Стрічка новин
Alec Kволодіє цим предметом
Avia S-199 Pilot and Mechanic / for Eduard and other kits
CMK (Czech Master Kits) 1:72
F72385 21 July, 20:11
David Smithдодав новий фотоальбом.
46 30 June, 11:44
David SmithI hadn't seen Konrad's build! I'm not promising the same attention to detail.
30 June, 20:38
David SmithThanks everyone for your generous comments. The kit is a bit fiddly in places - lots of thin struts and no location points - so I wouldn't recommend it for beginners. However, I must say that the finished result is all I could have hoped for. The 'look' of the finished article is just what I wanted and I thoroughly enjoyed building it. The canopy masking set and resin missile system were superb. The decals too, although I only needed a tiny proportion of what was on the sheet.
21 July, 20:10
Alec Kволодіє цим предметом
RAF Pilot Sitting in Cockpit w/Monkey on Shoulder + 2 Mechanics, Western Desert
CMK (Czech Master Kits) 1:72
F72344 2018 Нова прес-форма 21 July, 20:10
Alec Kволодіє цим предметом
German WWII personnel for Meillerwagen V2 transporter Special Armour
CMK (Czech Master Kits) 1:72
F72304 2016 Нова прес-форма 21 July, 20:10
Alec Kволодіє цим предметом
Afrikakorps Soldier Riding Camel 3D Printed
CMK (Czech Master Kits) 1:72
F72388 (129-F72388) 2023 Нова прес-форма 21 July, 20:09
nikfrostдодав новий фотоальбом.
13 27 April, 16:38
nikfrostThanks Bozzer! I think I'm getting the hang of this gloss finish also...hopefully.
8 July, 20:23
Mr DNice 👍 very nice, the cast texture on the engine looks good, it's the prv V6 is it ?
I had an RC version as a kid .
Will look fantastic when the decals go on.
👌
12 July, 20:58
nikfrostThe cast texture is Tamiya flat aluminium XF-16 very poorly sprayed by me haha, I think it was drying on its way from the airbrush to the surface and kind of built up.
12 July, 21:26
Mr DWorked well to the effect 👍 Tamiya dries really fast , l use Velejo mostly, l found Tamiya to fast n thickens up in the pot, Velejo doesn't harden like Tamiya n definitely needs good clear coat.
Nice project 👍
14 July, 16:14
nikfrostI always put a dollop of tamiya lacquer thinner in and two mixing balls, seems to keep it moving quite well.
14 July, 21:12
Rob K.додав новий фотоальбом.
2 21 July, 19:26
Rob K.The scale is 1/48. I am new to scalemates. Just joined. Trying to find this post. Under which header/subject are you able to see this album? I am unable to find this post where everyone can see it. Thanks
21 July, 20:08
LEM Kits 1:144
Dave Normanдодав новий фотоальбом.
21 July, 20:05
Danny Hoogstraatenхоче цей предмет
Lioré-et-Olivier LeO.451
POMK (Pend Oreille Model Kits) 1:48
4830 21 July, 20:06
Roland Sachsenhoferдодав новий фотоальбом.
24 7 July, 09:05
Roland SachsenhoferThis project has been waiting long enough, now the time has come! The "shell", seen here, is quickly put together, the glued seams are still wet, so to speak. I plan to show the A90 in a proper dio - gliding just above the water!
7 July, 09:08
TreehuggerI just remembered, I have this kit in my stash.
Are those windows on the side? Like on passenger jets?
7 July, 18:13
Roland SachsenhoferIf this was some kind of passenger aircraft, I would book a flight for sure. 🙂
I will drill the windows and fill them with Krystal Klear.
7 July, 18:25
Roland SachsenhoferThank you both for interest and comments! Well, I will think over with that windows.... Thank you for the link!
8 July, 06:46
Raz1I stand corrected. I had originally not seen the windows. Thanks, Skyhiker.
Plenty of interior photos here: flickr.com/photos/la..597/with/45021731405
And the last surviving example (per Wikipedia) is here: museum-vmf.ru/
Even though the appropriate page won't load here, a photo displays in the top-of-page banner rotation.
8 July, 14:30
Roland SachsenhoferI agree, what pictures! The question of the windows should now also be answered "from the inside" as well. Thanks for these excellent links, mates!
9 July, 12:40
Roland SachsenhoferA few new pictures here too: the finished pre-shading has shown a few touch-up needs, but tomorrow I want to be able to apply the surface colour!
11 July, 15:21
Michael KohlProbably too late, but that project would have been perfect to try a levitation display.
amazon.de/Magnetic-L..aps%2C127&sr=8-3
11 July, 17:27
Roland SachsenhoferI think it's a really wonderful idea.... A few Star Wars themes are in the making, possibly here: I would also like to see a Tie-Fighter hovering over this base.
A nice encounter - magnets are actually being used in this project! Since I want to show the "Orlyonok" gliding over a water surface as well as standing still, I have prepared two versions of the props. In order to be able to change them stably, I attached magnets to the axis of rotation. The one on the engine was inserted through a hole from the outside. It sits on the tip of a toothpick, which has been inserted through the hole in the inside of the engine. The magnet now sits exactly in the centre of the engine diameter. The second magnet only had to be glued to the two ends of the propeller axles. Now, it works perfectly with a soft "click"! 🙂
12 July, 06:56
Roland SachsenhoferThe Oryonok still looks a bit 'artificial', but in principle shows its surface colours, which will hopefully breathe a little life into it, are the traces of use and wear that I will still apply. The windows on the fuselage will of course also be drilled out and filled with clear white glue.
At the same time, the water base is now being worked on. This time I'm using a light filler on a polystyrene base as a base for this, with Vallejo water gel on top.
The magnetically interchangeable ahrwerk and propeller have worked - which is great news of course!
17 July, 17:34
Roland SachsenhoferA few pictures of the water base in the making: I'm using a new material to build up the water surface. This so-called 'light filler' dries within 24 hours and is easy to shape with the appropriate tools - here with a simple brush
18 July, 11:51
Robert PodkońskiJust a suggestion, Roland - an ekranoplan flying above the sea 'irons out' the waves under its wings in a characteristic manner:
oldmachinepress.com/..rlyonok-ekranoplans/
18 July, 14:43
Roland SachsenhoferRobert, thank you for that important hint, I wasn't aware of this!
18 July, 14:47
Roland SachsenhoferRobert, your hint made me to rethink and rebuild the whole thing a bit: the strip of water flown over is no longer deeply furrowed, but has been flattened - the picture material helped a lot.
You can see the whole thing now primed with Tamiya acrylic paint and coloured once, tomorrow transparent water gel from AK will be applied...
18 July, 18:18
Robert PodkońskiWater looks already like on these photos, Roland. I cannot wait to see the plane levitating above the waves...
18 July, 19:47
Roland SachsenhoferBefore I continue with pictures of the water base that was completed today, I'll show you a few snapshots of the completed 'Orlyonok'. As you know, I made it with interchangeable modules for both a land and a flying display; here you can see the 'land version'.
Tomorrow there will certainly be an opportunity to catch the aircraft flying by and photograph it in flight. 🙂
21 July, 18:12
Ben Mvery realistic. the weathering and the land diorama came out perfectly. can't wait to see it on the water!
21 July, 20:04
Desert Marlinдодав новий фотоальбом.
16 8 November 2023, 21:10
Desert MarlinThis project will have both pilots on the intercom and watching the engine startup process. That is why the same type figure is used in both cockpits. They both monitor the engine to ensure that the EGT and RPM is increasing appropriately. Each has their hand on the control stick to be able to open their MIC as they confirm everything is normal at start. The plan is to have the aircraft loaded with a Nuke (Apache Cruise Missile?). Seems appropriate to me for the days we live in now...
8 November 2023, 22:16
TreehuggerMaybe go for resin seats as well?
Seems like kit plastic never can compete with resin seats. 🙂
Though, I no longer crave for resin interior for the cockpit because of the work, but seats are ok.
9 November 2023, 05:17
Desert MarlinI'll paint these up and see if I can tolerate them. If they are too bland, I have time to change my mind! Thanks for the idea!
9 November 2023, 21:25
Desert MarlinGreat video of the weapon that goes with this version of the Mirage 2000N
Youtube Video
25 November 2023, 00:46
Desert MarlinAs I have begun work on this kit, I am yet again struck by the lack of information in the variations and options provided in the kit. For example, the tail tip is not called out that applies to the 2000N version. While the nose of the 2000D is provided in the kit, it has to be modified to make it correct for the 2000N. Oh bother…
20 July, 02:40
Desert MarlinSelected "most appropriate" tail tip and mounted the correct nose to fuselage.
21 July, 20:04
Tony Starkдодав новий фотоальбом.
7 зображення
1/72''' Airfix BAe Hawk T.1 XX219 "The Grey One" aka "Thomas"
1:72
And other than the stencil decals I haven't got, she's done!
16 7 May, 00:21
Tony StarkI'll prepare all you guys who are watching this.
I'm going to be decalling this up as a what if model.
There are several decal options I have of the RAF Grey Hawk scheme that will go to waste and one of the decals I used on this aircraft broke so I've used a mixed match of decals from all of them to create a special scheme celebrating all the Grey Hawk T.1's at RAF Chivenor.
20 July, 06:17
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=uk
35
35
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo