RF-4E Phantom II, End of the filmGörünüm: Slayt gösterisi Mozaik Liste 1January 16, 2018just to be sure what to remove, alter or keep 😉 2January 16, 2018thinned the upper wings with an old scalpel to approx. 1/3 of the original thickness 3January 16, 2018removed the existing wheelbays with a scriber, thinned the wall also to 1/3 of the original thickness 4January 16, 2018a lot of material to be removed from the resin bays... maybe a little to much... 5January 16, 2018Flush fit on this side 6January 16, 2018flush fit with the green border... 1mm gap on the indicated side 7January 16, 2018so more filling and sanding 8February 15, 2018 9February 15, 2018must the indicated plate be removed to place the cockpit? In other words, must the cockpit be placed flush with the raised part? 10February 15, 2018Assymmetric air inlets 11February 15, 2018complete different shape 12February 15, 2018more symmetrical result, thx to some heating in a micro-wave 13February 15, 2018more symmetrical result, thx to some heating in a micro-wave 14February 15, 2018a lot of material removed from the hull... Yorumlar18 October 2024, 08:28 - Project infoRF-4E Phantom II, End of the film14 Görüntüler1:48fikirler7+Tüm albümlerTüm albümleri görüntüle »
ölçekli modelleme veritabanı | depo yöneticisiölçekli modelleme veritabanı | depo yöneticisi
