Стрічка новин
JP1965
володіє цим предметом
володіє цим предметом
Sd.Kfz.250² BOX Sd.Kfz.250/1 + Sd.Kfz.250/3 "GREIF" + 1/16 Erwin Rommel
Takom 1:35
2194W 2024 Набір моделей Багато тем (2)19 November, 10:38
JP1965
володіє цим предметом
володіє цим предметом
Czechoslovak People's Army MiGs against Thunders 1953-59
DP Casper 1:48
48006 2024 Нова прес-форма Багато тем (6)19 November, 10:37
JP1965
володіє цим предметом
володіє цим предметом
The first combat action of the post-war Czechoslovak air force Akce B 1946-1947
DP Casper 1:48
48005 2024 Нова прес-форма Багато тем (7)19 November, 10:37
Spanjaard » Запити щодо функцій
I would suggest to merge all super-hobby shops (and eliminate a few duplicates) and have a "generic one" just called "supper-hobby" and avoid new "supper-hobby" ones to be added. At the end, it is just one shop, that has created domains all around Europe. currently, the coincidences between our wishlist and their stock, appear only under super-hobby.nl, even if the mate is checking from Australia.
I would suggest to merge all super-hobby shops (and eliminate a few duplicates) and have a "generic one" just called "supper-hobby" and avoid new "supper-hobby" ones to be added. At the end, it is just one shop, that has created domains all around Europe. currently, the coincidences between our wishlist and their stock, appear only under super-hobby.nl, even if the mate is checking from Australia.
19 November, 08:42
bughunter
There are more problems: if I hover with the mouse on a kit page/Marketplace over the button it says "Order now on super-hobby.de" (where I'm logged on), but after a click for me mojehobby.pl opens, where I'm not logged on.
There are more problems: if I hover with the mouse on a kit page/Marketplace over the button it says "Order now on super-hobby.de" (where I'm logged on), but after a click for me mojehobby.pl opens, where I'm not logged on.
19 November, 10:30
Gabriele Fuller-Gooley
володіє цим предметом
володіє цим предметом
RAAF 6 Sqn EA-18G Growler Roll Out Scheme 2015 & VAQ-129 Viking Trainer
Ronin Decals 1:48
RDS-092 2017 Нова прес-форма 19 November, 10:28
Michał Witkowski
хоче цей предмет
хоче цей предмет
Seiran M6A1 Painting mask for Tamiya kit (60737) "yellow kabuki paper"
Clear Prop! 1:72
CPA72062 2021 Нова прес-форма 19 November, 10:23
Tony Stark
додав новий фотоальбом.
додав новий фотоальбом.
21 зображення
1/72 Academy Boeing KC-97R StratocruiserНовий: 19 November, 10:22 1:72
Sprayed using Halfords "Ford Stardust Silver" sprey can over Poundland's Matt Black base.
21 5 April, 22:47
Tony Stark
Once I have finished the 2 HHrAviation F-16's I will be starting this enormous beauty.
Once I have finished the 2 HHrAviation F-16's I will be starting this enormous beauty.
17 October, 15:38
Simon O'Gorman
додав новий фотоальбом.
додав новий фотоальбом.
74 зображення
Making the Moth1:72
And there it is! I'd be embarrassed to say how long this took, and it's packed full of mistakes and semi-mended disaster...
Проект: Tiger Moth
61 19 February 2023, 12:45
Simon O'Gorman
I felt very uncomfortable cutting out the fuselage sections - I'd never done that before - but with the doors dropped open it means the cockpit will be more open.
I felt very uncomfortable cutting out the fuselage sections - I'd never done that before - but with the doors dropped open it means the cockpit will be more open.
22 February 2023, 14:12
Simon O'Gorman
Ah, cool! It's my first go at airbrushing and all going very slowly. But I'll get there in the end.
Ah, cool! It's my first go at airbrushing and all going very slowly. But I'll get there in the end.
26 February 2023, 23:23
Alex K
Me too... I've built the ancient-tool Airfix, but I have also bought the new one, and watching your work progress helps a lot.
Me too... I've built the ancient-tool Airfix, but I have also bought the new one, and watching your work progress helps a lot.
9 April 2023, 18:27
Simon O'Gorman
Ah, look forward to seeing how you go lads. I'm no expert I'm afraid but you may pick up some tips as to what not to do
🙂
Ah, look forward to seeing how you go lads. I'm no expert I'm afraid but you may pick up some tips as to what not to do
🙂
9 April 2023, 19:39
Andy Ball
Terrific journalism on this build, I see the learning curve has yielded results! Bravo.
Terrific journalism on this build, I see the learning curve has yielded results! Bravo.
6 June 2023, 06:39
Simon O'Gorman
Thanks Andy, I'm recording the all the disasters along with the little wins. And the learning curve has been dramatic!
Thanks Andy, I'm recording the all the disasters along with the little wins. And the learning curve has been dramatic!
6 June 2023, 16:33
Simon O'Gorman
Thank you Ethan, and to everyone above. Encouraging comments are like a little shot adrenaline. They are all very much appreciated.
Thank you Ethan, and to everyone above. Encouraging comments are like a little shot adrenaline. They are all very much appreciated.
7 June 2023, 05:38
Simon O'Gorman
Thanks Luke, to be honest I couldn't tell if the model was fiddly or I wasn't doing it right.
Thanks Luke, to be honest I couldn't tell if the model was fiddly or I wasn't doing it right.
17 November, 17:54
Ben M
I built that kit too, and it's tricky to get all the struts and such for the upper wing
I built that kit too, and it's tricky to get all the struts and such for the upper wing
17 November, 21:18
Simon O'Gorman
Yeah, that was really tricky for me too, Ben. Huge learning curve! What I should have done was glue the outer struts to the bottom and dry-fitted the top until it was set - then glued the centre struts into the top wing, and put the two together. Getting this wrong can ruin the build.
Yeah, that was really tricky for me too, Ben. Huge learning curve! What I should have done was glue the outer struts to the bottom and dry-fitted the top until it was set - then glued the centre struts into the top wing, and put the two together. Getting this wrong can ruin the build.
17 November, 21:23
Ben M
I did the center ones first, glued top wing on, and then fit the outboard ones: Leger VVC Batavia Tiger Moth | Album by Bourgeois Detailism (1:72)
I did the center ones first, glued top wing on, and then fit the outboard ones: Leger VVC Batavia Tiger Moth | Album by Bourgeois Detailism (1:72)
17 November, 21:34
Simon O'Gorman
Just looked at your album Ben, a really nice build. Loved your prop and the rigging looks great. Very nice!
Just looked at your album Ben, a really nice build. Loved your prop and the rigging looks great. Very nice!
17 November, 23:20
Robert Podkoński
Great job, Simon! Thanks for your suggestions - I intend to built one too.
Great job, Simon! Thanks for your suggestions - I intend to built one too.
18 November, 08:57
NickA
Good outcome, this was the first biplane I had made for decades and it ended up looking like one too! I then built Airfix's 1/48 offering which goes together even better. I just need the courage to attempt some rigging.
Good outcome, this was the first biplane I had made for decades and it ended up looking like one too! I then built Airfix's 1/48 offering which goes together even better. I just need the courage to attempt some rigging.
18 November, 16:22
Simon O'Gorman
Me too Nick, need to summon some rigging courage for the next biplane. I don't feel ready, but I guess you probably never feel ready.
Me too Nick, need to summon some rigging courage for the next biplane. I don't feel ready, but I guess you probably never feel ready.
18 November, 16:30
Michael Schubert
Love it! I just got the top wing set on mine and promptly dropped it and it fell into 3 pieces 🤦🏻♂️ turned out ok, but a close look shows its flaws haha, the colour scheme you chose is cool and it turned out great 👍
Love it! I just got the top wing set on mine and promptly dropped it and it fell into 3 pieces 🤦🏻♂️ turned out ok, but a close look shows its flaws haha, the colour scheme you chose is cool and it turned out great 👍
19 November, 08:13
Simon O'Gorman
Aaaaaah, Michael! I feel your pain. Mine shows its flaws on close inspection too. Glad it tuned out okay. And thank you for your kind words.
Aaaaaah, Michael! I feel your pain. Mine shows its flaws on close inspection too. Glad it tuned out okay. And thank you for your kind words.
19 November, 09:28
Nicolas
Hey Simon, nice to see that you have successfully completed the build. I can well understand that you don't fancy the bracing, I'm currently doing that on my Christen Eagle.
Hey Simon, nice to see that you have successfully completed the build. I can well understand that you don't fancy the bracing, I'm currently doing that on my Christen Eagle.
19 November, 09:42
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=uk
35
35
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo