Monday. As for the Winter Games ...... well I was born and raised
in England and have very little interest in winter sports .....:-P Oppps don`t tell the wife she is Norwegian and a total sports nut:-9
22 January 2014, 19:34
![](/profiles/img/12074-242-s.jpg)
Brandon, I have this kit and was thinking of filling in all the recessed "shadow" areas on the base and just painting it all "moon-dirt" color... Did you give that any thought? BTW, nice job! All that foiling looks hard!
22 January 2014, 19:37
![](/profiles/img/13701-543-s.jpg)
Thanks Greg!!
No not really,I painted the shadows because it looks more realistic. I used a lot of reference pics
22 January 2014, 19:57
![](/profiles/img/13457-212-s.jpg)
looking good, but the base seems a bit glossy (might just be your camera)
I´ve build a simmilar Revell Set, but in 1:96 (or so), and was glad that I could use my Airbrush to create a dusty/sandy look on the base, by spraying a quite "thick" mixture of stone gray. But I´ve got no idea how you could do that whithout an airbrush...
22 January 2014, 20:13
![](/profiles/img/12074-242-s.jpg)
Flat rattle-can paint would work... or, just hit it with a flat clear...
22 January 2014, 20:14
![](/profiles/img/13457-212-s.jpg)
ok, but what i meant was the look of dust, like little grains on the surface.😉
22 January 2014, 20:19
![](/profiles/img/14321-181-s.png)
This is exellent 😄😄😄😄 I want a space shuttle now lol
And im in the same situationcas john lol
22 January 2014, 21:41