Duvar
Wall
July 23, 2024
July 15, 2024
Andrew Gledhill
yeni bir proje ekledi.
yeni bir proje ekledi.
All comments (9) » 9 8 April, 07:55
Andrew Gledhill
Update 8. 15.07.24. Hi folks. Well, its time to call this one complete. I finished it off with a light coat of Ammo Mig Dust colour paint. I sprayed a thin coat of this along the bottom half of the tank and at the front and back lower portions. I have made a reveal video that I will put on my Youtube channel shortly. Once that is uploaded, I will place a link here. Then mark the project as completed. Thanks for all the interest in my builds so far. Its much appreciated.
Update 8. 15.07.24. Hi folks. Well, its time to call this one complete. I finished it off with a light coat of Ammo Mig Dust colour paint. I sprayed a thin coat of this along the bottom half of the tank and at the front and back lower portions. I have made a reveal video that I will put on my Youtube channel shortly. Once that is uploaded, I will place a link here. Then mark the project as completed. Thanks for all the interest in my builds so far. Its much appreciated.
15 July, 13:45
Andrew Gledhill
Update 9. 15.07.24. Here is the link to my reveal video: Youtube Video
Update 9. 15.07.24. Here is the link to my reveal video: Youtube Video
15 July, 14:53
June 19, 2024
May 31, 2024
Andrew Gledhill
Hi folks. Has anybody built this kit? I was gifted it by Models for Heroes. I seem to be missing a ring around one of the hatches. Part R5 in the instructions. There is no R sprue in the instructions and no other R parts listed on the instructions. Checked all sprues and its not in the box at all.
Hi folks. Has anybody built this kit? I was gifted it by Models for Heroes. I seem to be missing a ring around one of the hatches. Part R5 in the instructions. There is no R sprue in the instructions and no other R parts listed on the instructions. Checked all sprues and its not in the box at all.
31 May, 14:56
May 29, 2024
May 26, 2024
Andrew Gledhill
yeni bir proje ekledi.
yeni bir proje ekledi.
All comments (7) » 8 1 March, 16:34
Andrew Gledhill
Update 6. 14.03.24. Well, things are coming along quite nicely now. I have finished the island control centre apart from the rigging. Waiting on some gel super glue to come to do that. If you look at the photos, you will see that I placed some of those Eduard PE figures inside the bridge areas. Not that many because you can hardly see them. I have placed one guy saluting in there lol. The kit does not come with clear parts for the windows. I made window parts from cuts of a clear acetate sheet, then glued them inside. You can get a pack of 10 sheets of acetate from Amazon for £5. Great for making windows out of. The last gun emplacement has also been fixed to the ship. All that is left to do now, is the cranes and tugs etc. Then its onto the aircraft. I have also got to fit all the aerials to the hull. But I will do that last. Anyway, that's it for now.
Update 6. 14.03.24. Well, things are coming along quite nicely now. I have finished the island control centre apart from the rigging. Waiting on some gel super glue to come to do that. If you look at the photos, you will see that I placed some of those Eduard PE figures inside the bridge areas. Not that many because you can hardly see them. I have placed one guy saluting in there lol. The kit does not come with clear parts for the windows. I made window parts from cuts of a clear acetate sheet, then glued them inside. You can get a pack of 10 sheets of acetate from Amazon for £5. Great for making windows out of. The last gun emplacement has also been fixed to the ship. All that is left to do now, is the cranes and tugs etc. Then its onto the aircraft. I have also got to fit all the aerials to the hull. But I will do that last. Anyway, that's it for now.
14 March, 16:30
Andrew Gledhill
Update 7. 26.05.24. Its been awhile since I posted an update on this one. I took a bit of a break from it to concentrate on the C2 Mexas kit. Anyway, I have more or less finished the ship itself. I still have to do the island rigging. Plus paint some of the antennas etc. I have been slowly working on the air wing. I have a load of after market Star Fighter Decals for aircraft. So far, I have finished 2 x E2 Hawkeye's and 2 x A6 Prowlers. I have also finished painting 8 x FA-14 Tomcats. But I have only applied decals to one of those. There are still many aircraft to build up and paint. Oh and I have made up and painted all the cranes and tugs. That's it for now. Enjoy.
Update 7. 26.05.24. Its been awhile since I posted an update on this one. I took a bit of a break from it to concentrate on the C2 Mexas kit. Anyway, I have more or less finished the ship itself. I still have to do the island rigging. Plus paint some of the antennas etc. I have been slowly working on the air wing. I have a load of after market Star Fighter Decals for aircraft. So far, I have finished 2 x E2 Hawkeye's and 2 x A6 Prowlers. I have also finished painting 8 x FA-14 Tomcats. But I have only applied decals to one of those. There are still many aircraft to build up and paint. Oh and I have made up and painted all the cranes and tugs. That's it for now. Enjoy.
26 May, 07:24
Andrew Gledhill
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
All comments (10) » 25 1 March, 16:41
Gary Victory
Nice progress Andrew, I can only guess how big that thing is....! Following your progress.
Nice progress Andrew, I can only guess how big that thing is....! Following your progress.
13 March, 14:15
May 15, 2024
May 5, 2024
April 16, 2024
April 14, 2024
April 12, 2024
March 30, 2024
March 28, 2024
Andrew Gledhill
bu öğenin sahibi
bu öğenin sahibi
Pz.Kpfw. VI Sd.Kfz. 182
Tiger II (Porsche Early production vehicle) Fgst.Nr.280009 HobbyBoss 1:35
84558 2022 Yeni parçalar 28 March, 08:44
March 21, 2024
March 13, 2024
Andrew Gledhill
bu öğenin sahibi
bu öğenin sahibi
EA-6B Prowlers VMAQ-2 Play Boys Air Wing 8 USS Nimitz 1981
Starfighter Decals 1:350
350117 13 March, 10:42
Andrew Gledhill
bu öğenin sahibi
bu öğenin sahibi
VF213 Black Lions 1980s Low Viz F14 Tomcat
Starfighter Decals 1:350
350203 13 March, 10:42
Andrew Gledhill
bu öğenin sahibi
bu öğenin sahibi
VA-22 Fighting Redcocks CVW-11 1980s High Viz
Starfighter Decals 1:350
350204 13 March, 10:41
Andrew Gledhill
bu öğenin sahibi
bu öğenin sahibi
VS-21 Fighting Redtails 1984 S-3 Viking
Starfighter Decals 1:350
350210 13 March, 10:41
Andrew Gledhill
bu öğenin sahibi
bu öğenin sahibi
VA-82 Marauders 1978-1981
Starfighter Decals 1:350
350-116-S 13 March, 10:39
March 9, 2024
March 7, 2024
February 27, 2024
Andrew Gledhill
I am looking for an aircraft set of decals for my Tamiya Enterprise. Any idea where I can order these. I am in the UK.
I am looking for an aircraft set of decals for my Tamiya Enterprise. Any idea where I can order these. I am in the UK.
CVN-65 USS Enterprise - Carrier Air Wing (CVW-11) 1982
Boatswain Model 1:350
D350-005 27 February, 16:00
Andrew Gledhill
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
All comments (6) » 18 31 January, 20:44
Andrew Gledhill
Thanks Drew Z. They supply PE fan covers for the 6 fans of the Air Con Unit. But there are no actual fans behind those screens lol.
Thanks Drew Z. They supply PE fan covers for the 6 fans of the Air Con Unit. But there are no actual fans behind those screens lol.
19 February, 16:09
Andrew Gledhill
yeni bir proje ekledi.
yeni bir proje ekledi.
All comments (8) » 6 31 January, 20:38
Andrew Gledhill
Update 7. 25.02.24. I have now done the first stage of weathering. I sprayed some Ammo Mig Jet Exhaust Burnt Iron into the engine intake grills. Then a Dark Dirt Florymodels Clay Wash was applied to the whole vehicle. Once this was dry, I went over it with a cotton bud. Rubbing most of the wash back off. This left dirt in the recesses, panel lines and around bolt heads etc. I then did some streaking with a Green Oil Paint. Once this was left overnight to dry, I covered the whole thing in a Matt Coat. I also finished painting the 2 jerry cans, and got these mounted in their rack. The next thing to do is to put some pastels of dust and muck over it. Then try some mud effects around the undersides and wheels. Then a dust coat will be applied. That's all for now. Enjoy.
Update 7. 25.02.24. I have now done the first stage of weathering. I sprayed some Ammo Mig Jet Exhaust Burnt Iron into the engine intake grills. Then a Dark Dirt Florymodels Clay Wash was applied to the whole vehicle. Once this was dry, I went over it with a cotton bud. Rubbing most of the wash back off. This left dirt in the recesses, panel lines and around bolt heads etc. I then did some streaking with a Green Oil Paint. Once this was left overnight to dry, I covered the whole thing in a Matt Coat. I also finished painting the 2 jerry cans, and got these mounted in their rack. The next thing to do is to put some pastels of dust and muck over it. Then try some mud effects around the undersides and wheels. Then a dust coat will be applied. That's all for now. Enjoy.
25 February, 14:30
Andrew Gledhill
Update 8. 27.02.24. OK, I am going to call this done for now. Today I finished off the weathering. First I rubbed a Dirt powder from a Tamiya weathering set all over it using some make up eye dabber things. I rubbed this all over the tyres too. This gave it a dusty look. Next I mixed up some Ammo Mug Enamel Liquid Mud with some Ammo Mig Earth Pigment Powder. I then painted this mixture all over the undersides behind the wheels etc. Then before it dried, I dusted on some of the earth powder. Once dry, this gave the effect of dried on mud. First time I have used this stuff, and I am quite impressed with the results. I will add some pics of the stuff I used to the album. I then sprayed a light coat of heavily thinned Ammo Mig Dust paint along the lower portions of the front, sides and rear. I have gone for minimal stowage items at this stage. Just a couple of ammo boxes, a small pack, a ration pack box, and a M60 Machine gun. Then I finished it off with some stretched sprue aerials. Unfortunately, due to the tiny hinge parts. I could not make the hatches to be open-able. There is no interior detail anyway, so it doesn't really matter. I may add other stowage items at a later date. But for now, I am going to say that this mostly enjoyable build, is now complete. Thanks for all the interest and positive feedback.
Update 8. 27.02.24. OK, I am going to call this done for now. Today I finished off the weathering. First I rubbed a Dirt powder from a Tamiya weathering set all over it using some make up eye dabber things. I rubbed this all over the tyres too. This gave it a dusty look. Next I mixed up some Ammo Mug Enamel Liquid Mud with some Ammo Mig Earth Pigment Powder. I then painted this mixture all over the undersides behind the wheels etc. Then before it dried, I dusted on some of the earth powder. Once dry, this gave the effect of dried on mud. First time I have used this stuff, and I am quite impressed with the results. I will add some pics of the stuff I used to the album. I then sprayed a light coat of heavily thinned Ammo Mig Dust paint along the lower portions of the front, sides and rear. I have gone for minimal stowage items at this stage. Just a couple of ammo boxes, a small pack, a ration pack box, and a M60 Machine gun. Then I finished it off with some stretched sprue aerials. Unfortunately, due to the tiny hinge parts. I could not make the hatches to be open-able. There is no interior detail anyway, so it doesn't really matter. I may add other stowage items at a later date. But for now, I am going to say that this mostly enjoyable build, is now complete. Thanks for all the interest and positive feedback.
27 February, 12:52
February 24, 2024
Andrew Gledhill
bu öğeyi istiyor
bu öğeyi istiyor
Big Ed
CVN-65 Enterprise PART II for Tamiya - contains 53233, 53236, 53237 Eduard 1:350
BIG5352 2019 Model seti 24 February, 08:54
Andrew Gledhill
bu öğeyi istiyor
bu öğeyi istiyor
Big Ed
CVN-65 Enterprise PART I for Tamiya - contains 53223, 53224, 53227 Eduard 1:350
BIG5351 2018 Model seti 24 February, 08:54
February 19, 2024
Andrew Gledhill
yeni bir proje ekledi.
yeni bir proje ekledi.
All comments (9) » 9 15 May 2023, 14:27
Andrew Gledhill
Update 8, 30.01.24. Things are coming along nicely now. Last night I tried spraying the Light Florymodels Clay Wash over the model. But I have the older wash. It was a bit too thin and was not spraying that well. So, I ended up painting it on liberally with a brush. It looked awful last night when it was still wet. But this morning when it had dried, it didn't look too bad. The good thing about these washes, is that you can remove it with water. So, by dipping a cotton bud in water, I was able to wipe off the wash in areas where I didn't want it. Areas such as the number plates and division markings. I was also able to rub parts of the wash with the dry cotton bud. I think it looks not too bad. I imagine that this vehicle is coming to the end of winter, and parts of the white wash have been lost over the months due to rain etc. I have also now fitted the acetate windscreen glass, and done some dry brushing of the canvas cab cover. Then the whole thing has been sealed in with a matt coat. I have some tools to paint next, then it will be onto the figures. I may try to paint some rust effects on the back bed of it. Not sure yet on that one. Enjoy, and thanks for looking.
Update 8, 30.01.24. Things are coming along nicely now. Last night I tried spraying the Light Florymodels Clay Wash over the model. But I have the older wash. It was a bit too thin and was not spraying that well. So, I ended up painting it on liberally with a brush. It looked awful last night when it was still wet. But this morning when it had dried, it didn't look too bad. The good thing about these washes, is that you can remove it with water. So, by dipping a cotton bud in water, I was able to wipe off the wash in areas where I didn't want it. Areas such as the number plates and division markings. I was also able to rub parts of the wash with the dry cotton bud. I think it looks not too bad. I imagine that this vehicle is coming to the end of winter, and parts of the white wash have been lost over the months due to rain etc. I have also now fitted the acetate windscreen glass, and done some dry brushing of the canvas cab cover. Then the whole thing has been sealed in with a matt coat. I have some tools to paint next, then it will be onto the figures. I may try to paint some rust effects on the back bed of it. Not sure yet on that one. Enjoy, and thanks for looking.
30 January, 10:20
Andrew Gledhill
Update 9, 19.02.24. OK, the tools have been painted and glued onto the side screens. Next I have done some rust effects on the rear deck and mudguards etc. I put some Mr Surfacer 500 down first. Let it dry for 15 minutes. Then stippled it with an old brush to roughen up the surface. Then I painted over this with Ammo Mig Rust paints of various shades. At first it was a bit too much. Especially on the rear deck. So I toned the rust effects down a bit by adding more of the light Florymodels clay wash. I am calling the main painting and weathering done now. Next I have to build up and paint the 5 figures, plus all the ammo boxes and equipment etc. Enjoy.
Update 9, 19.02.24. OK, the tools have been painted and glued onto the side screens. Next I have done some rust effects on the rear deck and mudguards etc. I put some Mr Surfacer 500 down first. Let it dry for 15 minutes. Then stippled it with an old brush to roughen up the surface. Then I painted over this with Ammo Mig Rust paints of various shades. At first it was a bit too much. Especially on the rear deck. So I toned the rust effects down a bit by adding more of the light Florymodels clay wash. I am calling the main painting and weathering done now. Next I have to build up and paint the 5 figures, plus all the ammo boxes and equipment etc. Enjoy.
19 February, 16:18
Andrew Gledhill
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
All comments (10) » 19 15 May 2023, 14:35
Olivier
Quite nice so far. I like the underside. What colour will you chose for the tarpaulin ?
Quite nice so far. I like the underside. What colour will you chose for the tarpaulin ?
23 January, 16:32
February 12, 2024
Andrew Gledhill
yeni bir fotoalbüm ekledi.
yeni bir fotoalbüm ekledi.
All comments (21) » 27 20 January 2022, 18:49
Jennifer Franklin
That is a lot of stuff in the back. Where did you get all the paraphernalia? Nice model.
That is a lot of stuff in the back. Where did you get all the paraphernalia? Nice model.
12 February, 19:34
January 31, 2024
January 28, 2024
January 23, 2024
January 6, 2024
January 2, 2024
December 16, 2023
December 13, 2023
December 8, 2023
November 23, 2023
October 17, 2023
September 29, 2023
September 27, 2023
September 26, 2023
September 24, 2023
September 23, 2023
September 1, 2023
August 18, 2023
wnolder.php?lang=tr
2023-08-18 17:40:10
2021-03-27 18:16:06
95096
/ajax/wnolder.php?lang=tr&sd=2023-08-18 17:40:10&md=2021-03-27 18:16:06&filter=&w=95096
todo