Стрічка новин

Robert Podkoński
Taking a seat, of course!

bughunter
Welcome Robert! Which one you want to take, the yellow or a green one? 😉

Please do not miss the project description, for the _VERY_ important reason for this project!

Robert Podkoński
👍 A green one, please 🙂

Marcel Klemmer
Hi Frank, I am in and do not need a seat. 😉

Ludvík Kružík
I'll sit down too. If I'm not mistaken, one green seat is still open. 😉

Spanjaard
I am certainly in

Martin Oostrom
Green two for me

David H
Be rude not to join in. 👍🏻

gorby
I'll join the audience as well. 🙂

bughunter
Hello my friends! A warm welcome to each and every one of you!

Working on the parts of this kit can be considered bodily harm! The bright yellow hurts your eyes and you can't see any details or damaged areas that need work. I would have preferred a more common gray!

Michael Kohl
Moin Frank. Nimmst mich mit?

bughunter
Aber sicher doch, wenn Du eine wilde Fahrt aushälst 😉

Kenneth
Hallo Frank, the set with lap belts only could be intended for the US Navy variant of the Stearman, the N2S. Until US entry in WW2, US Navy aircraft mostly did not have shoulder belts. I read this in a review of a 1/32 Vought Kingfisher while looking for seatbelts and wondering about the same thing for my 1/32 Revell/ICM N2S Stearman kit.

Juergen Klinglhuber
Schau ich mir auch an,...

bughunter
Welcome! Thanks Kenneth! That makes sense, as the kit offers also a yellow Navy plane with red stripes. Luckily my wife want it blue-yellow. All the pictures I found shows also shoulder belts, but that was mostly still flying machines and I guess the shoulder belts was added later.
I had already downloaded the ICM manual as an additional reference and looked at reviews because of an oddity on the upper wing. More on this later.

bughunter
Because I was still in soldering mode after the seats, I immediately turned my attention to the tank on the upper wing. I like the look of the metal fuel tank now.

Robert Podkoński
Perhaps you will find my photos useful for your build:
Hangar 10 | Album by podkon

bughunter
Yes, definitely 👍 Thanks!

bughunter
Found a nice page: stearman-aero.com/

bughunter
The wing is yellow again, but now the look is better!
I used here MRP-142 Orange Yellow. If someone remembers my Piper: the yellow was "Dark Chrome Yellow" also from MRP. Even this one here called "Orange Yellow" is looks more yellow compared to the Piper.

Oleg Bogolei
Great pair!

Alex
Great! Which colours did you use for the bluegrey Mirage?

Prieur Gaël
Hello Alex
I used AK real color RC252 and RC235 for the blue ones and the RC247 for the radome.

Alex
Thanks!

Christos Gravanis
Great collection of a great aircraft

Robert Podkoński
Another beautiful Mirage! Love it!

Rui S
Beautifully done, indeed 👍 great photos too.

Clement
Great work on both!

Neuling
I agree!

Vincent
Very nice! I thought there wasn't a good single seat mirage 2000 kit in 1/72 scale.

Prieur Gaël
Hi Vincent, now we have the Modelsvit range, the B is scheduled for early December.
Thanks to Modelsvit we also have the Mirage III family which is almost complete, there remain the planes modified by Israeli companies for Latin American countries

Nicolas
As soon as I finish one of my 3 current projects (2 of them ar nearly done) I will start with this little helicopter.

Nicolas
The build startet this weekend.

Nicolas
As I am covid positive (fortunately only with very mild syntomas) I had some time to build again today. So far I am positively surprised by the accuracy of fit. There are no locator pins, but I can now click the fuselage and cockpit together and even the tail section holds without glue.

Nicolas
I would like to do some rivets on the exteriour, but I couldn't find some good drawings. If somebody has a hint I would be grateful.

Nicolas
Today I started installing the controls. Doing so I noticed, the collectiv controls are missinh in the kit. So I started scratchbuilding them after photos. Also fabricated and installed blinds for the paxes.

Nicolas
Started some work on the exteriour.

Freak
Interesting project! Love the WIP pics and demo of various detailing techniques.

Nicolas
Hi Freak, welcome on board.

Shar Dipree
I have the same kit too. I'm really looking forward to your results. Following. 🙂

Nicolas
Hi Shar, welcome.

Łukasz Gliński
Cool, will watch. Still afraid to start mine 😄

Nicolas
Welcome Łukasz, there is no reason to be afraid. The fit seams quite good, and the missing details is somthin one can improve. 😉

Qwertzel
Sieht gut aus! Nehme auch mal Platz

Nicolas
Moin Quertzel, Danke für das Lob. Noch sind Sitze im Hubschrauber frei. 😉

bughunter
The Colani design is cool 👍 Have fun!
And I hope your covid is gone without bad effects!

Nicolas
Hi Bughunter, thanks.
Covid wasn't to bad, I got 3 day with mild syntomas and 5 days waiting for a negativ test. 😉

Mr D
Done some nice improvements Nicolas... Be worth it, it's good to do this as puts a nice personal touch on it, l need to pick up some card like you have used ( what is it l need to look for ?)
The 2 Revell models l built ...l found the decals took a bit more softening than others models l have done!? the decals said made in Italy....no company name.
Looking good 👍 be nice bright unusual one this 😁

Nicolas
Hallo Mr D and thanks.

You can look for plastic sheets and profiles (tubes, chanels, I-beams, etc,) from various manufacturers like AK or Evergreen or use packing material eg. most blisterpacks. 😉

Guy Rump
Looking good Nicolas, following. 👍

Mr D
Hi Nicolas, doing a good job on the extra detail bits.
Be worth it, you only get to build it once...so worth getting it how you want it.
Nice 👍👍👍

Nicolas
Hallo Guy & Mr D, welcome, have a seat.
Thanks for your compliments.

Kesa Tiho
Very nice build. Ive always been curious though, how do you get such a precise paint job. Especially with the interior.

Nicolas
Hi Kesa, I do most of the interior freehand with a small brush (mostly size 000, but details sometimes with size 10/0) and well diluted paint. You kan put your brushhand onto the hand holding the part to reduce shaking.

Mr D
Looking good Nicolas 👍
Taking good shape now.
What do you use for a primer??
😃👍

Nicolas
Thanks Mr. D. I used Mr. Hobbys Aqueous white surfacer 1000.

Nicolas
After sanding, priming and repainting the helicopter several times today, there's not much new here, but I used the drying time as much as possible to start on the first figures for the diorama.

Nicolas
The helicopter was sanded, primed, filled and primed again today. In the meantime, I'm almost satisfied with the result. Visible progress has only been made on the figures.

Finn
Following

Mr D
Like the window shade's 👍

Nicolas
Welcome Finn, thanks Mr D.
After 2 weekends without crafting (1x at an exhibition, 1x food poisoning) the work continues here. I have started painting the figures. I was also able to start on the diorama base plate. This represents the windowless top floor of a high-rise building in which the technology such as elevators, fire water supply or air conditioning is located. A subsequently mounted helipad is then installed on the roof.

Patrick Hagelstein
Hi Nicolas! Sorry to hear that you were ill... Hopefully things are getting better now! I'm also sorry you had to scrub those Preiser figures as Preiser offers these exact figures in 1/72 in bare white plastic as well. I had my local hobby shop (in Aachen) order them for me from the Preiser catalogue. Maybe something for a next project?

Michael Kohl
Some work is going into this. Keep it up.

Mr D
Hi Nicolas 👋 glad your getting back to a bit of modeling... Diorama sounds interesting 👍

Nicolas
Welcome Michael & Patrick
@ Patrick: I know, I have already used the unpainted figures in another project. But unfortunately I couldn't get them from the local dealer or on ebay or similar.

Cuajete
Well done so far 👍

Nicolas
Thanks

Patrick Hagelstein
Ah, Ok! But luckily, you are aware of their existence. ☺️👍🏼

Cuajete
Interesting construction of barbed wire 👌

Xa Char
Thank you Cuajete, cheap and easy.. 😉

Steven Van Dyck
Proficiat, sorry I couldn't be there yesterday.

Nik Watson
Superb, lots of detail in a small scene. Love the barbed wire technique. 👏👏🍻

Bas Tonn
Great !!
How did you make thise trees if I can ask?

gorby
Nice dio!
I like the idea to make barbed wire as well.

Xa Char
Thanx Steven, Nik and Bas 🙂

Bas,
Trees are made with old trees from a railroad, cleaned from "leaves". Then I glued branches of zeeschuym with CA glue and painted the whole tree brown.
For leaves I have mixed some dried parsly in small pieces and used those for leaves.

Xa Char
Thanx Gorby

Cuajete
Wow... fantastic scene. Great result! 👌
Congrats!

More pics, please?
What is "zeeschuym"?
Thanks!