Canberra PR.9 XH175 - Xtrakit 1/72Görünüm: Slayt gösterisi Mozaik ListeYorumlar11 October 2024, 23:25 - Project infoCanberra PR.9 XH17562 Görüntüler1:72Tamamlanan4+Tüm albümlerTüm albümleri görüntüle »
![](/albums/img/0/6/6/1096066-10003-93-p.jpg "The kit offers only a closed canopy. As I want to show it in an open position I'll need the cut the one-piece canopy in three parts: Windscreen, main canopy and the "bulge" behind the canopy that is part of the fuselage. This bulge will go to the right of the pencil. Here I am making a template to cut some plasticsheet in order to bolster up the area behind the cockpit. The kit part looks a bit too shallow in this area. | View full picture")
![](/albums/img/5/0/5/1109505-10003-26-p.jpg "The ejector pin marks have been eliminated and I'm now adding some wiring to make it look "busy", loosely based on what's visible in the CMK parts and my reference pictures. | View full picture")
![](/albums/img/5/0/4/1109504-10003-30-p.jpg "Excursus: I'd like to try the "dissolved plastic putty" method which Thomas Kolb has described before (see discussion of this build thread). Therefore I've purchased a new bottle of Tamiya Extra Thin Cement and put my side cutter to good work. | View full picture")
![](/albums/img/9/8/0/1120980-10003-62-p.jpg "The jet exhausts are now assembled and have been painted with Alclad II. Some finishing touches were applied with "soot" from Tamiyas "weathering master B" set. | View full picture")
![](/albums/img/0/4/3/1144043-10003-34-p.jpg "The first "real" colour has been sprayed on! Xtracrylix' "RAF Light Aircraft Grey" for the belly of this not so small jet. | View full picture")
![](/albums/img/9/7/7/1150977-10003-88-p.jpg "I spent several hours masking the "disruptive camouflage" pattern. Different aircraft show slightly different patterns. And even one and the same aircraft can be seen with different patterns on different photos. I tried to get as close to "reality" for my XH175 airframe as possible - but I'm sure there's more than one mistake. The white paper circle matches the size of the wing's RAF roundel. Like this I was able to check the relative position of the grey and green camouflage to the roundel. | View full picture")
ölçekli modelleme veritabanı | depo yöneticisiölçekli modelleme veritabanı | depo yöneticisi
