Стрічка новин
Martin Bishop
володіє цим предметом
володіє цим предметом
Recce Birds RA-5C, U-2R, RF-101, SR-71, RF-4C, C-130B
Wolfpak Decals 1:72
72-032 2010 Нова прес-форма Багато тем (6)31 July, 07:05
Martin Bishop
володіє цим предметом
володіє цим предметом
SR-71 Blackbird Pitot Tube (Designed to be used w/Academy, Hasegawa, Italeri, Monogram & Revell kits.)
Master 1:72
AM-72-119 (MR72119) 201x Нова прес-форма 31 July, 07:04
Martin Bishop
володіє цим предметом
володіє цим предметом
Ground Equipment
USAF A-12 or SR-71 Crew Access StepsAircraft In Miniature Ltd 1:72
GE72031 2017 Нова прес-форма 31 July, 07:04
Albi Hitz
хоче цей предмет
хоче цей предмет
US M4 Sherman T-49 Workable Track Link w/ Duckbill Track Extenders
Gecko Models 1:35
35GM0095 2024 Нова прес-форма 31 July, 07:01
Sid de Koning
хоче цей предмет
хоче цей предмет
CH-53E "Super Stallion" / MH-53E "Sea Dragon" Folded Main Rotor with Blade Fold Restraint Systems (7 Blades - 3 Engines) for A
ResKit 1:48
unknown48 2024* Нова прес-форма 31 July, 07:00
Joe Kim
додав новий фотоальбом.
додав новий фотоальбом.
27 зображення
Grumman F8F-1 Bearcat (Blue Angels Aircraft)1:72
Decals applied and model completed. The DRAW decals behaved very nicely. I followed the included instructions, which mad...
21 21 July, 00:31
Joe Kim
Thanks to all who followed and liked this project. It was a fun build. Planning on eventually doing all of the Blue Angels aircraft through the years.
Thanks to all who followed and liked this project. It was a fun build. Planning on eventually doing all of the Blue Angels aircraft through the years.
30 July, 22:31
Bruno Daniel Albrecht
додав новий фотоальбом.
додав новий фотоальбом.
57 23 July, 18:34
CaptGPF
Stunning build! For some odd reason, my eyes just can't get enough of these photos.
Stunning build! For some odd reason, my eyes just can't get enough of these photos.
24 July, 12:36
Bruno Daniel Albrecht
@Neuling, @Tibor Szilvai, @CaptGPF
Thanks a lot. Glad you like it
@Neuling, @Tibor Szilvai, @CaptGPF
Thanks a lot. Glad you like it
24 July, 21:32
Harald Besold
An extremely good model. At first glance I thought it was 1:48 scale. Really really good!
An extremely good model. At first glance I thought it was 1:48 scale. Really really good!
25 July, 10:47
Bruno Daniel Albrecht
@Harald Besold Thanks for the kind words. I do have sone Phantoms 1/48 in stock. Hope they turn out like this one
@Harald Besold Thanks for the kind words. I do have sone Phantoms 1/48 in stock. Hope they turn out like this one
27 July, 05:49
Michael Kohl
додав новий фотоальбом.
додав новий фотоальбом.
5 зображення
Interflug Iljushin IL-62MНовий: 30 July, 07:23 1:144
At first glace fit of the major parts was good. Unfortunately I didn't manage to glue the window parts level with the fu...
Проект: Interflug Iljushin IL-62
6 30 July, 07:20
Zbynek Honzik
Taking a seat and I keep my fingers crossed that the building will be joyful and successful, Michael!
Taking a seat and I keep my fingers crossed that the building will be joyful and successful, Michael!
30 July, 09:33
Łukasz Gliński
Can't miss an IF project 👍
That windshield is terrible - what's your plan for it?
And most importantly - are you going to build Lady Agnes? 🙂
Can't miss an IF project 👍
That windshield is terrible - what's your plan for it?
And most importantly - are you going to build Lady Agnes? 🙂
30 July, 14:27
Michael Kohl
Hi mates. Nice to have your interest and you on board. Thanks Zbynek. So far it took much more effort than I expected. Lets see how it continues.
@Mr D: childhood memories. I suppose you build it in scale 1:100? VEB Plasticard?
Lukasz, I bent and glued it und sanded it flush afterwards. As I will use the Authentic Airliner decals for the cockpit windows, they do not need to be transparent.
Hi mates. Nice to have your interest and you on board. Thanks Zbynek. So far it took much more effort than I expected. Lets see how it continues.
@Mr D: childhood memories. I suppose you build it in scale 1:100? VEB Plasticard?
Lukasz, I bent and glued it und sanded it flush afterwards. As I will use the Authentic Airliner decals for the cockpit windows, they do not need to be transparent.
30 July, 19:16
Mr D
Hi Michael 👋,
Yes it was the Veb version, very basic....but l was enjoying building it as fast as l could.... Glue finger prints n all 🤣
Can you sort the cockpit glass ?? Surprised.... Zvezda usually very good.
Thanks for your upload..... I'm big Soviet era fan.
Hi Michael 👋,
Yes it was the Veb version, very basic....but l was enjoying building it as fast as l could.... Glue finger prints n all 🤣
Can you sort the cockpit glass ?? Surprised.... Zvezda usually very good.
Thanks for your upload..... I'm big Soviet era fan.
30 July, 20:20
Łukasz Gliński
Good choice Sir, the AA window decals are super cool.
Unfortunately some of their livery decals have some errors.
Good choice Sir, the AA window decals are super cool.
Unfortunately some of their livery decals have some errors.
30 July, 20:24
Michael Kohl
Yeah, I was surprised by the fit issue too. On the upside are definitely very fine and consistent engravings which I hope to preserve.
And - by the way - it won't be Lady Agnes¹. I like to represent the plane I flew to Moscow with. Unfortunately I do not have a picture of this particular aircraft and am thus not sure about it's actual registration. The history of some a/c is available to me, so I can rule out some. And I photographed two parked IL-62M too while taxiing which I can rule out too.
With these informations I ruled out registration: SEW, SEC, SEF, SEG, SEY and SEK. So right now I will go for registration DDR-SET.
¹ a word for those not familiar with Lady Agnes. She is obviously an IL-62M too and was flown to Stölln. After being stripped of everything unnecessary she landed on a 900m grasstrip (how on earth did they manage to get a permission for that?!) and is used now as a Cafe there in it's original Interflug livery.
You've never heard of Stölln? It is located in the federal state of Brandenburg, about 40km west of Berlin and is the oldest aviation site on earth and in the history of mankind. No other that Otto Lilienthal tested some of his gliders there.
Yeah, I was surprised by the fit issue too. On the upside are definitely very fine and consistent engravings which I hope to preserve.
And - by the way - it won't be Lady Agnes¹. I like to represent the plane I flew to Moscow with. Unfortunately I do not have a picture of this particular aircraft and am thus not sure about it's actual registration. The history of some a/c is available to me, so I can rule out some. And I photographed two parked IL-62M too while taxiing which I can rule out too.
With these informations I ruled out registration: SEW, SEC, SEF, SEG, SEY and SEK. So right now I will go for registration DDR-SET.
¹ a word for those not familiar with Lady Agnes. She is obviously an IL-62M too and was flown to Stölln. After being stripped of everything unnecessary she landed on a 900m grasstrip (how on earth did they manage to get a permission for that?!) and is used now as a Cafe there in it's original Interflug livery.
You've never heard of Stölln? It is located in the federal state of Brandenburg, about 40km west of Berlin and is the oldest aviation site on earth and in the history of mankind. No other that Otto Lilienthal tested some of his gliders there.
31 July, 06:57
Martin Bishop
володіє цим предметом
володіє цим предметом
EF-111 - cockpit with 3D decals (Hasegawa) (3D Printed)
ResKit 1:72
RSU72-0210 31 July, 06:56
Martin Bishop
володіє цим предметом
володіє цим предметом
FB-111 - cockpit early modification with 3D decals (Hasegawa) (3D Printed)
ResKit 1:72
RSU72-0209 31 July, 06:56
Jakub Fiala
додав новий фотоальбом.
додав новий фотоальбом.
76 10 June, 22:58
Jakub Fiala
Thank you, mates!
Alec, correct deduction 👍 I see that you are not only a great modeler, but also an experienced detective 😄
Just to clarify, I will not build the new edition in 1:72 scale, but the 1:48 kit, which I have had in my stash for some time.
Thank you, mates!
Alec, correct deduction 👍 I see that you are not only a great modeler, but also an experienced detective 😄
Just to clarify, I will not build the new edition in 1:72 scale, but the 1:48 kit, which I have had in my stash for some time.
11 June, 11:09
Mr D
Nice metal finish 👌.
Glad you showed paints,
I'm struggling to find a good white paint that doesn't need a stupid amount of coats to look white... Any recommendations from anyone be appreciated.
Smart Mustang scheme 👍
Nice metal finish 👌.
Glad you showed paints,
I'm struggling to find a good white paint that doesn't need a stupid amount of coats to look white... Any recommendations from anyone be appreciated.
Smart Mustang scheme 👍
11 June, 20:35
Jakub Fiala
Thank you Nicolas and Mr D!
to Mr D: I use Tamiya LP and Gunze H aplied in several thin layers.
Thank you Nicolas and Mr D!
to Mr D: I use Tamiya LP and Gunze H aplied in several thin layers.
12 June, 13:41
CaptGPF
I agree with Jakob, Tamiya LP white is much easier for me to use. Another trick is to black base the part first, and then lightly coat on the white. For some odd reason, it's easier for me to avoid over-spraying white on that.
I agree with Jakob, Tamiya LP white is much easier for me to use. Another trick is to black base the part first, and then lightly coat on the white. For some odd reason, it's easier for me to avoid over-spraying white on that.
12 June, 16:09
Clement
Mr Surfacer 1500 White is also a good option if you need a white "paint" with high coverage.
You can polish it afterwards or layer a coat of regular white paint if need be.
Being 1500, it's pretty smooth anyway.
Great mustang, Jakub. I'm looking forward to see it done 🙂
Mr Surfacer 1500 White is also a good option if you need a white "paint" with high coverage.
You can polish it afterwards or layer a coat of regular white paint if need be.
Being 1500, it's pretty smooth anyway.
Great mustang, Jakub. I'm looking forward to see it done 🙂
12 June, 16:45
Moreno Baruffini
Well, since I'm also building a p-51 (different molds), I can only say that I have still to learn and practice a lot 🙂
Well, since I'm also building a p-51 (different molds), I can only say that I have still to learn and practice a lot 🙂
12 June, 19:13
Jakub Fiala
Dík, Máro! V pondělí ho dotáhnu na klub. Stojím před velkým dilematem a budu potřebovat hromadnou konzultaci 😄
Dík, Máro! V pondělí ho dotáhnu na klub. Stojím před velkým dilematem a budu potřebovat hromadnou konzultaci 😄
13 June, 11:17
Sergej I
Great looking little bird! What did you coat over the alclads with? If anything?
Great looking little bird! What did you coat over the alclads with? If anything?
20 June, 13:35
Jakub Fiala
Thank you, Sergej!
There is no coat over any color. The silver color on wings (LP-11) is polished, Alclads are untouched. I hope no varnish is needed. But i will see after decals....
Thank you, Sergej!
There is no coat over any color. The silver color on wings (LP-11) is polished, Alclads are untouched. I hope no varnish is needed. But i will see after decals....
21 June, 11:49
Sergej I
Thank you for the answer... brave, hoping all goes well and looking forward for results 👍
Thank you for the answer... brave, hoping all goes well and looking forward for results 👍
21 June, 12:51
Patrick Hagelstein
The decals do look stunning! Did you encounter any issues with setting solutions on the bare NMF parts?
The decals do look stunning! Did you encounter any issues with setting solutions on the bare NMF parts?
25 June, 08:08
Jakub Fiala
Thank you, Patrick. Luckily, no problem occurred with the setting solutions. But the decals are not fully set in panel lines yet. Photos are taken immediately after applying the decals. It is not visible on pictures, but there is still a lot of work to do.
Thank you, Patrick. Luckily, no problem occurred with the setting solutions. But the decals are not fully set in panel lines yet. Photos are taken immediately after applying the decals. It is not visible on pictures, but there is still a lot of work to do.
25 June, 11:53
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=uk
35
35
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo