Стрічка новин
Bruce Huxtable
додав новий фотоальбом.
додав новий фотоальбом.
33 зображення
Me 262 B-1Новий: 21 July, 15:30 1:72
Decals being added, after a gloss coat. Just some stencils to add, plus signs on the front of the engines.
Проект: Me 262 B-1a/U1
15 23 June, 15:50
Bruce Huxtable
Welcome, Nicolas. This kit has raised panel lines, and I have no idea how they will enhance or detract... Some might re-scribe, but I'm going to work with it, as is.
Welcome, Nicolas. This kit has raised panel lines, and I have no idea how they will enhance or detract... Some might re-scribe, but I'm going to work with it, as is.
23 June, 18:01
Bruce Huxtable
Welcome, Mirko. I've moved onto the decals, so more photos later in the week. Lots of small parts to add, plus the canopy too, of course.
Welcome, Mirko. I've moved onto the decals, so more photos later in the week. Lots of small parts to add, plus the canopy too, of course.
30 June, 19:22
Bruce Huxtable
Welcome, Andrew. I won't be able to finish this before going on summer holiday, but hopefully I'll install the undercarriage and their covers.
Welcome, Andrew. I won't be able to finish this before going on summer holiday, but hopefully I'll install the undercarriage and their covers.
2 July, 16:34
Bruce Huxtable
Welcome, Neil, and many thanks for your 'likes'. No more progress til after returning from summer break .
Welcome, Neil, and many thanks for your 'likes'. No more progress til after returning from summer break .
18 July, 05:30
James Hunt
позначив цей предмет як замовлений
позначив цей предмет як замовлений
LB-Works Lamborghini Murcielago Ver. 2 Liberty Walk Series No. 22
Aoshima 1:24
059944 (22) 2024 Нові деталі 21 July, 15:29
gorby
додав новий фотоальбом.
додав новий фотоальбом.
33 зображення
Don’t get the hump - The Bedford Dromedary1:76
I did conciser having a go at hand writing the 2mm high number on the side of the cab…. took me a while to stop laughing...
Проект: Bedford Dromedary.
19 13 July, 13:59
gorby
New photos start at number 10.
This may give the impression that I've completed this in a couple of weeks...it's been nearer two months. Although the build is complete this update doesn't take us to the end of the build process.
Thanks for having a look. 🙂
New photos start at number 10.
This may give the impression that I've completed this in a couple of weeks...it's been nearer two months. Although the build is complete this update doesn't take us to the end of the build process.
Thanks for having a look. 🙂
16 July, 15:40
gorby
Thanks Alec. I've tried cast parts in resin before and it wasn't very successful, this time I used silicon as the mould and that made all the difference. It's really easy with silicon. 🙂
Thanks Alec. I've tried cast parts in resin before and it wasn't very successful, this time I used silicon as the mould and that made all the difference. It's really easy with silicon. 🙂
17 July, 07:06
bughunter
Holy moly - what a nice little model! Great work so far 👍 Sorry, I was not in the mood to follow all the nice builds here, so I discovered it lately.
And thank you very much for mention me in the album info 😉
Holy moly - what a nice little model! Great work so far 👍 Sorry, I was not in the mood to follow all the nice builds here, so I discovered it lately.
And thank you very much for mention me in the album info 😉
18 July, 06:52
gorby
No problem mate, I have times I'm not in the mood to comment, quite often really as I'm a grumpy old git. 😄
I hope to get the final photos posted at the weekend, it's finally stopped raining here so busy doing other jobs at the moment. 🙂
No problem mate, I have times I'm not in the mood to comment, quite often really as I'm a grumpy old git. 😄
I hope to get the final photos posted at the weekend, it's finally stopped raining here so busy doing other jobs at the moment. 🙂
18 July, 11:13
gorby
Finally got around to taking some photos of this ridiculous beast, thanks you all for following the build. 🙂
Finally got around to taking some photos of this ridiculous beast, thanks you all for following the build. 🙂
20 July, 14:57
gorby
Thanks David. 👍
Thanks Neuling, although you're mistaking me for a proper modeller if you expect a dio. 😄 😄
I have to be in the right mood to to do a dio and at the moment I just feel like building models. 🙂
Thanks David. 👍
Thanks Neuling, although you're mistaking me for a proper modeller if you expect a dio. 😄 😄
I have to be in the right mood to to do a dio and at the moment I just feel like building models. 🙂
21 July, 06:48
Christian Bruer
Wow, very impressive and excellent work with a lot of scratchbuilt parts - love it 👍
Wow, very impressive and excellent work with a lot of scratchbuilt parts - love it 👍
21 July, 13:54
gorby
Thanks very much Christian. Apparently the drivers didn't love them because they were sooooo slow. 🙂
Thanks very much Christian. Apparently the drivers didn't love them because they were sooooo slow. 🙂
21 July, 14:00
Jeremy Hartline
володіє цим предметом
володіє цим предметом
2 cm Flakvierling 38 German 2cm FlaK 38 AA Gun with tow trailer
AFV Club 1:35
AF35149 2012 Нові деталі Багато тем (2)21 July, 15:27
Petr Kokeš
хоче цей предмет
хоче цей предмет
Sd.Kfz. 234/4 Pz. Spähwagen with Full Interior
Rye Field Model (RFM) 1:35
RM-5118 (RM5118) 2024* Нові деталі 21 July, 15:27
Moaske
додав новий фотоальбом.
додав новий фотоальбом.
29 зображення
Sepecat Jaguar GR1 'Desert Cat'Новий: 21 July, 11:56 1:48
Looking like a tough desert cat
Проект: Sepecat Jaguar GR1 'Desert Cat'
9 14 July, 09:18
Ray Loch
Excellent subject from a not so excellent kit, but then again I haven't attempted my Kittyhawk Jaguar yet. Will be watching this one..
Excellent subject from a not so excellent kit, but then again I haven't attempted my Kittyhawk Jaguar yet. Will be watching this one..
15 July, 13:05
Moaske
The Kittyhawk kit is indeed much better. Enjoy building that one. Also operation Granby scheme?
I'm gonna put mine on hold until these arrive: reskit-models.com/in..49&search=jaguar
The kit nozzles are downright unusable (they don't even fit properly! 😂)
The Kittyhawk kit is indeed much better. Enjoy building that one. Also operation Granby scheme?
I'm gonna put mine on hold until these arrive: reskit-models.com/in..49&search=jaguar
The kit nozzles are downright unusable (they don't even fit properly! 😂)
15 July, 17:57
Ray Loch
Most definitely will be doing the Kittyhawk in a Granby scheme. I might get those nozzles as well.
Most definitely will be doing the Kittyhawk in a Granby scheme. I might get those nozzles as well.
18 July, 02:21
Moaske
Still waiting for the resin nozzles, but otherwise finished... 🙂
Additionally to the aftermarket sets, I've so far scratch built and/or raided from the spares box:
-Intake trunks & turbine fans : 3D printed
-Dorsal and wingtip navigation lights
-Some wiring and extra detailing in the wheel wells
-Canopy lift mechanism and inner frame
-Boundary layer fences: butchered from the overwing pylons
-Pitot tube
-Main gear door pull rods
-Stores stabilizer brackets (are these called this way?) on the free hardpoints
-Got low-vis roundel decals from a Tornado kit
The Heller kit itself is very poor...everything about it, even the decals. I'd say avoid it, unless you want a real challenge :-P
Still waiting for the resin nozzles, but otherwise finished... 🙂
Additionally to the aftermarket sets, I've so far scratch built and/or raided from the spares box:
-Intake trunks & turbine fans : 3D printed
-Dorsal and wingtip navigation lights
-Some wiring and extra detailing in the wheel wells
-Canopy lift mechanism and inner frame
-Boundary layer fences: butchered from the overwing pylons
-Pitot tube
-Main gear door pull rods
-Stores stabilizer brackets (are these called this way?) on the free hardpoints
-Got low-vis roundel decals from a Tornado kit
The Heller kit itself is very poor...everything about it, even the decals. I'd say avoid it, unless you want a real challenge :-P
21 July, 12:32
CaptGPF
Poor kit or not, you certainly brought it to its full potential! Can't wait to see the finished build with the cans. 😀
Poor kit or not, you certainly brought it to its full potential! Can't wait to see the finished build with the cans. 😀
21 July, 15:26
Guy Rump
додав новий фотоальбом.
додав новий фотоальбом.
20 зображення
Mitsubishi Ki-46 II Type 100 (Dinah) Hasegawa 2000 tool & boxНовий: 21 July, 15:20 1:72
19 28 April, 12:07
Guy Rump
Made a start on the Ki-46. The interior main colour is Ammo-Mig Interior Mitsubishi. 🙂
Welcome Nicolas, pull up a stool. 🙂 👍
Many thanks mate for your interest and like Sukhoi 242. 👍
Made a start on the Ki-46. The interior main colour is Ammo-Mig Interior Mitsubishi. 🙂
Welcome Nicolas, pull up a stool. 🙂 👍
Many thanks mate for your interest and like Sukhoi 242. 👍
15 May, 19:22
Guy Rump
Today I put the wings together and sprayed the parts which will be the undercarriage with Ammo Mig Mitsubishi interior green.
Thanks Jan! 👍
Many thanks mate for your interest and like Patryk S. 👍
Today I put the wings together and sprayed the parts which will be the undercarriage with Ammo Mig Mitsubishi interior green.
Thanks Jan! 👍
Many thanks mate for your interest and like Patryk S. 👍
16 May, 16:00
Guy Rump
Fuselage together and undercarriage area added to wings. 🙂
Many thanks mates for your interest and likes Pietro DA, Villiers DV & 1 other mate. 👍
Fuselage together and undercarriage area added to wings. 🙂
Many thanks mates for your interest and likes Pietro DA, Villiers DV & 1 other mate. 👍
17 May, 16:50
Guy Rump
Fuselage joined to wings and tail plane added. 🙂
Many thanks mates for your interest and likes Matti T, Vincent, scaleffect & 1 other mate. 👍
Fuselage joined to wings and tail plane added. 🙂
Many thanks mates for your interest and likes Matti T, Vincent, scaleffect & 1 other mate. 👍
18 May, 15:57
Guy Rump
Engines now on. Engine covers and masking of canopy next. 🙂
Many thanks mates for your interest and likes J35J, Mojo DV & Franck D. 👍
Engines now on. Engine covers and masking of canopy next. 🙂
Many thanks mates for your interest and likes J35J, Mojo DV & Franck D. 👍
19 May, 16:57
Guy Rump
Vallejo IJA Dark Green added to the top side of the fuselage and wings. 🙂
Many thanks mate for your interest and like Franck G. 👍
Vallejo IJA Dark Green added to the top side of the fuselage and wings. 🙂
Many thanks mate for your interest and like Franck G. 👍
7 July, 16:03
Guy Rump
Gloss varnish applied and Decals added. Wash applied to panels to weather the aircraft. 🙂
Gloss varnish applied and Decals added. Wash applied to panels to weather the aircraft. 🙂
14 July, 16:17
Guy Rump
And finally complete! Thanks mates for your comments & likes. 👍
Many thanks Lost_Erik for your kind comment, I appreciate it greatlt. 👍
Many thanks mates for your interest and likes William J, Lost Erik, Dave F & NordMito. 👍
And finally complete! Thanks mates for your comments & likes. 👍
Many thanks Lost_Erik for your kind comment, I appreciate it greatlt. 👍
Many thanks mates for your interest and likes William J, Lost Erik, Dave F & NordMito. 👍
21 July, 15:23
dawei xu
додав новий фотоальбом.
додав новий фотоальбом.
11 21 July, 08:32
CaptGPF
Love how you broke up the sea of white with some light weathering and subtle panel lines. The heat staining on the engines is a nice touch. ❤️❤️❤️
Love how you broke up the sea of white with some light weathering and subtle panel lines. The heat staining on the engines is a nice touch. ❤️❤️❤️
21 July, 15:21
Jan P.
хоче цей предмет
хоче цей предмет
Sd.Kfz. 234/4 Pz. Spähwagen with Full Interior
Rye Field Model (RFM) 1:35
RM-5118 (RM5118) 2024* Нові деталі 21 July, 15:19
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=uk
35
35
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo