Firebird Monster!
Yorumlar
7 7 May 2022, 19:32
![](/profiles/img/18821-901-s.jpg)
Nice to see one built. Sadly the white plastics comes through on the edges. Didn't you base coated it?
9 May 2022, 04:15
![](/profiles/img/user-s.jpg)
Since primers are hard to come by on my local hobby shops i had to choose which kits got it, but lesson learned, this and the RX-7 gave me problems, although when I sprayed the base coats it was fine, the white edges came out when I used gloss clear 😭
9 May 2022, 17:47
![](/profiles/img/18821-901-s.jpg)
It looks like a pearl metallic. I painted a Camaro really dark green and was afraid that exactly that will happen. I painted a black base color. Then only a thin layer of the pearl metallic. That works out fine.
By the way: the green Firebird I have in process underwent the same procedure. The base color (original green) looked always thin on the edges. Then I used black and it turned out perfectly.
Sorry for you, regarding the lack of proper material.
9 May 2022, 20:10
![](/profiles/img/user-s.jpg)
Thanks for the heads up!! I'm learning which sprays work good without primer and which do! I learned this the hard way when I got the rx-7, the paint did not want to stick, had to remove the paint, sand it and start the process over 😭!
13 May 2022, 02:34
![](/profiles/img/25292-311-s.jpg)
But with all the trouble it looks good. the finish is very shiny 🙂
Painting is always a gamble...some time it works like a homerun, sometimes not. I have three model "since years" where i had to start new, really close before the finish line...the had all bmf, clearcoat and ready for final assembly. that s****...but it is one part of our hobby :-D
13 May 2022, 09:11
![](/profiles/img/user-s.jpg)
Thanks!! I tried to be consistent but I have had the worst luck with Tamiya smoke and Testors custom gloss black, it's always 50/50 either it works or doesn't and right now I'm in the middle of removing the paint on 3 kits, but no problems with clear coats haha
17 May 2022, 13:57