2002 Camaro SS - wip
Yorumlar
8 6 April 2021, 21:23
István SzücsGreat, I'm watching!
I also have this Camaro. But the decals are damaged- exactly the decal of the roof. Do you have tip, how can I paint the roof? For example Tamiya clear smoke on (gloss) black? Could it work?
7 April 2021, 11:12
Dominik WeitzerIstvan, i painted some clear parts with tamiya smoke and it worked. but i had always to tape the backside of the part because of the spraydust(?). Layer for layer to get the darkness i wanted. I always painted the inside. it had to dry for a couple days (perhaps more than a week).
Christian painted a roof from a C7 Corvette - inside blue, outside black. perhaps, he shows it here
10 April 2021, 09:24
István SzücsThank you! But the problem is the roof is not made of glass. That's why I thought to paint black under the smoke.
10 April 2021, 11:44
Christian WI took the roof of, made a mold and used clear resin for a replica. Then I was in the position, to paint it like the original.
For the underside I used Revell clear blue and on the top Tamiya smoke. Finally I used "Future" to give it the right glossy shine. I tried some clear cote but that worked not out.
2016 Corvette Stingray Coupe C7 (red) | Project by christian-w (1:25)
I would go this way with a solid plastic roof:
I think, to paint it black and than smoke will have no effect. I think, it only gives the black a kind of clear cote. Maybe it looks more black.
What I'll try is to paint an iron metallic instead of black and than use more smoke over that. So much that you barely can see the basecolor through it.
It could give you a better effect. I would try this.
11 April 2021, 07:23
Christian WA little step forward. Everything what has to be black is fine and some painting on the chassis.
Next step is to paint the aluminum parts and wet sending the body.
10 May 2021, 19:35
Christian WIt's a long time ago, I laid handy on this sweet little muscle car. Well, it's painted already. Just plain white and awaiting it's final clear cote.
8 June 2021, 19:07
Bob HallAHH ! A mighty fine "Mustang Taillight Inspection Vehicle " LOL !!!!!!!!!!!!!!!!
8 June 2021, 19:09
Christian WThe black was not amused of the clear coat. So it decided to get rid of the roof 😄.
Second try will be with 2K clear coat. I'm angry about the second round because the white was perfect. Not a little bit of dust on it.
27 June 2021, 09:56
István SzücsNice clean build! Will you eliminate the trademark logo on the right?
28 June 2021, 09:23
Christian WGood point. I saw it after painting, that it is more present than on a black chassis. I don't really not know. I guess not. I used a rattle can with an other white than the tins I have. Maybe. I overthink this.
28 June 2021, 09:53
Dominik WeitzerI've just thought about...perhaps it was possible to remove only the black paint? i think i had tried this before removing all the paint.
what have you done with the paint now? removed the complete color?
28 June 2021, 13:39
Christian WI removed everything and started new. The base color was strong enough to stay on the plastics. SO I had to sand it smooth. Then the new layer of white. Looks not bad so far. Some spots to lay hands on but not much.
The next step will be the black roof again. Then 2K clear cote.
28 June 2021, 22:49
Christian WDid some decals into the engine compartment and dash board. The end is near 😄
27 September 2021, 11:10
István SzücsVery nice in white!
The fit of the front bumber is not perfect, but it's not your fault. Congrats!
6 October 2021, 08:11
Christian WYou're right. Before all the painting, I sanded anyway. There was better fitting also with the hood. It is very tight everything.
Thank you!
6 October 2021, 11:23
Album info
Aiming for a white Camaro SS with tinted windows and rims of a 1996 Collector Edition Corvette C4
