Brewster 339E Buffalo Mk. I (Special Hobby)
![Album image #1 Album image #1](/albums/img/9/5/4/163954-10105-17-720.jpg)
The plastic stuff...and the stickers.
![Album image #2 Album image #2](/albums/img/9/5/5/163955-10105-10-720.jpg)
Great resin! Engine, instrument panel, tyres, seat.
![Album image #3 Album image #3](/albums/img/9/5/6/163956-10105-53-720.jpg)
Cockpit sidewalls, rudder pedals, fuel tank.
![Album image #4 Album image #4](/albums/img/9/5/7/163957-10105-37-720.jpg)
Prop hub, closer views of the rudder pedals and fuel tank.
![Album image #5 Album image #5](/albums/img/9/5/8/163958-10105-89-720.jpg)
Seat and seat support.
![Album image #6 Album image #6](/albums/img/9/5/9/163959-10105-22-720.jpg)
Some nasty injection towers - and in a really bad place. Got to come off.
![Album image #7 Album image #7](/albums/img/9/6/0/163960-10105-81-720.jpg)
Mold damage! There should be two concave areas. Out with the Dremel tool!
![Album image #8 Album image #8](/albums/img/9/6/1/163961-10105-13-720.jpg)
British Buaffloes had a longer tail, so we have to cut off the USN version.
![Album image #9 Album image #9](/albums/img/9/6/2/163962-10105-22-720.jpg)
Wifey always cleans up my workbench at the start of a project. I almost don't want to get it dirty!
![Album image #10 Album image #10](/albums/img/9/6/3/163963-10105-87-720.jpg)
Firewall placement. Notice that I fixed the concave area that had the mold damage.
![Album image #11 Album image #11](/albums/img/9/6/4/163964-10105-27-720.jpg)
Rudder pedals glued to the bottom of the instrument panel.
![Album image #12 Album image #12](/albums/img/9/6/5/163965-10105-42-720.jpg)
I broke the coaming, but a little superglue and some putty fixes it right up.
![Album image #13 Album image #13](/albums/img/9/6/6/163966-10105-48-720.jpg)
It wasn't easy figuring out where the engine supports were supposed to go!
![Album image #14 Album image #14](/albums/img/9/6/7/163967-10105-24-720.jpg)
This represents the engine mount, oil cooler, and the exhaust ring.
![Album image #15 Album image #15](/albums/img/9/6/8/163968-10105-16-720.jpg)
Cockpit sidewalls in place.
![Album image #16 Album image #16](/albums/img/9/6/9/163969-10105-64-720.jpg)
Oops, a little gap. But everything else lines up!
![Album image #17 Album image #17](/albums/img/9/7/0/163970-10105-47-720.jpg)
Some paint work in the driver's compartment.
![Album image #18 Album image #18](/albums/img/9/7/1/163971-10105-82-720.jpg)
Fixing the little gap.
![Album image #19 Album image #19](/albums/img/9/7/2/163972-10105-79-720.jpg)
Engine and supercharger housing painted with Alclad and a black wash.
![Album image #20 Album image #20](/albums/img/9/7/3/163973-10105-12-720.jpg)
Cockpit components in place.
![Album image #21 Album image #21](/albums/img/9/7/4/163974-10105-15-720.jpg)
More details.
![Album image #22 Album image #22](/albums/img/9/7/5/163975-10105-66-720.jpg)
British Buffaloes had two landing lights on the bottom of the wings. Out comes the drill!
![Album image #23 Album image #23](/albums/img/9/7/6/163976-10105-51-720.jpg)
Engine mounts and landing gear support painted with Alclad and a black wash.
![Album image #24 Album image #24](/albums/img/9/7/7/163977-10105-92-720.jpg)
Exhaust collector and engine mount ready to be attached.
![Album image #25 Album image #25](/albums/img/9/7/8/163978-10105-18-720.jpg)
Engine mount in place.
![Album image #26 Album image #26](/albums/img/9/7/9/163979-10105-66-720.jpg)
And the engine takes its place up front.
![Album image #27 Album image #27](/albums/img/9/8/0/163980-10105-46-720.jpg)
The opening for the lower window was too small - top half shows the alteration required.
![Album image #28 Album image #28](/albums/img/9/8/1/163981-10105-59-720.jpg)
The window masked and ready to be added to the lower fuselage.
![Album image #29 Album image #29](/albums/img/9/8/2/163982-10105-64-720.jpg)
Standard seat (top) modified into a British seat with square top (below).
![Album image #30 Album image #30](/albums/img/9/8/3/163983-10105-91-720.jpg)
Rear deck and roll-over pylon.
![Album image #31 Album image #31](/albums/img/9/8/4/163984-10105-51-720.jpg)
Window in place - I added some safety strips to prevent it from being pushed into the fuselage.
![Album image #32 Album image #32](/albums/img/9/8/5/163985-10105-18-720.jpg)
Three propeller blades glued to the resin hub.
![Album image #33 Album image #33](/albums/img/9/8/6/163986-10105-94-720.jpg)
Assembled! Sheet styrene used for seat and head armour plates.
![Album image #34 Album image #34](/albums/img/9/8/7/163987-10105-32-720.jpg)
Filling the gap made the fuselage exactly the same width as the canopy parts.
![Album image #35 Album image #35](/albums/img/9/8/8/163988-10105-55-720.jpg)
Dark Green goes on first. Order of painting was determined by ease of masking.
![Album image #36 Album image #36](/albums/img/9/8/9/163989-10105-40-720.jpg)
Masking for the camouflage pattern in place.
![Album image #37 Album image #37](/albums/img/9/9/0/163990-10105-55-720.jpg)
Dark earth added and the masking removed.
![Album image #38 Album image #38](/albums/img/9/9/1/163991-10105-10-720.jpg)
The landing gear legs are on and painted Dark Green.
![Album image #39 Album image #39](/albums/img/9/9/2/163992-10105-90-720.jpg)
Sky Blue fuselage band.
![Album image #40 Album image #40](/albums/img/9/9/3/163993-10105-18-720.jpg)
Coming at you!
![Album image #41 Album image #41](/albums/img/9/9/4/163994-10105-59-720.jpg)
Bottom is painted Sky and Night using Tamiya Sky and NATO Black.
![Album image #42 Album image #42](/albums/img/9/9/5/163995-10105-32-720.jpg)
Underside of cowling ring is all Sky according to photos of the plane I'm building.
![Album image #43 Album image #43](/albums/img/9/9/6/163996-10105-60-720.jpg)
Decals on for W.8209, TD-E. It's the return of Snifter the Dog!
![Album image #44 Album image #44](/albums/img/9/9/7/163997-10105-25-720.jpg)
I like it so far.
![Album image #45 Album image #45](/albums/img/9/9/8/163998-10105-55-720.jpg)
I hope I don't have to do another one of those windows anytime soon...
![Album image #46 Album image #46](/albums/img/9/9/9/163999-10105-40-720.jpg)
The British Buffaloes had the wing roundels "way out" towards the end of the wing. Odd placement.
![Album image #47 Album image #47](/albums/img/4/5/8/165458-10105-89-720.jpg)
New gear doors from styrene card.
![Album image #48 Album image #48](/albums/img/4/5/9/165459-10105-53-720.jpg)
British reflector gunsight - not so big in 1:72 scale!
![Album image #49 Album image #49](/albums/img/4/6/0/165460-10105-50-720.jpg)
Vacuform sliding portion of the canopy.
![Album image #50 Album image #50](/albums/img/4/6/1/165461-10105-78-720.jpg)
Vacuform designed for Airfix/Matchbox kit, with masks for S-H kit. And everything fits!
![Album image #51 Album image #51](/albums/img/4/6/2/165462-10105-68-720.jpg)
Generic seat harness masquerading as a Sutton harness.
![Album image #52 Album image #52](/albums/img/4/6/3/165463-10105-89-720.jpg)
Prop and spinner. Spinner will get a rubber tip (courtesy of a decal).
![Album image #53 Album image #53](/albums/img/4/6/4/165464-10105-83-720.jpg)
Some light pastel work.
![Album image #54 Album image #54](/albums/img/4/6/5/165465-10105-69-720.jpg)
Canopy painted. Side panel is a decal from an F-105 decal sheet.
![Album image #55 Album image #55](/albums/img/4/6/6/165466-10105-83-720.jpg)
Seat and aerial mast installed.
![Album image #56 Album image #56](/albums/img/4/6/7/165467-10105-41-720.jpg)
Getting real close now! Need to add navigation lights and landing lights.
![Album image #57 Album image #57](/albums/img/4/6/8/165468-10105-41-720.jpg)
Also need to add the aerial wire and lead-in.
![Album image #58 Album image #58](/albums/img/4/6/9/165469-10105-41-720.jpg)
Added aerial post on top of tail, the sliding canopy, and the starboard wing probe.
![Album image #59 Album image #59](/albums/img/1/8/4/166184-10105-21-720.jpg)
Landing light photoetch sealed with Future (Kleer).
![Album image #60 Album image #60](/albums/img/1/8/5/166185-10105-94-720.jpg)
Finished!
![Album image #61 Album image #61](/albums/img/1/8/6/166186-10105-12-720.jpg)
![Album image #62 Album image #62](/albums/img/1/8/7/166187-10105-42-720.jpg)
![Album image #63 Album image #63](/albums/img/1/8/8/166188-10105-80-720.jpg)
![Album image #64 Album image #64](/albums/img/1/8/9/166189-10105-21-720.jpg)
![Album image #65 Album image #65](/albums/img/1/9/0/166190-10105-83-720.jpg)
![Album image #66 Album image #66](/albums/img/1/9/1/166191-10105-16-720.jpg)
![Album image #67 Album image #67](/albums/img/1/9/2/166192-10105-83-720.jpg)
![Album image #68 Album image #68](/albums/img/1/9/3/166193-10105-76-720.jpg)
![Album image #69 Album image #69](/albums/img/1/9/4/166194-10105-57-720.jpg)
![Album image #70 Album image #70](/albums/img/1/9/5/166195-10105-22-720.jpg)
![Album image #71 Album image #71](/albums/img/1/9/6/166196-10105-84-720.jpg)
![Album image #72 Album image #72](/albums/img/1/9/7/166197-10105-11-720.jpg)
![Album image #73 Album image #73](/albums/img/1/9/8/166198-10105-48-720.jpg)
![Album image #74 Album image #74](/albums/img/1/9/9/166199-10105-68-720.jpg)
![Album image #75 Album image #75](/albums/img/2/0/0/166200-10105-74-720.jpg)
Snifter family reunion.
Yorumlar
1 18 February 2015, 02:28
![](/profiles/img/10105-s.jpg)
Hi mates, I've started a photo album for my latest project (which is almost finished). I've been working on it for a month. It's the oh-so-cute tubby little Brewster Buffalo in RAF/RAAF markings. I chose the Special Hobby kit because of the great resin detail parts. Have look and enjoy! Cheers, Bill
18 February 2015, 03:03
![](/profiles/img/11956-755-s.jpg)
That's a lovely little bugger... I like the buffalo!
Well done, sir,
18 February 2015, 03:21
![](/profiles/img/16661-726-s.jpg)
Excellen t work as usual, Bill ! How do you achieve this tremendous depth in detail with the instruments in the panel, are they decals or do you paint them freehand ? I`m a bit envyous......😢
18 February 2015, 10:04
![](/profiles/img/10105-s.jpg)
Thanks, mates! 🙂
Guido - no tape residue. I used the Tamiya tape.
Hanno - the instrument panel is a combination of decals and freehand painting. The instrument faces and dials are decals that I applied individually to match the detail in the resin.
18 February 2015, 17:26
![](/profiles/img/10638-s.jpg)
Nice and clean built, like always, Bill!! 🙂
The fat barrel is on my to do list too!
It is always a pleasure to watch your builts!
I have both volumes of "Bloody Shambles" from Christopher Shores, Brian Cull and Yasuho Izawa in my stash. Just incredible what these RAAF/RAF/RNZAF and Dutch Pilots have undergone to fight against an overwhelming opponent and modern fighters like the Zero and Hayabusa.
Your model represents W8209/F, Squadron No.453 / Kuala Lumbur of Sgt. Mac Read, KIA, ......"last seen apparently ramming or crashing into an opponent as he went down......." This happened on Monday, 22. December, one of the big air battles over Malaya. Btw, the opponent that day was the 64.Sentai with Ki-34 Hayabusa fighters led by Major Tadeo Kato. The battle lasted for over 30 minutes and 15 Buffalos fought against 18 Hayabusas with heavy losses for Squadron No.453.
Cheers Dirk
18 February 2015, 19:53
![](/profiles/img/10105-s.jpg)
Hi Dirk, thanks for the nice comments. Sgt. Read flew the plane I'm modelling, but he died in a different aircraft. When I get home I can post the serial number.
W.8209 (there is a decimal point between the W and the😎 was coded TD-E. The kit decals were TD-F, and I had to modify them. Surviving logbooks from 453 Squadron show that TD-F was a different aircraft. There is a movie at the IWM that shows my plane during an inspection, and it's TD-E.
I have to read Bloody Shambles, I've heard from several people that it is really good. I'm currently reading Buffaloes Over Singapore, which is also by Brian Cull. You are right, it is incredible what these guys did.
The research part is almost as fun as building the model! I have the Dutch Buffalo to build along with the US Marines (Midway), the Finnish model 239, and US Navy (Yellow Wings). That will make a nice little collection! Cheers, Bill
18 February 2015, 22:43
![](/profiles/img/10105-s.jpg)
Latest pictures are posted. I keep finding some other little fiddly thing that needs to be done, but it is very close to being finished! 🙂
26 February 2015, 01:54
![](/profiles/img/10105-s.jpg)
Hi Holger - you are right, it has been quick. But it's a small model, not many parts! 🙂
27 February 2015, 01:13
![](/profiles/img/10105-s.jpg)
Thanks, mates! There are still a few things to finish. Last night I did the landing lights on the underside of the wings. I put some photoetched landing lights into the holes in the wings, and then sealed them in with Future (Kleer) to represent the lens. I think it looks pretty good. I'll get a picture soon.
27 February 2015, 17:26
![](/profiles/img/10105-s.jpg)
The Buffalo is finished! I added the landing lights, the aerial wire and lead-in, plus I added a decal for the gas patch as well as the sealing over the gun camera port. Not my best work, but I will remember it as my chemo-bird, built while I was having my cancer treatments. I've added several more photos to show the final work. The very last photo shows the Buffalo and my recent Beaufort, both with Snifter nose art. 🙂
1 March 2015, 21:35
![](/profiles/img/13796-867-s.jpg)
That looks like a beautiful kit and you have done marvelous work with it. The scheme is great. We should all remember those brave men.
2 March 2015, 00:22
![](/profiles/img/11586-s.jpg)
wow, Bill I have the matchbox and airfix buffaloes. I have built them years ago. yours is a great build wow
2 March 2015, 04:17
![](/profiles/img/16303-647-s.jpg)
The Buffalo is really a great nice plane! I ve two Hasegawa combos in my stash and I think I will build one Finland version soon 🙂
2 March 2015, 06:24
![](/profiles/img/16140-555-s.jpg)
Phantastic art, Bill!👍 I am glad to see your output increase. Keep on!
2 March 2015, 06:59
![](/profiles/img/11224-741-s.jpg)
which is made class without telling the scale, I would have thought it a '48 model 👍 👍 👍
17 February 2018, 18:12
![](/profiles/img/27826-126-s.jpg)
Very nice "Buffie" and Albemarle looks very good. Does the Buffalo's assembly have any difficulty?
17 February 2018, 19:46
![](/profiles/img/10105-s.jpg)
Thanks mates. It's always fun to have an old thread revived. I was just dusting this model the other day! 🙂
@Cuajete, for a more detailed look at the building of this Buffalo, see my WIP thread here:
britmodeller.com/for..rewster-buffalo-mki/
This reminds me, I still have more of these to build - USN F2A-1 (yellow wings), USMC F2A-3 (Midway), Finland B-239, and Netherlands B-339. Cheers, Bill
18 February 2018, 18:52
![](/profiles/img/27826-126-s.jpg)
Many thanks, Bill. Checked. When I said Albemarle, I meant to say Beaufort. Sorry.
18 February 2018, 20:04
Album info
This kit represents a Buffalo Mk. I from 453 Squadron, flown by very brave RAAF pilots in the defence of Singapore. The build will be pretty much out-of-the-box, since the kit comes with some highly detailed resin components.