ölçekli modelleme veritabanı | depo yöneticisi
christian-w
Christian W (christian-w)
DE

2002 Camaro SS - wip

Yorumlar

8 6 April 2021, 21:23
István Szücs
Great, I'm watching!

I also have this Camaro. But the decals are damaged- exactly the decal of the roof. Do you have tip, how can I paint the roof? For example Tamiya clear smoke on (gloss) black? Could it work?
7 April 2021, 11:12
Dominik Weitzer
Istvan, i painted some clear parts with tamiya smoke and it worked. but i had always to tape the backside of the part because of the spraydust(?). Layer for layer to get the darkness i wanted. I always painted the inside. it had to dry for a couple days (perhaps more than a week).
Christian painted a roof from a C7 Corvette - inside blue, outside black. perhaps, he shows it here
10 April 2021, 09:24
István Szücs
Thank you! But the problem is the roof is not made of glass. That's why I thought to paint black under the smoke.
10 April 2021, 11:44
Christian W
I took the roof of, made a mold and used clear resin for a replica. Then I was in the position, to paint it like the original.
For the underside I used Revell clear blue and on the top Tamiya smoke. Finally I used "Future" to give it the right glossy shine. I tried some clear cote but that worked not out.

2016 Corvette Stingray Coupe C7 (red) | Project by christian-w (1:25)

I would go this way with a solid plastic roof:
I think, to paint it black and than smoke will have no effect. I think, it only gives the black a kind of clear cote. Maybe it looks more black.
What I'll try is to paint an iron metallic instead of black and than use more smoke over that. So much that you barely can see the basecolor through it.
It could give you a better effect. I would try this.
11 April 2021, 07:23
Dominik Weitzer
sounds interesting
11 April 2021, 11:59
István Szücs
Cool, I'll try, thank you so much.
11 April 2021, 12:39
Christian W
You're welcome! If it helps, it good!
11 April 2021, 16:30
Dominik Weitzer
looks much better with open airintake
26 April 2021, 05:10
Bob Hall
Catfish Camaro !
26 April 2021, 05:37
Christian W
@Bob ... because of the "look" of the car?

Thanks, Dominik
26 April 2021, 07:57
Bob Hall
[img1]
 


Just a nickname for them here.
26 April 2021, 08:48
Christian W
😄 I thought so 🙂
26 April 2021, 09:53
Nigel Chapman
simple yet effective
26 April 2021, 14:12
Christian W
A little step forward. Everything what has to be black is fine and some painting on the chassis.
Next step is to paint the aluminum parts and wet sending the body.
10 May 2021, 19:35
Dominik Weitzer
Well!
12 May 2021, 05:27
Christian W
It's a long time ago, I laid handy on this sweet little muscle car. Well, it's painted already. Just plain white and awaiting it's final clear cote.
8 June 2021, 19:07
Bob Hall
AHH ! A mighty fine "Mustang Taillight Inspection Vehicle " LOL !!!!!!!!!!!!!!!!
8 June 2021, 19:09
Christian W
*lol*
8 June 2021, 19:36
Dominik Weitzer
*lol* "Mustang Taillight Inspection Vehicle "

keep it coming!
10 June 2021, 07:02
Christian W
The black parts on the body are done.
13 June 2021, 18:46
Christian W
Details at the chassis painted.
21 June 2021, 19:38
Christian W
The black was not amused of the clear coat. So it decided to get rid of the roof 😄.
Second try will be with 2K clear coat. I'm angry about the second round because the white was perfect. Not a little bit of dust on it.
27 June 2021, 09:56
Christian W
Interior and under carriage ist done.
27 June 2021, 22:26
István Szücs
Nice clean build! Will you eliminate the trademark logo on the right?
28 June 2021, 09:23
Christian W
Good point. I saw it after painting, that it is more present than on a black chassis. I don't really not know. I guess not. I used a rattle can with an other white than the tins I have. Maybe. I overthink this.
28 June 2021, 09:53
Dominik Weitzer
I've just thought about...perhaps it was possible to remove only the black paint? i think i had tried this before removing all the paint.
what have you done with the paint now? removed the complete color?
28 June 2021, 13:39
Christian W
I removed everything and started new. The base color was strong enough to stay on the plastics. SO I had to sand it smooth. Then the new layer of white. Looks not bad so far. Some spots to lay hands on but not much.
The next step will be the black roof again. Then 2K clear cote.
28 June 2021, 22:49
Christian W
Finally the clear cote is done. Up for the finish.
23 September 2021, 15:38
Dominik Weitzer
now that looks great!
24 September 2021, 06:06
Christian W
Did some decals into the engine compartment and dash board. The end is near 😄
27 September 2021, 11:10
Christian W
Everything is done. Ready for completing
27 September 2021, 19:48
Nigel Chapman
Looking good
27 September 2021, 20:07
Dominik Weitzer
well well!
28 September 2021, 05:20
Christian W
Thanks guys 🙂

It is nearly done. Gladly.
5 October 2021, 18:41
Dominik Weitzer
hurrah! like it.
6 October 2021, 04:57
István Szücs
Very nice in white!

The fit of the front bumber is not perfect, but it's not your fault. Congrats!
6 October 2021, 08:11
Christian W
You're right. Before all the painting, I sanded anyway. There was better fitting also with the hood. It is very tight everything.
Thank you!
6 October 2021, 11:23
Christian W
I think that's it. Taking pictures for the gallery.
8 October 2021, 16:50

Album info

Aiming for a white Camaro SS with tinted windows and rims of a 1996 Collector Edition Corvette C4

42 Görüntüler
1:25
Tamamlanan
1:25 Corvette (AMT/ERTL 8031)1:25 2002 Camaro 2 'n 1 (Monogram 85-4273)

Tüm albümler

Tüm albümleri görüntüle »