MP4/6 2022 Resumption: Bodywork

1
May 6, 2022
Decided to start out by testing Tamiya TS-36 spray for the fluoro red color. Maybe this was due to the rattle can being purchased when I got the model ~6 years ago, but it wasn't as good as the other Tamiya sprays.
2
May 6, 2022
Though I started painting the body in 2017, I stripped it down and re-painted using the airbrush instead of rattle cans.

I did a lot of sanding between rounds of paint for an extra smooth finish!
3
May 6, 2022
Front wing end plates
4
May 6, 2022
Carefully cut Fujimi's masking template out, then created my own just in case of mistakes.
5
May 6, 2022
Another view of the masking. I think the "hips" of the red paint are too high up on the bodywork - they should be right at that edge - but I couldn't find much to confirm or deny, and that's where the masking fit best so I just went with it.
6
May 6, 2022
Airbrushed Mr Color 171 Fluorescent Red. This was the closest match I could find for RAL3024. Didn't match the kit decals, but perfectly matched the MSM decals.
7
May 6, 2022
Moment of truth - pulling this masking was nerve wracking.
8
May 6, 2022
Unfortunately some of the white paint came off with the tape. Luckily it wasn't in a difficult spot to fix.
9
May 6, 2022
Taped off to fix the spot
10
May 6, 2022
Patched up and ready for sanding.
11
May 6, 2022
Aaaaaand it's blended.
12
May 6, 2022
Nose cone decaled
13
May 6, 2022
Test fitting
14
May 6, 2022
Rear wing endplates decaled - I'd end up having a bunch of problems with the red paint on the left side end plate.
15
May 6, 2022
Decals on, love the way it looks!
16
May 6, 2022
The finish came out a little chalky after all the sanding, so I might not be able to get that deeeeeep gloss after clear coat. But at this point I'm just happy to have a smooth and colorfast finish to work with.
17
May 6, 2022
18
May 6, 2022
19
May 6, 2022
Rear wing shot from it's good side 🙂

Yorumlar

2 6 May 2022, 14:40

Mona
👍👍 🙂

6 May 2022, 15:09

Album info

Could I learn to love again? Pulled this from the stash after 6 years of sitting half-done. Wasn't confident enough in my abilities circa 2017 to paint the bodywork for this car and do it justice. After all I've learned in the time since...could I make a good model out of this now?

McLaren MP4/6

65 Görüntüler

1:20

Tamamlanan

1:20 McLaren MP4/6 Japan GP (Fujimi 09188)

1:20 MP4/6 Full Decal (MSM Creation MSMD140)

1:20 1.6mm Electronic Connectors (Brass Type) 1/20-1/24 (Top Studio TD23134)

Tüm albümler

Tüm albümleri görüntüle »