Стрічка новин

Guy Rump
Another to add to my RAF post war collection. 🙂

Nicolas
Watching

Guy Rump
Made a start on this kit with the cockpit which is quite basic to say the least, part of the reason I put the pilot and navigator in. 🙂

Welcome Nicolas, pull up a seat. 👍

Many thanks mates for your interest and likes Freak, Andrew B, Istvan S, Villiers DV, J35J, Andre K, Juskifo, Tommy A, NordMito & 1 other mate. 👍

Guy Rump
Added cockpit to the upper fuselage. Lower parts of the tail added to the lower fuselage. Wings and folding mechanism added to lower fuselage. Weight added to the lower part of the nose. I wasn't certain how much to add as there is no indication in the instructions. 🙂

Guy Rump
Fuselage now together and bits of filler here and there. 🙂

Many thanks mate for your interest and like Matti T. 👍

Guy Rump
Just the jet engine intakes added this week as have been away. On the right hand side I had to cut and sand as there was a big extra part of moulding plastic in the way. 🙂

Guy Rump
Canopy masked and fixed. Primer added. 🙂

Guy Rump
Hataka Medium Sea Grey added as the main colour. Tail sprayed Hataka Jet Black. 🙂

Guy Rump
Tail now attached and the rest of the jet black (Hataka) has been added to the middle of the aircraft. Next will be painting the nose and the rear engines. 🙂

Many thanks mate for your interest and like Mr D. 👍

Ekki
Watching.

Guy Rump
Nose painted Hataka light grey and wing tips Hataka jet black. 🙂

Welcome Ekki. 👍

Many thanks mate for your interest and like Sergej I 👍

Guy Rump
Decals now on, next will be the undercarriage and weapons. 🙂

Many thanks mates for your interest and likes Tcamp, Patryk S & Randy K. 👍

Guy Rump
I call this completed. The plane denoted is a Tornado from 111 (F) Sqn, RAF Leuchars in 2010.

111 (Fighter) Sqn converted to the Tornado F3 from the Phantom FGR.2 in 1990 at RAF Leuchars in Scotland. Its main role there was as a part of the UK's Quick Reaction Alert to identify and if necessary, destroy hostile aircraft entering UK air space. The Sqn also carried out air operations over Bosnia in 1994/95 and took an active part on Operation Telic commanded by Wing Commander Rob Birch in 2003. 111 Sqn was the last RAF Sqn to operate the Tornado F3 and was disbanded in 2011.

Many thanks mates for your interest and likes Sergio O & Moreno B. 👍

J35J
Great work!👍🏻

Nicolas
Looks good.

Guy Rump
Many thanks for your kind comments J35J & Nicolas, I greatly appreciate them. 👍

Many thanks mates for your interest and likes Neuling & Mirko R. 👍

Thomas Bischoff
French beauties deserve more pics 👍

Michael Kohl
I agree.
From the times Citroën still built Citroëns.

Guy Rump
I forgot to put this in the ideas so it is starting "in progress".

Made a start with the cockpit and some weight in the nose, hopefully it's enough. 🙂

Nicolas
Following

Villiers de Vos
This will not be a tail sitter! Also booking my seat.

Guy Rump
Fuselage together, undercarriage fitted and aircrew added. 🙂

Welcome Nicolas & Villiers, thanks for your interest. 👍

Many thanks mates for your interest and likes NordMito, Matti T, Villiers DV & J35J. 👍

Robert Podkoński
Taking a seat.

Bernd Grün
Promising start, Guy. 👌 Looking for the final result.

Guy Rump
Wings and tail plane added. 🙂

Thanks for stopping by Robert & Bernd, as always, you're both very welcome. 👍

Many thanks mates for your interest and likes Robert P, scaleffect & Bernd G. 👍

Guy Rump
The Gnat had the canopy added, masked and then primer applied (light grey). I have painted the yellow with 3 coats of Vallejo Model Air Medium yellow and 2 coats of Hataka BS Golden Yellow. Next will be the tail. 🙂

Many thanks mate for your interest and like Sukhoi242. 👍

Guy Rump
Tail now painted black with yellow. 🙂

S M
Nice Yellowjack!👍

Mr D
Good to see the yellow on it, dose look good in the yellow.
Takes your time on the landing gear, can be little fiddly.
Good stuff 👌, thanks for uploading

Guy Rump
Sprayed with gloss varnish and then added the decals. Next will be adding the wheels and other ancillaries. 🙂

Many thanks for your kind comments SM and Mr D, they are greatly appreciated. @ Mr D, The front landing gear was very difficult to get off the sprue so I know what you mean. 👍

Many thanks mates for your interest and likes SM & Mr D. 👍

Guy Rump
Now completed, this is a Folland Gnat from the Yellowjacks display team based at RAF Valley, Anglesey in 1964, a forerunner team of the Red Arrows. 🙂 The last photo is a picture of the actual aircraft.

Many thanks mates for your interest and likes Duster_d, JK, Franck D, Joseph L & Alex R. 👍

Mr D
Hi Guy.
Nice to see it finished 👍
Looking nice, be good addition to the collection, like the yellow rudder.
How did the yellow paint go ? Can be an awkward colour.
Nice job👌 good stuff 👍👍

Robert Podkoński
Lovely!

Nicolas
Nice result guy. 👍

Ekki
Well done!

Guy Rump
@Mr D, I used a very light grey primer followed by Vallejo Model Air Medium Yellow and then Hataka Trainer Yellow x 2 coats over that. They went on better than I expected. 🙂

Mr D, Robert, Nicolas & Ekki, many thanks for the very kind comments, I appreciate them greatly. 👍

Many thanks mates for your interest and likes Christian S, Mark B, Mr D, Cuajete, Alain C, RolfRolf & 1 other mate. 👍

Guy Rump
Many thanks mates for your interest and likes Nicolas & Mirko R. 👍

Guy Rump
Many thanks mate for your interest and like Tcamp. 👍

Guy Rump
Many thanks mates for your interest and likes Noel B & Randy K. 👍

Guy Rump
Many thanks mates for your interest and likes Anatoli S, Sergio O, Bozo & Mark S. 👍

Guy Rump
Many thanks mates for your interest and likes Cristian A, Rona & Arif S. 👍

Dave Flitton
Looking real good!

Ben M
👀

John Thomas
Very nice

Villiers de Vos
Very nice work.

Daniel Klink
Wonderful work👍

Alex K
Indeed - congrats 👍 👍

Agnius
Thank you! 🙏

Andrew P
Beautiful work!
How did you get it to sit on its nose and not on its tail?

Dominik Weitzer
love it! what a wonderful looking plane. well done!

bughunter
Lovely little Cessna 👍

Ben M
This is great. Warms my heart because a friend once let me take the controls of a 172.

Guy Rump
Very nice! 👍

Mark Sherwood
That's just lovely. 🤘🥸🤟

Agnius
Thank you, guys! 🙏 Andrew, despite the lead in and below the engine and additionally, below the instrument panel it was still the tail sitter. It's wheels are glued to the base to sit on it's nose 😀

Andrew P
Sneaky!
Looks great!

Ben M
You could try filling the tail with helium 🤔

Robert Podkoński
Lovely!

Zbynek Honzik
Very nice!

Michael Kohl
Nice to see a well done general aviation plane.

Ben M
👀

Marcin Dudek
A new build starte 🙂. It seems quite easy but one thing puzzles me - the tracks. They compose of 4 straight plastic parts and instruction says to bend them with hair dryer. It is first time I encountered this type of tracks. Anyone tried doing something like this?

Snake Plissken
I have heard of this type of assembly but have never built one. However, I have lots of experience heating and softening styrene plastic. You can also try very hot or boiling water -- soak the tracks in boiling water, then fish them out of the water with long tweezers and bend them around the rear sprocket, idler and road wheels and hold until they cool. You may even get by using no heat, just slowly and carefully bend curves into the tracks.

Marcin Dudek
Thanks for help Snake! That tip is very helpfull 🙂

Guy Rump
Following. 👍

Marcin Dudek
You're welcome Guy 🙂

Marcin Dudek
After some work done I need to say I am a little disappointed with this kit. Instruction includes some mistakes and it is not always easy to read how and where exactly a specific part should be located. More over I expected more from new molds (parts require a lot of work to remove additional plastic).

Snake Plissken
Hi Marcin. My advice is to *expect mistakes* and do your research accordingly. It may or may not be fun to research the T-55 but most of the photos or line drawings you can find online are free, it just takes some time.

Marcin Dudek
Sure thing Snake 🙂. References in the Net are more than sufficient.

Snake Plissken
Good job adding the injector lines on the engine. I overlooked it the first time. 👍

Marcin Dudek
Thanks Snake 🙂. I was considering adding some more parts to the engine but they wouldn't be visible after assembly so I left it as it is. Thanks one again for the track bending tips, they were very helpfull.