ölçekli modelleme veritabanı | depo yöneticisi
selman
Selman Yarar (selman)
TR

HMS Buttercup

Yorumlar

12 31 December 2020, 16:19
Mario Thomas
Nice and clean Build.
1 January 2021, 01:38
Selman Yarar
thanks, it was not an ideal build, i made a lot of mistakes. I'll do some weathering and rust spots later, similar to the box art...
1 January 2021, 08:15
David Taylor
Whats the boom on the front Selman.
1 January 2021, 08:57
Selman Yarar
David it is called "acoustic hammer". I found some information at mcdoa.org.uk/development_of_minewarfare.htm: "The first known use of an acoustic mine occurred in 1940. However work on an acoustic countermeasure had already been initiated by HMS Vernon and the Sweeping Division of its Mine Design Department. This resulted in the SA acoustic hammer box in the bow compartment of a vessel (usually a converted trawler) but later bow-mounted about 12 feet below the water. By 1942, the bow mounted hammer box was one of the most common acoustic countermeasures and was being streamed abeam, usually in combination with the LL magnetic sweep. The hammer boxes contained a pneumatic or electric driven riveting hammer mounted to strike against a 7/16 inch thick 19 inch diameter steel diaphragm. The pneumatic hammers proved more reliable than the electric type and were incorporated into the standard hammer box designated 'A Mark 1' which was either suspended over the bow of a minesweeper or towed in combination with the magnetic sweep"
1 January 2021, 11:34
David Taylor
Learn something new everyday.Thanks
1 January 2021, 15:11
Łukasz Gliński
Very neat 👍
1 January 2021, 19:21
Rui S
Impressive collection 👍
21 May 2022, 19:27

Project info

11 Görüntüler
1:144
Tamamlanan
1:144 Flower Class Corvette "HMS Buttercup" (Revell 05158)
HMS Buttercup (K193)
GB Royal Navy (1546-now)
HMS Buttercup K193
1942
 

Tüm albümler

Tüm albümleri görüntüle »