Viper progress
![Album image #1 Album image #1](/albums/img/3/3/2/408332-28369-47-720.jpg)
Just test fit of remaining parts (upper and rear engine parts)
![Album image #2 Album image #2](/albums/img/3/3/5/408335-28369-77-720.jpg)
Biggest gap which will need to be filled. The rest of the parts should be ok.
![Album image #3 Album image #3](/albums/img/3/3/4/408334-28369-79-720.jpg)
guns cleaned and holes drilled
![Album image #4 Album image #4](/albums/img/8/4/7/407847-28369-55-720.jpg)
main body closed and I'm adding more parts one by one
![Album image #5 Album image #5](/albums/img/7/5/6/407756-28369-18-720.jpg)
The color of the cockpit is wrong (should be darker grey) but I will not change it now
![Album image #6 Album image #6](/albums/img/7/5/7/407757-28369-37-720.jpg)
finished cockpit
![Album image #7 Album image #7](/albums/img/3/0/5/463305-28369-97-720.jpg)
preparing for base coat
![Album image #8 Album image #8](/albums/img/3/0/6/463306-28369-25-720.jpg)
probably will need to sand the joint wing - fuselage
![Album image #9 Album image #9](/albums/img/3/0/7/463307-28369-12-720.jpg)
coming along very nicely
![Album image #10 Album image #10](/albums/img/4/6/7/465467-28369-61-720.jpg)
PE piping replaced with lead wire
![Album image #11 Album image #11](/albums/img/4/6/8/465468-28369-92-720.jpg)
same for the other side
![Album image #12 Album image #12](/albums/img/4/6/9/465469-28369-54-720.jpg)
canopy in place, seams looking good so far. Ready for a coat of primer 🙂
![Album image #13 Album image #13](/albums/img/5/4/9/465549-28369-67-720.jpg)
found two older picture of the finished cockpit ready to be glued to the fuselage
![Album image #14 Album image #14](/albums/img/5/5/0/465550-28369-95-720.jpg)
and the other side of the cockpit
![Album image #15 Album image #15](/albums/img/9/2/6/465926-28369-32-720.jpg)
Mr. Surfacer 1000 testing. I think that it went well
![Album image #16 Album image #16](/albums/img/9/2/5/465925-28369-26-720.jpg)
seam checking - all the filing and sanding was worth it
![Album image #17 Album image #17](/albums/img/9/2/7/465927-28369-49-720.jpg)
even the worst transition is quite nice in the end
![Album image #18 Album image #18](/albums/img/9/2/8/465928-28369-67-720.jpg)
similar to the other side.
![Album image #19 Album image #19](/albums/img/3/3/0/471330-28369-51-720.jpg)
white base and masked for the engine bits
![Album image #20 Album image #20](/albums/img/3/3/1/471331-28369-89-720.jpg)
![Album image #21 Album image #21](/albums/img/3/3/2/471332-28369-16-720.jpg)
Yes I know. The engine bits should be more like iron color but I like it so far.
![Album image #22 Album image #22](/albums/img/3/3/3/471333-28369-22-720.jpg)
engine with several different colors of MR Paint metallic colors
![Album image #23 Album image #23](/albums/img/3/3/4/471334-28369-87-720.jpg)
engine bits enhanced with Mr Color buffable Dark Iron
![Album image #24 Album image #24](/albums/img/3/3/5/471335-28369-11-720.jpg)
![Album image #25 Album image #25](/albums/img/3/3/6/471336-28369-95-720.jpg)
![Album image #26 Album image #26](/albums/img/3/3/7/471337-28369-84-720.jpg)
everything glued together and ready for decals
![Album image #27 Album image #27](/albums/img/3/3/8/471338-28369-49-720.jpg)
front decals were the worst the side are without any problems
![Album image #28 Album image #28](/albums/img/3/3/9/471339-28369-67-720.jpg)
![Album image #29 Album image #29](/albums/img/5/1/4/472514-28369-61-720.jpg)
all decals on place. ready for clear cote and wash
![Album image #30 Album image #30](/albums/img/5/1/5/472515-28369-81-720.jpg)
If I should do this kit again in the future - red stripes will be airbrushed instead of using decals. it was nightmare to work with the decals in some places.
![Album image #31 Album image #31](/albums/img/5/1/6/472516-28369-31-720.jpg)
but it looks nice in the end 🙂 I'm happy with the result
![Album image #32 Album image #32](/albums/img/5/1/7/472517-28369-42-720.jpg)
![Album image #33 Album image #33](/albums/img/8/7/6/472876-28369-46-720.jpg)
matt varnish sealed everything. spacecraft is officialy finished! 🙂
![Album image #34 Album image #34](/albums/img/8/7/2/472872-28369-24-720.jpg)
since this is my (counting in my mind...) third proper plastic model, I'm quite happy how it turned out. (yes there are mistakes I know but I do not care at this point. 🙂 )
![Album image #35 Album image #35](/albums/img/8/7/4/472874-28369-66-720.jpg)
now let's get the stand painted. Nice details on the front surface...
![Album image #36 Album image #36](/albums/img/8/7/3/472873-28369-70-720.jpg)
... from the inside??? ehm... what? anybody any ideas?
![Album image #37 Album image #37](/albums/img/5/8/2/474582-28369-46-720.jpg)
decals are in place. lower portion was painted MRP-153 Gold.
![Album image #38 Album image #38](/albums/img/5/8/3/474583-28369-49-720.jpg)
not perfect (some cleaning of the gold paint of the "Map" could be better...
![Album image #39 Album image #39](/albums/img/5/8/4/474584-28369-84-720.jpg)
only final coat of gloss and we are done 🙂
![Album image #40 Album image #40](/albums/img/8/0/1/474801-28369-19-720.jpg)
final gloss coat in place (Pledge Floor care)
![Album image #41 Album image #41](/albums/img/8/0/2/474802-28369-44-720.jpg)
I'm quite pleased with the result. This is my first real attempt for the gloss finish. Final photos coming soon.
![Album image #42 Album image #42](/albums/img/5/7/0/475570-28369-67-720.jpg)
final result (more pictures in the DONE gallery)
Yorumlar
5 December 2017, 14:01
![](/profiles/img/21096-573-s.jpg)
maybe it should be darker (no idea), but it certainly looks really good 🙂. what is your opinion about the kit so far?
5 December 2017, 22:29
![](/profiles/img/28369-638-s.jpg)
Thank you very much. Regarding the kit itself, it will be challenge to put it together. some parts have loose fit but overall, I think that it is quite good. I had to fill and sand the gap between the two halves in the front section but other than that (so far) it is very pleasant build. The PE set from Green Strawberries is in my opinion must have.
6 December 2017, 08:20
![](/profiles/img/33306-993-s.png)
Nice! Looks good so far.
I'll take a seat. Have the moebius Mk II in my stash. Does the strawberry PE add this much?
17 April 2018, 11:17
![](/profiles/img/28369-638-s.jpg)
It is worth it. I did not used half lot of parts (side engine pipelines; undercarriage parts) but the cockpit really shine with the upgraded panels.
17 April 2018, 11:55
![](/profiles/img/33306-993-s.png)
On my wishlist🙂 was originally going for Paragrafix along with their USS Voyager PE set... But can't find it here.
And the greenstrawberry stuff looks good!
17 April 2018, 16:29
![](/profiles/img/21096-573-s.jpg)
i doubted betwen paragrafix and Greenstraberry too... Paragrafix can be ordered from US which can increase the price considerably when going through customs.... so i avoided problems and got Greenstrawberry. set is pretty good
17 April 2018, 16:33
![](/profiles/img/34174-191-s.jpg)
Nice progress! 👍 I have the Moebius kit so I'm curious to see how it goes 🙂.
17 April 2018, 17:09
![](/profiles/img/33306-993-s.png)
Very tidy paintjob👍
Did you have trouble joining the fuselage together?
4 May 2018, 15:41
![](/profiles/img/28369-638-s.jpg)
Thank you Rene. Fuselage went together quite easy and nice - no major problems there.
7 May 2018, 21:32
![](/profiles/img/33306-993-s.png)
Nice👍
For the stand... Maybe brushpaint the raised parts and airbrush it over with whatever color you plan for the recessed areas 🙂
12 May 2018, 00:56
![](/profiles/img/21096-573-s.jpg)
if the detail is inside, do a short of very heavy panel line wash with some dark color, clean everything out out of the recessed lines, and then paint the rest in light color.
unless the detail is raised instead of recessed. in that case, you can try to paint in black, carefully remove the pain with a cotton bud in the details, and then paint in white.
12 May 2018, 10:00
![](/profiles/img/28369-638-s.jpg)
Thank you all. I'm really please with the result. The build was quite fun. Final photos coming soon.
15 May 2018, 20:12
![](/profiles/img/12192-s.jpg)
How did ye do the base? Painted the old first and then sprayed over with black?
16 May 2018, 11:28
![](/profiles/img/28369-638-s.jpg)
Yes. The gold "map" was painted firts by hand, cleaned the edges as much as I could, masked the front side (so you can see the map) and several thinner coats of black everywhere. After that masked everything and bottom part get gold coat. After applying decals final clear gloss coat.
My hands were shaking while I was painting the gold map, and that's why it's not as clean as I would like.
16 May 2018, 12:13
![](/profiles/img/12192-s.jpg)
I would have chosen to paint it from the bottom as there the black parts are the recessed parts and thus you could have filled the lower parts with the gold.. just mho, but still you're way also resulted in a top piece
17 May 2018, 06:53
![](/profiles/img/34174-191-s.jpg)
Final result is excellent! 👍
I'm going to look at this when I build mine.😉
19 May 2018, 11:06
![](/profiles/img/33306-993-s.png)
Great work mate! I like how the base turned out along with the cleanish finish. Ready to roll the hard 6 🙂
Same as Björn, your build is a source of inspiration for my build 🙂 when I will start... Someday... One clean bird and one as they were at the end of the series.
20 May 2018, 12:21