Стрічка новин
Derek Post
хоче цей предмет
хоче цей предмет
North American Rockwell
OV-10 Bronco - FOD Covers for ICM Quickboost 1:48
QB 49 024 2022 Нова прес-форма 26 August, 06:33
Roland Sachsenhofer
додав новий фотоальбом.
додав новий фотоальбом.
8 25 August, 10:13
Roland Sachsenhofer
These four pictures begin a project that should result in one of the largest models I have ever attempted. Not the biggest - the 1:32 Liberator holds my record here - but close!
However, the impressively large box contains surprisingly little and, also surprisingly, large components such as the fuselage, wings and tailplane are already assembled. Incidentally, these are made of fibreglass and require their own treatment.
These parts are also stable and clean. A bit of filling was required, as the traces of glue and filler on the seams are very rough and show air pockets. This will now be sanded, the cockpit sawn out and the windows drilled - well, modelling a little differently than usual! 🙂
These four pictures begin a project that should result in one of the largest models I have ever attempted. Not the biggest - the 1:32 Liberator holds my record here - but close!
However, the impressively large box contains surprisingly little and, also surprisingly, large components such as the fuselage, wings and tailplane are already assembled. Incidentally, these are made of fibreglass and require their own treatment.
These parts are also stable and clean. A bit of filling was required, as the traces of glue and filler on the seams are very rough and show air pockets. This will now be sanded, the cockpit sawn out and the windows drilled - well, modelling a little differently than usual! 🙂
25 August, 10:20
Treehugger
The panel lines look ok I guess. I mean, I would be happy with those panel lines.
The panel lines look ok I guess. I mean, I would be happy with those panel lines.
25 August, 11:26
Mr D
Like it , nice project.
I'm working on the Beriev Be-6 Armoured Flying boat,
Revisiting a kit after 33yrs.
All the best with yours...😃👍👍
Like it , nice project.
I'm working on the Beriev Be-6 Armoured Flying boat,
Revisiting a kit after 33yrs.
All the best with yours...😃👍👍
25 August, 11:52
Robert Podkoński
A true behemoth it is. I will surely follow this build with utmost interest!
A true behemoth it is. I will surely follow this build with utmost interest!
25 August, 13:15
gorby
Looking forward to seeing this take shape. 🙂
I believe the last Mars had it's final flight two weeks ago.
Youtube Video
Youtube Video
Looking forward to seeing this take shape. 🙂
I believe the last Mars had it's final flight two weeks ago.
Youtube Video
Youtube Video
25 August, 13:22
Roland Sachsenhofer
I am very happy about all your interest! In fact, I also started this project because of its topicality; the pictures of the last flight of Hawai Mars are always a heart-warming pleasure; this one in particular, thanks Gorby for posting it!
Today I drilled the openings for the windows in the fuselage; I determined the diameter of the holes from kit glass parts. They seem a bit big to me, but we'll see. As I'm not going to use the clear parts from the kit, but want to make them with Klearfix, I could reduce the diameter quite a bit.
The next steps will be to finish sanding the fuselage seams - now only the top side has to be done - and then to glue the wings and stabilisers to the fuselage. To do this, I'm cutting solid steel rods to length, which I'll glue in place with a two-component adhesive.
The Mars should be ready by mid-October: I want to take it to the Euromodel in Ried, Upper Austria.
And yes, In fact, the more or less finished Fairchild F.91 had to serve as a scale model in the background! 🙂
I am very happy about all your interest! In fact, I also started this project because of its topicality; the pictures of the last flight of Hawai Mars are always a heart-warming pleasure; this one in particular, thanks Gorby for posting it!
Today I drilled the openings for the windows in the fuselage; I determined the diameter of the holes from kit glass parts. They seem a bit big to me, but we'll see. As I'm not going to use the clear parts from the kit, but want to make them with Klearfix, I could reduce the diameter quite a bit.
The next steps will be to finish sanding the fuselage seams - now only the top side has to be done - and then to glue the wings and stabilisers to the fuselage. To do this, I'm cutting solid steel rods to length, which I'll glue in place with a two-component adhesive.
The Mars should be ready by mid-October: I want to take it to the Euromodel in Ried, Upper Austria.
And yes, In fact, the more or less finished Fairchild F.91 had to serve as a scale model in the background! 🙂
25 August, 14:11
Thomas Mayer
Du bist echt eine Bau-Maschine, Roland! Und immer kommt etwas sehr schönes raus! 👍
Du bist echt eine Bau-Maschine, Roland! Und immer kommt etwas sehr schönes raus! 👍
25 August, 14:26
Thomas Steinke
володіє цим предметом
володіє цим предметом
Lotus Ford Type 79: Front and rear suspension
Falcon Scale Models 1:20
FSM-11-C 26 August, 06:29
Thomas Steinke
володіє цим предметом
володіє цим предметом
Lotus Ford Type 79: Air funnels
Falcon Scale Models 1:20
FSM-12-C 26 August, 06:29
CasModeler
додав новий фотоальбом.
додав новий фотоальбом.
9 2 August, 04:14
yngvenett
Following this to learn. If possible, please include some pictures of how you make the rear lights and blinkers look realistic. I'm really struggling with it 🙈
Following this to learn. If possible, please include some pictures of how you make the rear lights and blinkers look realistic. I'm really struggling with it 🙈
25 August, 10:18
CasModeler
1. Lights. You have to paint it using clear paints and rapid thinner. (dry coats high psi 20-25. )Then dip it into floor varnish. It makes clear parts more transparent. The last thing will be to glue a transparent film(foil)on the back of the lights. for example hasegawa mirror finish.
1. Lights. You have to paint it using clear paints and rapid thinner. (dry coats high psi 20-25. )Then dip it into floor varnish. It makes clear parts more transparent. The last thing will be to glue a transparent film(foil)on the back of the lights. for example hasegawa mirror finish.
25 August, 13:53
István Szücs
Great work so far! The dash is amazing, the chassis looks like the real one!
Great work so far! The dash is amazing, the chassis looks like the real one!
25 August, 18:44
CasModeler
@Istvan
Anyway, not my best build. Paint job is not perfect because I experimented with thin coats and unfortunately metallic coat is too thin.
@Istvan
Anyway, not my best build. Paint job is not perfect because I experimented with thin coats and unfortunately metallic coat is too thin.
26 August, 06:27
Marko
додав новий фотоальбом.
додав новий фотоальбом.
26 зображення
Grumman Bearcat F8f „Smirnoff' Darryl Greenamyers RacerНовий: 25 August, 12:11 1:72
Проект: Bearcat F8f Racer (1965-67)
Scratchbuilt
19 24 June, 21:08
Robert Podkoński
Awesome job, Marko! Chapeau bas! I have not grown confident enough yet to tackle any of HPM kits...
Awesome job, Marko! Chapeau bas! I have not grown confident enough yet to tackle any of HPM kits...
25 August, 13:13
Marko
gorby, robert and curatorm I'm very happy that you like my model, I'm also very happy with the result myself,
gorby: your scratch-built unique pieces always impress me and I'm excited about your current project.
Robert: in your experience I say; go ahead and you will be rewarded with a beautiful result.
gorby, robert and curatorm I'm very happy that you like my model, I'm also very happy with the result myself,
gorby: your scratch-built unique pieces always impress me and I'm excited about your current project.
Robert: in your experience I say; go ahead and you will be rewarded with a beautiful result.
25 August, 15:54
CasModeler
додав новий фотоальбом.
додав новий фотоальбом.
28 28 April, 09:37
Ricard Gomicia Calatayud
great job! I don't know if I'd be abme to dirt it after finishing it hahaha
great job! I don't know if I'd be abme to dirt it after finishing it hahaha
3 July, 21:45
CasModeler
@Ricard
Of course you can do wash after finishing. Just use enamel/acrylics paints and pigment(pulver).
@Ricard
Of course you can do wash after finishing. Just use enamel/acrylics paints and pigment(pulver).
4 July, 19:30
Ricard Gomicia Calatayud
the rear wheels have a very bad alignment. What happened there?
the rear wheels have a very bad alignment. What happened there?
25 August, 20:19
CasModeler
@Ricard.
The axle broke through my fault and the wheel is unstable. I have to repair it.
@Ricard.
The axle broke through my fault and the wheel is unstable. I have to repair it.
26 August, 06:24
Fredy L
володіє цим предметом
володіє цим предметом
Real Grade
RX-93 Nu Gundam E.F.S.F. Amuro Ray's Use Mobile Suit for New Type Bandai Spirits 1:144
5057842 (032) 2019 Нова прес-форма 26 August, 06:18
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=uk
35
35
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo