10,000th Hellcat "Hirohito Special"
![Album image #1 Album image #1](/albums/img/6/0/6/426606-17864-74-720.jpg)
Master brass gun barrels mounted in the wing inserts. Fit was perfect.
![Album image #2 Album image #2](/albums/img/6/0/7/426607-17864-73-720.jpg)
PE ignition harness from the kit.
![Album image #3 Album image #3](/albums/img/6/0/9/426609-17864-73-720.jpg)
Completed engine, came out looking very nice, I must say!
![Album image #4 Album image #4](/albums/img/5/8/3/426583-17864-59-720.jpg)
Right fuselage sidewall.
![Album image #5 Album image #5](/albums/img/5/8/4/426584-17864-58-720.jpg)
Left fuselage sidewall, dressed up with a placard decal from Mike Grant.
![Album image #6 Album image #6](/albums/img/5/8/5/426585-17864-58-720.jpg)
Left cockpit console, detail is a combination of kit PE and decals.
![Album image #7 Album image #7](/albums/img/5/8/6/426586-17864-31-720.jpg)
![Album image #8 Album image #8](/albums/img/5/8/7/426587-17864-20-720.jpg)
Instrument panel, built up using kit PE. I filed down the plastic lump of the gunsight; will replace later with clear acetate film.
![Album image #9 Album image #9](/albums/img/6/0/8/426608-17864-44-720.jpg)
Instrument panel again, showing 3D PE detail, such as gun charging handles.
![Album image #10 Album image #10](/albums/img/5/8/8/426588-17864-81-720.jpg)
Cockpit. Went for hight contrast, Spanish style. Eduard fabric belts were badly printed, but easy to shape.
![Album image #11 Album image #11](/albums/img/5/8/9/426589-17864-65-720.jpg)
Test fitting cockpit.
![Album image #12 Album image #12](/albums/img/5/9/0/426590-17864-53-720.jpg)
![Album image #13 Album image #13](/albums/img/5/9/1/426591-17864-33-pristine.jpg)
![Album image #14 Album image #14](/albums/img/5/9/2/426592-17864-70-pristine.jpg)
![Album image #15 Album image #15](/albums/img/5/9/3/426593-17864-99-720.jpg)
Tail control surfaces were separated with a JLC razor saw.
![Album image #16 Album image #16](/albums/img/5/9/4/426594-17864-57-720.jpg)
Replacement control surfaces from Quickboost, which were installed with approx. 10 degree offset.
![Album image #17 Album image #17](/albums/img/5/9/5/426595-17864-93-720.jpg)
Another view of Quickboost tail feathers.
![Album image #18 Album image #18](/albums/img/5/9/6/426596-17864-39-pristine.jpg)
The Eduard kit is covered with gorgeous detail, but they completely omitted the formation lights on the belly. I scribed the locations, lights will be added later.
![Album image #19 Album image #19](/albums/img/5/9/7/426597-17864-30-720.jpg)
Acetate gunsight glass.
![Album image #20 Album image #20](/albums/img/5/9/8/426598-17864-69-720.jpg)
Another view of scratchmade gunsight.
![Album image #21 Album image #21](/albums/img/5/9/9/426599-17864-51-pristine.jpg)
Eduard molded the wingtip lights solid, but they should be clear. Removed kit lights with a razor saw. Drilled into squared off sections of clear sprue and filled with Tamiya clear Red/Green paint. CA glued to wing and sanded to shape.
![Album image #22 Album image #22](/albums/img/6/0/0/426600-17864-83-pristine.jpg)
After rough sanding new wingtip lights to shape.
![Album image #23 Album image #23](/albums/img/6/0/1/426601-17864-19-pristine.jpg)
Head-on view of wingtip lights. I also added the landing light in the leading edge of the left wing, but forgot to take pictures.
![Album image #24 Album image #24](/albums/img/6/0/2/426602-17864-58-720.jpg)
Ready to start painting - my favorite part!
![Album image #25 Album image #25](/albums/img/6/0/3/426603-17864-92-720.jpg)
Primed with Mr. Surfacer 1500 Black from a rattle can, then preshaded with Tamiya XF-66 and XF-9
![Album image #26 Album image #26](/albums/img/6/0/4/426604-17864-95-720.jpg)
Preshading on underside.
![Album image #27 Album image #27](/albums/img/6/0/5/426605-17864-10-720.jpg)
Basic Gloss Sea Blue in place. Used a mix of Tamiya X-8 and XF-17.
![Album image #28 Album image #28](/albums/img/9/7/7/461977-17864-74-720.jpg)
The shiny exposed oleo strut was "painted" with a Molotow marker, then masked and the strut sprayed GSB. Brake lines added from copper wire.
![Album image #29 Album image #29](/albums/img/9/7/8/461978-17864-13-720.jpg)
Decal madness beginning!
![Album image #30 Album image #30](/albums/img/9/7/9/461979-17864-19-720.jpg)
I used a sheet from Iliad Decals called Milestone Aircraft. It includes the 5000th P-38, 1000th B-17, etc.
![Album image #31 Album image #31](/albums/img/9/8/0/461980-17864-69-720.jpg)
Decals sealed with Tamiya clear, weathering started with Mig Ammo Medium gray panel line wash.
![Album image #32 Album image #32](/albums/img/9/8/1/461981-17864-45-pristine.jpg)
Going for minimal weathering, trying to depict the aircraft as it was delivered VBF-87. The medium gray came out nice, quite subtle.
![Album image #33 Album image #33](/albums/img/3/4/7/469347-17864-70-720.jpg)
I wanted to try emulating this photo, where oil and grease have leaked back into the exhaust stream.
![Album image #34 Album image #34](/albums/img/3/4/8/469348-17864-72-720.jpg)
Tamiya black and buff provided the starting point for the exhaust stains. You can also see that I tried airbrushing on some cordite streaks aft of the guns, but I didn't like how they turned out, so I went back and overpainted them with the base color.
![Album image #35 Album image #35](/albums/img/3/5/0/469350-17864-84-720.jpg)
A few of the bottom exhaust stains in progress.
![Album image #36 Album image #36](/albums/img/3/4/6/469346-17864-37-pristine.jpg)
Next, I used an Ammo of Mig black Oilbrusher and a Tamiya fine brush to paint in the oil patterns around the exhausts.
![Album image #37 Album image #37](/albums/img/3/4/9/469349-17864-73-720.jpg)
After letting the oil paint dry for a few hours, I blended them with a soft brush and a tiny bit of thinner. It didn't come out exactly how I wanted, but I am still fairly happy with the effect, for a first-time effort.
![Album image #38 Album image #38](/albums/img/2/0/5/472205-17864-64-pristine.jpg)
![Album image #39 Album image #39](/albums/img/2/0/6/472206-17864-95-720.jpg)
![Album image #40 Album image #40](/albums/img/2/0/7/472207-17864-77-720.jpg)
![Album image #41 Album image #41](/albums/img/2/0/8/472208-17864-81-720.jpg)
I may go back and tone down the contrast a bit with some extrememly thin paint - haven't decided yet.
![Album image #42 Album image #42](/albums/img/0/7/7/478077-17864-73-720.jpg)
I went back and reworked the exhaust stains a bit. I did a second round of oils, and knocked back the overall size of the stains a bit with the airbrush. I like it much better now.
![Album image #43 Album image #43](/albums/img/0/7/8/478078-17864-55-pristine.jpg)
I had a last-minute disaster involving spilling thinner on the right wing, because of course I did.
![Album image #44 Album image #44](/albums/img/0/7/9/478079-17864-68-pristine.jpg)
I wisely put the model down and walked away for a bit, reasoning that it would just be eaiser to repair once dry, but while it dried the thinner ran under the leading edge of the wing and along a panel on the underside, almost to the gear bays.
![Album image #45 Album image #45](/albums/img/0/8/0/478080-17864-91-pristine.jpg)
With the gear already attached, I was afraid sanding was too much of a knock-everything-off risk (remember, I’m the klutz who spilled thinner on this thing in the first place) so I used alcohol to strip and repaint the affected area.
![Album image #46 Album image #46](/albums/img/0/8/1/478081-17864-57-pristine.jpg)
Some sanding turned out to be necessary to feather everything together, but in the end, after a coat of Tamiya X-35 Semi-Gloss to match the rest of the airframe, the repair is hard to see.
![Album image #47 Album image #47](/albums/img/0/8/2/478082-17864-28-pristine.jpg)
I've posted photos of the process so you can see how much work my clumsiness cost me!
![Album image #48 Album image #48](/albums/img/0/8/3/478083-17864-81-pristine.jpg)
![Album image #49 Album image #49](/albums/img/0/8/4/478084-17864-83-pristine.jpg)
![Album image #50 Album image #50](/albums/img/0/8/5/478085-17864-72-pristine.jpg)
With that behind me, small exterior details are all that's left!
![Album image #51 Album image #51](/albums/img/7/9/2/478792-17864-95-pristine.jpg)
1.3mm MV lenses for the formation lights. I didn't realize it until I went to install them, but these lenses are rounded on the back, so they need to sit in a small recessed hole in order to mount properly.
![Album image #52 Album image #52](/albums/img/7/9/3/478793-17864-79-720.jpg)
Whip antennae are from copper wire.
![Album image #53 Album image #53](/albums/img/7/9/4/478794-17864-10-pristine.jpg)
Tail nav light and dorsal strobe are resin CMK items. Not as sparkly as the MV lenses, but still look great after a coat of clear varnish.
![Album image #54 Album image #54](/albums/img/7/9/5/478795-17864-95-720.jpg)
The resin CMK items were very easy to work with and attach with PVA glue.
![Album image #55 Album image #55](/albums/img/7/9/6/478796-17864-48-720.jpg)
I used Uschi van der Rosten elastic thread for the aerial wire.
![Album image #56 Album image #56](/albums/img/7/9/7/478797-17864-12-720.jpg)
The insulators are small blobs of PVA glue, left to dry, then painted with Gunze Off White.
![Album image #57 Album image #57](/albums/img/7/9/8/478798-17864-98-pristine.jpg)
A minor miracle: this tiny antenna mast survived the entire build without ever being broken off!
![Album image #58 Album image #58](/albums/img/7/9/9/478799-17864-91-720.jpg)
Some quick finished photos.
![Album image #59 Album image #59](/albums/img/8/0/0/478800-17864-76-720.jpg)
I'll go back and take some higher quality photos soon.
![Album image #60 Album image #60](/albums/img/8/0/1/478801-17864-88-720.jpg)
In the meantime, here's some iPhone shots taken in my paint booth.
![Album image #61 Album image #61](/albums/img/8/0/2/478802-17864-27-720.jpg)
![Album image #62 Album image #62](/albums/img/8/0/3/478803-17864-87-720.jpg)
![Album image #63 Album image #63](/albums/img/8/0/4/478804-17864-50-720.jpg)
![Album image #64 Album image #64](/albums/img/8/0/5/478805-17864-12-720.jpg)
![Album image #65 Album image #65](/albums/img/8/0/6/478806-17864-27-720.jpg)
![Album image #66 Album image #66](/albums/img/8/0/7/478807-17864-46-720.jpg)
Can you spot my stupid, unfixable mistake? :/
![Album image #67 Album image #67](/albums/img/8/0/8/478808-17864-82-720.jpg)
Yorumlar
12 January 2018, 21:27
![](/profiles/img/10792-966-s.jpg)
Very nice work at the cockpit and interesting pre shading technique 👍
13 January 2018, 18:19
![](/profiles/img/17864-664-s.jpg)
Thanks, everyone! I have moved on to the weathering - just uploaded a few more photos.
28 April 2018, 19:11
![](/profiles/img/23938-707-s.jpg)
Looking awesome. Great recovery at the end, I think we have all been there 😄 👍
29 May 2018, 12:25
Album info
Known as the "Hirohito Special," the 10,000th Hellcat built was an F6F-5 delivered to VBF-87 aboard USS Ticonderoga in May of 1945.