ölçekli modelleme veritabanı | depo yöneticisi
iblanc
Roger Blanc (iblanc)
CH

Me262, JaboBait

Yorumlar

23 4 September 2014, 07:39
Roger Blanc
I already made one 🙂 there will be some more
4 September 2014, 08:27
Ulf Petersen
Looks amazing!👍 More pictures of the finished thing would be nice!
4 September 2014, 09:55
John Thomas
Very cool
4 September 2014, 12:11
Roger Blanc
I will post some pictures. the finished you see is an awesome one which inspired me. At the moment I'm on cockpit detailing.
5 September 2014, 05:39
Rob van Dodewaard
excellent
5 September 2014, 06:22
Bart Goesaert
very nice paintjob...
5 September 2014, 07:49
Jens
👍 👍 👍
5 September 2014, 12:31
Gary
The wireing of the wheel wells is impressive. Great job! Gary
5 September 2014, 12:56
Christian Ristits
Amazing work, excellent!
5 September 2014, 16:07
Choppa Nutta
Very cool indeed 🙂
5 September 2014, 16:13
Aghis Barberopoulos
The details look really good, and the paintjob and finish are very well done! One of the best Schwalbe in 1/48 that I have seen.
5 September 2014, 16:37
Christian Lehmann
I agree to Aghis. Well done replica of the original.
5 September 2014, 17:27
Jan Hazes
Nicely done 🙂
5 September 2014, 17:34
Michel Huijghe
👍
5 September 2014, 17:52
Philip De Keyser
Fantastic Job Roger 👍
7 September 2014, 10:47
Burkhard D
Great job, eh! 🙂
7 September 2014, 11:31
Albi Hitz
Yesss!! 👍 👍 👍
Top!
7 September 2014, 11:35
In the trenches
That is sweet, love the 'bolt' too
21 September 2014, 09:30
Hunter Cummins
I like how you chiped the decal! How did you do it?
21 September 2014, 12:43
Roger Blanc
To avoid missunderstandings, the finished model you see, is an awesome built model by Julien Hacoun ! It's my ideal what I want to build. The decals are, as you see in project inventory,from eagle strike, too little to late, are "pre chipped". I will try to make them as similar as possible like seen on the originalPicture.
21 September 2014, 13:05
Es-haq Khosravi
Great job!
29 September 2014, 10:39
Bart Goesaert
the preshading of the panellines, did you do them with a marker? Doesn't it give problems with bleeding through the paint after a while?
29 September 2014, 10:45
Wim van der Luijt
I'm following this one...(maybe edit the pics in the gallery so the descriptions show which ones are not your own work?)
29 September 2014, 10:47
Choppa Nutta
I've used marker pen on somethings, it does bleed a bit depending on the paint but once that coat has dried that tends to be the end of the bleeding, but the bleeding does help to soften the edges which is handy for preshading etc
Anyhow, coming along nicely, wheel wells look great 🙂
29 September 2014, 18:07
Roger Blanc
Hi all, Thanks to your feedback 🙂 The preshading with marker is indeed a test, a try "how will it look like ?" I read some experiences with that marker that tere will be no problems, means exactly with that type of Marker. @ Wim, you are right, I will reload them again, obviously marked, that they are made by Julien Hacoun. I also will try to make better Fotos. I'm a little bit disappointed about.
30 September 2014, 06:43
Roger Blanc
I have to break for 3-4 Month because I relocate to a new flat. :-/.. to be continued in February 2015
27 October 2014, 21:50
Bill Spargo
Awesome , so well done
28 October 2014, 02:42
Clifford Keesler
Very nice.
28 October 2014, 04:03
Ulf Petersen
Well done, Sir!
28 October 2014, 06:41
Rob van Dodewaard
Good luck with moving
28 October 2014, 08:20
Bart Goesaert
enjoy the new flat...
28 October 2014, 11:40
Roger Blanc
Thanks to you all 🙂
The last I did before I packed my tools, was a test with the Marker on my "test environment F14". marking pannellines -> glossy sealer -> whashing -> glossy sealer -> decals -> "not so glossy" sealer mixed with little trace elements of color. It doesn't look bad . I will try to make good photos to see the result.
30 October 2014, 05:43
Roger Blanc
On the test Modell now finished the Sandpaper work. Next step primer ( AK grey acrylics ). Then we will see how good the work was
25 November 2022, 10:43
Roger Blanc
As you can see on my last pictures ( 1.1.2023 ). The fit of the Key parts is really poor. I must also further use putty on my Jabo bait modell. The edge on left wing to fuselage is not good enough. The second ME 262 will be built better regarding this.
1 January 2023, 15:39
Alan G
Still looking good though Roger. It is an old kit though. I'm just building Revell's new 1:32 Me262.
1 January 2023, 15:45
Roger Blanc
That's great, Alan! I will build a 1/32 too in future!
On picture 25 and 26 the result of 4 evenings putty and sanding of the nose. Now painting the interior of the fuselage and mounting the wings. And maybe sanding the nose again. Something is not looking good enough, I'm shure I'll see it if it when I spray one, two levels RLM76.
9 January 2023, 22:08
Roger Blanc
The Sandpaper work needed much more time I presumed. There was also a massive use of putty. But now, it's OK on both machines. I will apply preshading on the Jabo Bait with airbrush too. I have no good feeling with the marker ones. I learnd much about sand paper work and putty. … too much…😃
2 February 2023, 08:48
Roger Blanc
Now the journey together is over. Means all work which must be done on both planes in the same way is done. One of them will be the Jabo bait, the other one my restored Me 262. 😀
5 February 2023, 19:22
Guy Rump
Looking good. 👍
5 February 2023, 22:39
AndreasK
Watching
13 February 2023, 21:33
Roger Blanc
Camouflage of the restored machine with my restored Airbrush applied. RLM82 with enamel and RLM83 with acrylic. Now to figure out how to brush the sprinkles on the side
16 February 2023, 03:53
Roger Blanc
After applying the camouflage with adding a glossy Level, started to apply the decals. But first a shock. Started with the black crosses, but the first 3 crashed! After a few minutes panic I remembered that to use hand warm water. And NOT let them in the water for being movable. After using Mr Mark setter and Mr. Mark softer they are fitting well.
19 February 2023, 17:52
Alan G
Looking great Roger
28 February 2023, 20:17
Roger Blanc
The restored Machine is finished now. There are a lot of lessons learned, until to the last doings.
- Don't use the decals out of the box. Even with massive Mr Mark setter and softer, they silver extremely, marked with yellow arrows on the Photo. The decals of eagle strike are great. You see the difference immediately. Jabo bait will be only made with the eagle strike decals.
- apply Klear, if you have to the Canopy. The effect is awesome. But I cannot recommend it for a glossy layer on the whole plane. Take a real good clear glossy coat for this.
The canopy is crooked and skewed mounted because also it is not fitting at all. They thaught, it can be mounted open, and then it doesn't matter whether it's not fitting. If I find a canopy which is closed and only one part, I will replace it.
Now ongoing with the Jabo bait!
28 February 2023, 20:39
Alan G
I use Klear as my gloss coat for decals. Never had a problem with it. As you say though. It's also great for canopies
28 February 2023, 20:53
Thomas Bischoff
Looks like a long term project - would love some more pictures of the finished Jet
28 February 2023, 21:02
Roger Blanc
Finished! A lot of experience made, a lot of lessons learned. Most positive was the thing with „Klear" for the canopy. There is also the most negative, the canopy itself. If you make this model, you MUST this build with open canopy. Else it looks crappy like mine. My opinion is, a Me 262 must be build with closed canopy, so you can see the beauty of this plane at it's best. Also awesome is the chipping fluid. It looks more realistic than painted. Also positive is my new AirViper Airbrush. The handling is perfect, really made for scale modeling. But strongly recommended: If you unbox it, also dismount it completely and mount it new. I thought it was DOA when used it first time. Color came out on every trigger position, spraying ugly dots, etc, all OK after dismount and remount.
Maybe I will build a 262 again, a newer kit.
8 April 2023, 12:55

Album info

Fotos des Projektes

37 Görüntüler
1:48
Tamamlanan
1:48 Messerschmitt Me 262 A-1a / Nightfighter (Revell 04509)1:48 Too Little, Too Late... Me 262's Pt. III (Eagle Strike Productions 48064)
Messerschmitt Me 262 A-1a
US US Army Air Forces (1941-1947)
FE-110
1945 Captured by US Troops - Lechfeld 3R
 

Tüm albümler

Tüm albümleri görüntüle »